|
39374
|
notsponsored by @zyluxXD | Stardance
|
zyluxXD
|
0
|
8.0
|
0
|
[]
|
[{"post_id": 37762, "ts": "202 [{"post_id": 37762, "ts": "2026-07-30T17:55:50Z", "hours": 1.0, "text": "Bugs. bugs. bugs. Literally the most annoying things ever, both in real life and in programming. Watched YouTube videos, found ones w/ sponsors, and if it wasn’t detected by the local detection, fix it. Fixed bug where SponsorBlock-based detection was making the skipping not work. And I also added this lil popup window that lets you customize from where detections are, as well as a inwards time trim. The inwards time trim is nice because its customizable and lets you see just a little bit of the sponsor part, so you don’t miss any other content."}, {"post_id": 37320, "ts": "2026-07-29T22:48:36Z", "hours": 2.0, "text": "I added part of the UI (yay!!!!). Now when a sponsor is upcoming, this little popup shows. If you click any button, it disappears and doesn’t skip the sponsor. (Also yes that’s a Minecraft video in the background) I still need to add the main UI and some other stuff. Other things I did: Fixed random bug in local detection Fixed bug where no skipping occurs if a ad had previously played"}, {"post_id": 36564, "ts": "2026-07-28T19:21:58Z", "hours": 5.0, "text": "Finally finished the local detection algorithm! this took quite a while to do, and this wasn’t even the first algorithm I had to make for this. So originally, I made a thing where it loads a small sentence transformer in the background, and uses the video transcript to create vector embedding, on which it uses for detection. This worked sometimes, but it also failed a lot of the times. I kinda gave up on that approach since it didn’t seem like it was going to go anywhere, so instead I decided to build a non-ml version that uses hysterics and an analysis algorithm to find out segments that are sponsors. But this algorithm is just a backup, as the main source of detection is the existing SponsorBlock API, which uses user reports to skip video sponsors. However, as this can’t work for any video, the local fallback is there! I also made it be able to actually skip a sponsored segment too. Next steps are probably adding a UI, improving extension frontend, improving browser support, and making it more robust. (rn the photo is just the extension loaded in because it doesn’t have a UI yet)"}]...
|
Title: notsponsored by @zyluxXD | Stardance
Devlo Title: notsponsored by @zyluxXD | Stardance
Devlogs:
Finally finished the local detection algorithm! this took quite a while to do, and this wasn’t even the first algorithm I had to make for this. So originally, I made a thing where it loads a small sentence transformer in the background, and uses the video transcript to create vector embedding, on which it uses for detection. This worked sometimes, but it also failed a lot of the times. I kinda gave up on that approach since it didn’t seem like it was going to go anywhere, so instead I decided to build a non-ml version that uses hysterics and an analysis algorithm to find out segments that are sponsors. But this algorithm is just a backup, as the main source of detection is the existing SponsorBlock API, which uses user reports to skip video sponsors. However, as this can’t work for any video, the local fallback is there! I also made it be able to actually skip a sponsored segment too. Next steps are probably adding a UI, improving extension frontend, improving browser support, and making it more robust. (rn the photo is just the extension loaded in because it doesn’t have a UI yet)
I added part of the UI (yay!!!!). Now when a sponsor is upcoming, this little popup shows. If you click any button, it disappears and doesn’t skip the sponsor. (Also yes that’s a Minecraft video in the background) I still need to add the main UI and some other stuff. Other things I did: Fixed random bug in local detection Fixed bug where no skipping occurs if a ad had previously played
Bugs. bugs. bugs. Literally the most annoying things ever, both in real life and in programming. Watched YouTube videos, found ones w/ sponsors, and if it wasn’t detected by the local detection, fix it. Fixed bug where SponsorBlock-based detection was making the skipping not work. And I also added this lil popup window that lets you customize from where detections are, as well as a inwards time trim. The inwards time trim is nice because its customizable and lets you see just a little bit of the sponsor part, so you don’t miss any other content....
|
1792929168.862973
|
1793793168.862973
|
|
60439
|
notion study timer ! by @alyah | Stardance
|
alyah
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notion study timer ! by @alyah | Stardance
|
1793033499.7269943
|
1793638299.7269943
|
|
50616
|
notifications tracker by @Yahoo | Stardance
|
Yahoo
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notifications tracker by @Yahoo | Stardance
|
1793353976.874876
|
1793958776.874876
|
|
69930
|
nothing by @fedevxyz | Stardance
|
fedevxyz
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing by @fedevxyz | Stardance
|
1792957841.9919415
|
1793562641.9919415
|
|
65031
|
nothing by @adityamarndi127 | Stardance
|
adityamarndi127
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing by @adityamarndi127 | Stardance
|
1793083762.880809
|
1793688562.880809
|
|
65032
|
nothing by @adityamarndi127 | Stardance
|
adityamarndi127
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing by @adityamarndi127 | Stardance
|
1793083764.9542794
|
1793688564.9542794
|
|
45558
|
nothing by @abdurrafay490ji | Stardance
|
abdurrafay490ji
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing by @abdurrafay490ji | Stardance
|
1792911076.0614595
|
1793775076.0614595
|
|
28539
|
nothing by @Zaloguj12 | Stardance
|
Zaloguj12
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing by @Zaloguj12 | Stardance
|
1792943350.3669658
|
1793807350.3669658
|
|
64421
|
nothing 2 by @asteroidpen | Stardance
|
asteroidpen
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nothing 2 by @asteroidpen | Stardance
|
1793062463.402946
|
1793667263.402946
|
|
6148
|
nothelp by @Ruben | Stardance
|
Ruben
|
1
|
1.0
|
1
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-10T09:40:50Z", "hours": 1.0, "multiplier": 1.64, "payout": 1, "blessing": "neutral", "text": "I made a cool bot for people who aren’t on the help team to add a disclaimer to a message.", "repo": "https://github.com/code2344/helpbot", "demo": "https://app.slack.com/client/E09V59WQY1E/C0B5WQKC0F8"}]...
|
[{"post_id": 6129, "ts": "2026 [{"post_id": 6129, "ts": "2026-06-10T09:38:09Z", "hours": 0.3356, "text": "fixed bot so it sends for the right button but then realised i broke rules in like 4 channels (dw theyre getting removed) also got a icon :)"}, {"post_id": 6106, "ts": "2026-06-10T08:35:10Z", "hours": 0.4453, "text": "Added more features and working on making it change the button name in different channels!"}]...
|
Title: nothelp by @Ruben | Stardance
Devlogs:
Add Title: nothelp by @Ruben | Stardance
Devlogs:
Added more features and working on making it change the button name in different channels!
fixed bot so it sends for the right button but then realised i broke rules in like 4 channels (dw theyre getting removed) also got a icon :)
Ships:
I made a cool bot for people who aren’t on the help team to add a disclaimer to a message....
|
1793220647.0047197
|
1793307047.0047197
|
|
10861
|
noth by @Ajay22 | Stardance
|
Ajay22
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noth by @Ajay22 | Stardance
|
1792914799.5867746
|
1793778799.5867746
|
|
13005
|
noth by @Ajay22 | Stardance
|
Ajay22
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noth by @Ajay22 | Stardance
|
1792925578.6847036
|
1793789578.6847036
|
|
69810
|
notgreg.space by @geg | Stardance
|
geg
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notgreg.space by @geg | Stardance
|
1792860482.080776
|
1793465282.080776
|
|
11219
|
notes by @redhulk2029 | Stardance
|
redhulk2029
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notes by @redhulk2029 | Stardance
|
1793400598.3512256
|
1794005398.3512256
|
|
49661
|
notepad for PwSN by @Vedant8411 | Stardance
|
Vedant8411
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notepad for PwSN by @Vedant8411 | Stardance
|
1793296593.317591
|
1793901393.317591
|
|
11251
|
notepad by @yashraj | Stardance
|
yashraj
|
0
|
1.0
|
0
|
[]
|
[{"post_id": 6838, "ts": "2026 [{"post_id": 6838, "ts": "2026-06-11T14:06:35Z", "hours": 1.0019, "text": "Notepad Studio is designed to make note-taking feel more creative and enjoyable rather than just another routine task. Instead of separating writing and drawing into different applications, it brings both together in one workspace, allowing users to switch effortlessly between typing notes and sketching ideas. The application features a clean and visually appealing interface inspired by a vintage notebook aesthetic, making it comfortable to use for long periods. Users can choose between Light and Dark themes, helping create a personalized working environment. One of its standout features is the integrated Doodle Mode , which offers a variety of drawing tools such as markers, brush pens, highlighters, chalk, spray paint, and erasers. Combined with customizable colors and brush sizes, it provides a natural and expressive drawing experience suitable for brainstorming, annotations, and creative work. For writing tasks, the built-in text editor includes useful productivity features such as line numbers, word and character counts, file management options, and keyboard shortcuts that make everyday note-taking faster and more efficient. What makes Notepad Studio particularly user-friendly is its intuitive layout. Tools are clearly organized, important functions are easy to access, and the learning curve is minimal even for first-time users. Whether someone wants to write notes, sketch concepts, or combine both in a single project, the application provides a smooth and seamless experience. Overall, Notepad Studio is a practical yet creative solution that turns ordinary note-taking into a more engaging and productive experience. I am currently working on more features and improvements , any suggestion and support will be appreciated . thankyou"}]...
|
Title: notepad by @yashraj | Stardance
Devlogs:
N Title: notepad by @yashraj | Stardance
Devlogs:
Notepad Studio is designed to make note-taking feel more creative and enjoyable rather than just another routine task. Instead of separating writing and drawing into different applications, it brings both together in one workspace, allowing users to switch effortlessly between typing notes and sketching ideas. The application features a clean and visually appealing interface inspired by a vintage notebook aesthetic, making it comfortable to use for long periods. Users can choose between Light and Dark themes, helping create a personalized working environment. One of its standout features is the integrated Doodle Mode , which offers a variety of drawing tools such as markers, brush pens, highlighters, chalk, spray paint, and erasers. Combined with customizable colors and brush sizes, it provides a natural and expressive drawing experience suitable for brainstorming, annotations, and creative work. For writing tasks, the built-in text editor includes useful productivity features such as line numbers, word and character counts, file management options, and keyboard shortcuts that make everyday note-taking faster and more efficient. What makes Notepad Studio particularly user-friendly is its intuitive layout. Tools are clearly organized, important functions are easy to access, and the learning curve is minimal even for first-time users. Whether someone wants to write notes, sketch concepts, or combine both in a single project, the application provides a smooth and seamless experience. Overall, Notepad Studio is a practical yet creative solution that turns ordinary note-taking into a more engaging and productive experience. I am currently working on more features and improvements , any suggestion and support will be appreciated . thankyou...
|
1792803256.6685817
|
1793408056.6685817
|
|
58432
|
notepad by @arthi | Stardance
|
arthi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notepad by @arthi | Stardance
|
1792752450.6358888
|
1793357250.6358888
|
|
33814
|
noteforge by @muhil | Stardance
|
muhil
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noteforge by @muhil | Stardance
|
1793386150.5295348
|
1793990950.5295348
|
|
70128
|
notebed by @ryderklh | Stardance
|
ryderklh
|
0
|
17.42
|
0
|
[]
|
[{"post_id": 82606, "ts": "202 [{"post_id": 82606, "ts": "2026-10-25T12:15:40Z", "hours": 2.1706, "text": "!!! snapshot you can resize it and press the shot btn to screenshot then the img will be put in the place where you take the screenshot"}, {"post_id": 82190, "ts": "2026-10-24T06:59:31Z", "hours": 4.1114, "text": "add dark mode 🌜🌜🌜🌜🌜 fix some problem with html policy also, a lot of initialization was done outside of init(). when i tried to move it inside, the whole thing blew up because other functions were directly accessing those variables i have been trying to fix that"}, {"post_id": 81279, "ts": "2026-10-20T16:16:43Z", "hours": 1.0322, "text": "i fixed the home page it should be able to be used now done [1], [2] roadmap [3] i think i should add some screenshot and introduction"}, {"post_id": 80989, "ts": "2026-10-19T15:06:58Z", "hours": 2.78, "text": "problems keep popping out i used to be using a <a href= \" javascript:(function() { const s=document.createElement('script'); s.src='http://127.0.0.1:5500/script/notepad.js'; document.body.appendChild(s); })(); \" > here </a> i need to change this, because i am going to develope this website into a github page the CSS i add by using appendChild(“”) is ruining the original webpage im gonna solve this by using shadow DOM bad bg and font color under darkmode done [2] roadmap [1], [3] 11 days left"}, {"post_id": 80680, "ts": "2026-10-18T13:58:26Z", "hours": 2.6094, "text": "add delete btn: delete all notes remove drag btn add a title where user can hold to drag add x y width height to local storage put css into the bookmarklet i decided to add more bookmarklets, making this project a collection of bookmarklet roadmap notepad (mostly done) screenshot taker svg sketch …"}, {"post_id": 80418, "ts": "2026-10-17T15:58:53Z", "hours": 4.7164, "text": "this is my first time make a bookmarklet i originally create this for Hacklet, a ysws about bookmarklets, but i prefer a 3d printing credit rather than a domain… what i made a demo website a note container: nav: drag btn opacity btn close btn note box box satisfying scroller bar automatically save to local storage"}]...
|
Title: notebed by @ryderklh | Stardance
Devlogs:
Title: notebed by @ryderklh | Stardance
Devlogs:
this is my first time make a bookmarklet i originally create this for Hacklet, a ysws about bookmarklets, but i prefer a 3d printing credit rather than a domain… what i made a demo website a note container: nav: drag btn opacity btn close btn note box box satisfying scroller bar automatically save to local storage
add delete btn: delete all notes remove drag btn add a title where user can hold to drag add x y width height to local storage put css into the bookmarklet i decided to add more bookmarklets, making this project a collection of bookmarklet roadmap notepad (mostly done) screenshot taker svg sketch …
problems keep popping out i used to be using a <a href= " javascript:(function() { const s=document.createElement('script'); s.src='http://127.0.0.1:5500/script/notepad.js'; document.body.appendChild(s); })(); " > here </a> i need to change this, because i am going to develope this website into a github page the CSS i add by using appendChild(“”) is ruining the original webpage im gonna solve this by using shadow DOM bad bg and font color under darkmode done [2] roadmap [1], [3] 11 days left
i fixed the home page it should be able to be used now done [1], [2] roadmap [3] i think i should add some screenshot and introduction
add dark mode 🌜🌜🌜🌜🌜 fix some problem with html policy also, a lot of initialization was done outside of init(). when i tried to move it inside, the whole thing blew up because other functions were directly accessing those variables i have been trying to fix that
!!! snapshot you can resize it and press the shot btn to screenshot then the img will be put in the place where you take the screenshot...
|
1792958086.432084
|
1793562886.432084
|
|
42214
|
note-mash by @marygoat | Stardance
|
marygoat
|
1
|
9.0
|
38
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-08-06T05:19:20Z", "hours": 9.0, "multiplier": 4.05, "payout": 38, "blessing": "neutral", "text": "NOTE MASH A simple rhythm game with two songs :) Songs: Water, by kontraa Upbeat Rock, by BombinMusic Keybinds: S D J K it was challenging figuring out how to script the songs and to have it align with the chart and have no timing issues, but i’m proud that i got that figured out and working, as well as having this project come together!", "repo": "https://github.com/awesomesauce4646/rhythm-game", "demo": "https://marygoat.itch.io/note-mash"}]...
|
[{"post_id": 41761, "ts": "202 [{"post_id": 41761, "ts": "2026-08-06T04:49:43Z", "hours": 0.7417, "text": "ship???? i think im ready to ship! the game is functional, and i have changed the bgs (again) of the scenes. end screen is implemented, scoring system… it might not be the most insane rhythm game ever, but for a first time trying to make a rhythm game, i think its solid!"}, {"post_id": 41690, "ts": "2026-08-06T02:07:21Z", "hours": 0.4258, "text": "song delayed bug fix FOR REAL okay so when i thought i fixed the song delay bug earlier with the click to start feature, it did NOT!! actually fix it… but this time i tested it on itch.io and now it WORKS :D i had to change the song type from mp3 to ogg and change how the notes tracked time. now it works, huzzah!"}, {"post_id": 41629, "ts": "2026-08-05T23:14:14Z", "hours": 1.8736, "text": "end screen! made a song end screen, which then brings you back to song selection after a few seconds. i have also changed the background of the song selection, gave the play button a design, and changed up some fonts during the song. im not sure how to feel about the backgrounds, but we’re getting somewhere! :)"}, {"post_id": 40519, "ts": "2026-08-04T03:19:47Z", "hours": 0.4992, "text": "click to start song! so i pushed my code to itch.io, and oh no! the song wasn’t synced up! i didn’t take loading into account, so the song would start delayed but the chart notes would come down before it, caused it to be out of sync. with some searching up, i decided on letting the user click to start whenever they were ready and loaded to play! :)"}, {"post_id": 39879, "ts": "2026-08-03T04:46:16Z", "hours": 1.1617, "text": "note mash! gave my rhythm game a title, and added one new song called upbeat rock. i think im almost done with this project, itll be a pretty simple game since idk if i really want to put so much effort into this project, but we will see!"}, {"post_id": 39311, "ts": "2026-08-02T06:30:25Z", "hours": 1.2681, "text": "song selection, new song! made a song selection scene, and (poorly) charted another song! this will be replacing the other song, since this one is copyright FREE! the chart right now its a bit off, but not THAT off as shown in the video, idk why the music is so delayed </3 regardless, i will have to tweak the chart a bit, but im glad that i have a proper menu -> selection -> song format going on!"}, {"post_id": 39217, "ts": "2026-08-02T01:26:18Z", "hours": 0.9825, "text": "chart! got a chart going on, with the help of claude helping me make a charting system, where its basically just a function that records my inputs and outputs it into the output so that i can put these timings into my note array. i still need to edit it, but it is a great start! got some note skin on cause the rectangles annoyed me lol. this seems to be going great so far, and its been fun working on this! i also decided to make it 4 lanes instead of 6 because i think a lot more people play 4 key than 6 key, but maybe ill add different modes in the future :)"}, {"post_id": 38013, "ts": "2026-07-31T04:37:38Z", "hours": 2.5417, "text": "rhythm game! wanted to try to make a rhythm game, since i like those a lot lol. i followed a guide that got me this working rhythm game with drawn lines through code, but ill probably change that later and customize it more i think its a nice start, but im not sure when ill keep working on this since i wanna work on the webos mission, but i do want to come back sometime!"}]...
|
Title: note-mash by @marygoat | Stardance
Devlogs Title: note-mash by @marygoat | Stardance
Devlogs:
rhythm game! wanted to try to make a rhythm game, since i like those a lot lol. i followed a guide that got me this working rhythm game with drawn lines through code, but ill probably change that later and customize it more i think its a nice start, but im not sure when ill keep working on this since i wanna work on the webos mission, but i do want to come back sometime!
chart! got a chart going on, with the help of claude helping me make a charting system, where its basically just a function that records my inputs and outputs it into the output so that i can put these timings into my note array. i still need to edit it, but it is a great start! got some note skin on cause the rectangles annoyed me lol. this seems to be going great so far, and its been fun working on this! i also decided to make it 4 lanes instead of 6 because i think a lot more people play 4 key than 6 key, but maybe ill add different modes in the future :)
song selection, new song! made a song selection scene, and (poorly) charted another song! this will be replacing the other song, since this one is copyright FREE! the chart right now its a bit off, but not THAT off as shown in the video, idk why the music is so delayed </3 regardless, i will have to tweak the chart a bit, but im glad that i have a proper menu -> selection -> song format going on!
note mash! gave my rhythm game a title, and added one new song called upbeat rock. i think im almost done with this project, itll be a pretty simple game since idk if i really want to put so much effort into this project, but we will see!
click to start song! so i pushed my code to itch.io, and oh no! the song wasn’t synced up! i didn’t take loading into account, so the song would start delayed but the chart notes would come down before it, caused it to be out of sync. with some searching up, i decided on letting the user click to start whenever they were ready and loaded to play! :)
end screen! made a song end screen, which then brings you back to song selection after a few seconds. i have also changed the background of the song selection, gave the play button a design, and changed up some fonts during the song. im not sure how to feel about the backgrounds, but we’re getting somewhere! :)
song delayed bug fix FOR REAL okay so when i thought i fixed the song delay bug earlier with the click to start feature, it did NOT!! actually fix it… but this time i tested it on itch.io and now it WORKS :D i had to change the song type from mp3 to ogg and change how the notes tracked time. now it works, huzzah!
ship???? i think im ready to ship! the game is functional, and i have changed the bgs (again) of the scenes. end screen is implemented, scoring system… it might not be the most insane rhythm game ever, but for a first time trying to make a rhythm game, i think its solid!
Ships:
NOTE MASH A simple rhythm game with two songs :) Songs: Water, by kontraa Upbeat Rock, by BombinMusic Keybinds: S D J K it was challenging figuring out how to script the songs and to have it align with the chart and have no timing issues, but i’m proud that i got that figured out and working, as well as having this project come together!...
|
1793285387.728271
|
1793371787.728271
|
|
9726
|
note app by @kosteczkami | Stardance
|
kosteczkami
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: note app by @kosteczkami | Stardance
|
1792770545.4980273
|
1793375345.4980273
|
|
25858
|
notarocket by @pikiller219 | Stardance
|
pikiller219
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notarocket by @pikiller219 | Stardance
|
1793195596.7030742
|
1793800396.7030742
|
|
25871
|
notanotherrocket by @numitz_official | Stardance
|
numitz_official
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notanotherrocket by @numitz_official | Star Title: notanotherrocket by @numitz_official | Stardance...
|
1792702292.2050734
|
1793307092.2050734
|
|
956
|
not-so-scary-game by @hiral | Stardance
|
hiral
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: not-so-scary-game by @hiral | Stardance
|
1793134143.6836095
|
1793738943.6836095
|
|
48288
|
not slacking bot by @kai_lmao | Stardance
|
kai_lmao
|
1
|
0.0
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-08-16T18:31:54Z", "hours": 0.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "i made a slack bot using the guide. even though there was a guide, being new to vs coding made it very difficult to understand what was going on, though my interest in this made me push though to the end. i managed to get everything working by taking help using ai to fix errors and asking people in hack club to help me out, and in the end seeing my bot in action made all the hard work worth it! check out my project by going to the bot channel and typing /kaimans to see all the available commands.", "repo": "https://github.com/KaiTheGreat-123/slack-bot", "demo": "https://hackclub.enterprise.slack.com/archives/C0P5NE354"}]...
|
[{"post_id": 48372, "ts": "202 [{"post_id": 48372, "ts": "2026-08-16T18:08:49Z", "hours": 0.2981, "text": "finally made my very first slack bot! took a while to figure out issues with SSH and understanding what everything means but it works in the end! it gives catfacts a funny joke and pings, going to add more function to it later using the free apis."}]...
|
Title: not slacking bot by @kai_lmao | Stardance
Title: not slacking bot by @kai_lmao | Stardance
Devlogs:
finally made my very first slack bot! took a while to figure out issues with SSH and understanding what everything means but it works in the end! it gives catfacts a funny joke and pings, going to add more function to it later using the free apis.
Ships:
i made a slack bot using the guide. even though there was a guide, being new to vs coding made it very difficult to understand what was going on, though my interest in this made me push though to the end. i managed to get everything working by taking help using ai to fix errors and asking people in hack club to help me out, and in the end seeing my bot in action made all the hard work worth it! check out my project by going to the bot channel and typing /kaimans to see all the available commands....
|
1793332336.7688682
|
1793418736.7688682
|
|
29300
|
not another web based flight sim by @Shiven | Star not another web based flight sim by @Shiven | Stardance...
|
Shiven
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: not another web based flight sim by @Shiven Title: not another web based flight sim by @Shiven | Stardance...
|
1792928989.1687129
|
1793792989.1687129
|
|
45910
|
not a slacking off bot by @ish | Stardance
|
ish
|
0
|
0.42
|
0
|
[]
|
[{"post_id": 44503, "ts": "202 [{"post_id": 44503, "ts": "2026-08-10T09:45:24Z", "hours": 0.4183, "text": "Completed all the code for my bot in VS code. I have also tested the bot running localy and pleased to say it works. Going to push to Github soon and then run it 24/7"}]...
|
Title: not a slacking off bot by @ish | Stardance
Title: not a slacking off bot by @ish | Stardance
Devlogs:
Completed all the code for my bot in VS code. I have also tested the bot running localy and pleased to say it works. Going to push to Github soon and then run it 24/7...
|
1793361131.8706987
|
1793965931.8706987
|
|
55607
|
not a mini cyberdeck by @TirthP | Stardance
|
TirthP
|
0
|
4.43
|
0
|
[]
|
[{"post_id": 63324, "ts": "202 [{"post_id": 63324, "ts": "2026-09-07T02:44:34Z", "hours": 2.4833, "text": "I decided that if I was going to put in time and money to make a subpar cyberdeck, i might as well make a better one. I didn’t have a Raspberry Pi that i wanted to use for the project, so i decided to salvage this old 4k TV box that already runs Android. I booted Armbian, a linux distro, on it, and that’s working. Now the next step is to make a custom os and GUI for it."}, {"post_id": 61945, "ts": "2026-09-05T03:54:55Z", "hours": 1.6214, "text": "Installing os and custom UI (random image of tft screen imma use)"}, {"post_id": 56899, "ts": "2026-08-28T22:06:00Z", "hours": 0.3281, "text": "I just got some new parts in and wanted to prep them for breadboard testing by soldering the headers on."}]...
|
Title: not a mini cyberdeck by @TirthP | Stardance Title: not a mini cyberdeck by @TirthP | Stardance
Devlogs:
I just got some new parts in and wanted to prep them for breadboard testing by soldering the headers on.
Installing os and custom UI (random image of tft screen imma use)
I decided that if I was going to put in time and money to make a subpar cyberdeck, i might as well make a better one. I didn’t have a Raspberry Pi that i wanted to use for the project, so i decided to salvage this old 4k TV box that already runs Android. I booted Armbian, a linux distro, on it, and that’s working. Now the next step is to make a custom os and GUI for it....
|
1793170278.521538
|
1793775078.521538
|
|
19029
|
nosrep's ender 3 printhead by @nosrep | Starda nosrep's ender 3 printhead by @nosrep | Stardance...
|
nosrep
|
1
|
16.0
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-09-12T06:04:06Z", "hours": 16.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "this is my ender 3 printhead! the printhead is the part that heats up and extrudes the plastic with all the accessories that entails. i originally decided to make this when i randomly came into a direct drive extruder upgrade and a bltouch. i wasn’t satisfied with the existing designs to mount the two to the ender 3 (and i thought it would be fun to make my own), so i did! it’s got a biqu h2 v2s direct extruder, two gdstime 5015 blower fans for part cooling, and a bltouch for bed leveling. printing is now much faster, more precise, and leveling isn’t as much of a pain. the picture below and the video demo is the result of the pin support challenge from fullcontrol.xyz, very nice if i do say so myself (P.S. i brought this to outpost! i was the guy with the neck printer, iykyk.)", "repo": "https://github.com/Osrepnay/h2-v2s-coolhead", "demo": ""}]...
|
[{"post_id": 25998, "ts": "202 [{"post_id": 25998, "ts": "2026-07-10T15:32:06Z", "hours": 0.35, "text": "I made some duct modifications and now cooling seems to be much better. I think the new duct is choking the airflow a bit too much, but it’s more focused and can actually reach the spot right under the nozzle (which the old one seemed to struggle with?). I also did a LOT of testing, didn’t track most of it. Probably could benefit from a little more tuning, but we can do the pin support sphere on fullcontrol.xyz now! fixed some of the lingering issues, like the bltouch interfering with the duct and the bltouch interfering with the endstop (it’s always the bltouch…). we should be done now"}, {"post_id": 25354, "ts": "2026-07-09T16:20:41Z", "hours": 1.5556, "text": "it has been built! it is so loud! I finished designing the ducting and finished printing out everything, immediately a couple problems: ducts bump into bltouch (this was also in the cad but i didn’t notice) and the ducts are really flimsy. The ducts themselves are fine but the front plate is too thin to keep it in place properly. They work but it’s kinda sketchy. To fix the bltouch thing I just melted the ducts with my soldering iron, already remodeled a fixed version but have yet to print. The extruder seems to be not tuned very well. I set the manufacturer-recommended esteps, but it could be off. The cooling also seems to be sketchy? I can feel an insane amount of airflow but i don’t know if it’s going to the part yet. It aims a little low and I reprinted a bridging test I made earlier and the results seem to be worse. I also need to do some fixes later if i want to use this long-term. I couldn’t make a new extruder cable because my crimping tool couldn’t handle jst-ph, so i’m gonna have to deal with the stock extruder cable which severely limits the amount of vertical travel I can handle."}, {"post_id": 24836, "ts": "2026-07-08T17:25:42Z", "hours": 4.0925, "text": "i think i finally finished the ducts… these were nightmarish to make. onshape conveniently doesn’t have 3d sketches, so I did a horribly janky system involving planes and a routing curve. The path the duct had to take ended up being kinda strange, so the loft would constantly crash out because the profiles turned too sharply. i did eventually get the loft to cooperate, and the duct looks okay? it’s still very lumpy, but it should transition relatively smoothly, which is what’s important for airflow. i’ve also started printing the parts now. as i’m typing this, the main mount is finished and the fan mount is almost done. after that i should theoretically be good to assemble once i print the ducts (this is the video i used for duct design principles: https://www.youtube.com/watch?v=YijwkQCOBEA )"}, {"post_id": 12713, "ts": "2026-06-20T19:22:19Z", "hours": 1.2339, "text": "made ducting setup and fine tuned fan mounts actual duct geometry still gonna need a lot of work and maybe prototypes though"}, {"post_id": 12346, "ts": "2026-06-20T04:22:56Z", "hours": 2.7828, "text": "got the bltouch probing after much pain and suffering. needed to make new wires for this, duponts crimped okay but the crimper i borrowed was too wide to crimp the jst-xh properly. did it horribly and it seems sturdyish for now but it is incredibly sketchy and probably a fire hazard (i would be more worried if the bltouch drew more current). the plan was originally to remake the extruder wire, but after this i’m probably gonna have to hold off until i can get a proper crimper"}, {"post_id": 12046, "ts": "2026-06-19T17:25:26Z", "hours": 0.7667, "text": "reverted bltouch position. blower on the side looked too dumb so they’re both going on the front now. Blower mount still needs some refinement but should be basically done, then need ducts"}, {"post_id": 11778, "ts": "2026-06-19T05:09:01Z", "hours": 1.0978, "text": "switched out the bltouch mount position for the blower. struggled with making sane supports, still need to fix that"}, {"post_id": 11705, "ts": "2026-06-19T02:08:31Z", "hours": 0.7425, "text": "did some heat break testing. wanted to see if the casing of the hotend would get hot so i wired up the thermistor+heating element onto the board. waited a few minutes with a cheap fan i had pointed at the heat sink and it didn’t seem to get very hot so that’s a win for the future 3d printed mount. also i soldered the header to and wired up the accelerometer"}, {"post_id": 10347, "ts": "2026-06-17T00:59:54Z", "hours": 0.7556, "text": "mounted the bltouch. it kinda occludes the hotend fan but there shouuulllldd be enough space to not choke it up too bad, assuming it’s not total garbage (doubtful) tried to find a good part cooling fan position too and they’re all strange looking"}, {"post_id": 10232, "ts": "2026-06-16T21:15:35Z", "hours": 1.0567, "text": "got models for bltouch and 5015 fans surprisingly annoying, neither have official models and one model i found online for the bltouch was weird (holes that were supposed to be 18mm were like 17.998mm) and so i immediately gave up and made my own. it looks really bad but it should be usable dimensionally tried a bunch of alternatives for the 5015 fan. tried an alternative manufacturer but it differed too much from the other two community models (which were extremely similar to each other), so i just picked the more popular one. Couldn’t really model this one myself because I don’t have calipers to measure the dimensions and don’t have the fans yet to begin with"}, {"post_id": 9737, "ts": "2026-06-16T05:05:24Z", "hours": 1.165, "text": "did more work on the mount (accidentally forgot to start recording so there’s like an hour of work not listed here) the extruder part is done. there’s still some weirdness in the cad that I should probably clean but i’m also really lazy still need to make part for part cooling fans and bltouch timelapse: https://lapse.hackclub.com/timelapse/ZeQnBYR1oswD"}, {"post_id": 9601, "ts": "2026-06-16T00:10:25Z", "hours": 0.5639, "text": "biqu/bigtreetech does not have cad models for the extruder, but someone on printables made a very accurate one that i’m pulling for measurements. Confirmed it with the drawings that were in the “manual” for the h2 v2s"}]...
|
Title: nosrep's ender 3 printhead by @nosrep | Title: nosrep's ender 3 printhead by @nosrep | Stardance
Devlogs:
biqu/bigtreetech does not have cad models for the extruder, but someone on printables made a very accurate one that i’m pulling for measurements. Confirmed it with the drawings that were in the “manual” for the h2 v2s
did more work on the mount (accidentally forgot to start recording so there’s like an hour of work not listed here) the extruder part is done. there’s still some weirdness in the cad that I should probably clean but i’m also really lazy still need to make part for part cooling fans and bltouch timelapse: https://lapse.hackclub.com/timelapse/ZeQnBYR1oswD
got models for bltouch and 5015 fans surprisingly annoying, neither have official models and one model i found online for the bltouch was weird (holes that were supposed to be 18mm were like 17.998mm) and so i immediately gave up and made my own. it looks really bad but it should be usable dimensionally tried a bunch of alternatives for the 5015 fan. tried an alternative manufacturer but it differed too much from the other two community models (which were extremely similar to each other), so i just picked the more popular one. Couldn’t really model this one myself because I don’t have calipers to measure the dimensions and don’t have the fans yet to begin with
mounted the bltouch. it kinda occludes the hotend fan but there shouuulllldd be enough space to not choke it up too bad, assuming it’s not total garbage (doubtful) tried to find a good part cooling fan position too and they’re all strange looking
did some heat break testing. wanted to see if the casing of the hotend would get hot so i wired up the thermistor+heating element onto the board. waited a few minutes with a cheap fan i had pointed at the heat sink and it didn’t seem to get very hot so that’s a win for the future 3d printed mount. also i soldered the header to and wired up the accelerometer
switched out the bltouch mount position for the blower. struggled with making sane supports, still need to fix that
reverted bltouch position. blower on the side looked too dumb so they’re both going on the front now. Blower mount still needs some refinement but should be basically done, then need ducts
got the bltouch probing after much pain and suffering. needed to make new wires for this, duponts crimped okay but the crimper i borrowed was too wide to crimp the jst-xh properly. did it horribly and it seems sturdyish for now but it is incredibly sketchy and probably a fire hazard (i would be more worried if the bltouch drew more current). the plan was originally to remake the extruder wire, but after this i’m probably gonna have to hold off until i can get a proper crimper
made ducting setup and fine tuned fan mounts actual duct geometry still gonna need a lot of work and maybe prototypes though
i think i finally finished the ducts… these were nightmarish to make. onshape conveniently doesn’t have 3d sketches, so I did a horribly janky system involving planes and a routing curve. The path the duct had to take ended up being kinda strange, so the loft would constantly crash out because the profiles turned too sharply. i did eventually get the loft to cooperate, and the duct looks okay? it’s still very lumpy, but it should transition relatively smoothly, which is what’s important for airflow. i’ve also started printing the parts now. as i’m typing this, the main mount is finished and the fan mount is almost done. after that i should theoretically be good to assemble once i print the ducts (this is the video i used for duct design principles: https://www.youtube.com/watch?v=YijwkQCOBEA )
it has been built! it is so loud! I finished designing the ducting and finished printing out everything, immediately a couple problems: ducts bump into bltouch (this was also in the cad but i didn’t notice) and the ducts are really flimsy. The ducts themselves are fine but the front plate is too thin to keep it in place properly. They work but it’s kinda sketchy. To fix the bltouch thing I just melted the ducts with my soldering iron, already remodeled a fixed version but have yet to print. The extruder seems to be not tuned very well. I set the manufacturer-recommended esteps, but it could be off. The cooling also seems to be sketchy? I can feel an insane amount of airflow but i don’t know if it’s going to the part yet. It aims a little low and I reprinted a bridging test I made earlier and the results seem to be worse. I also need to do some fixes later if i want to use this long-term. I couldn’t make a new extruder cable because my crimping tool couldn’t handle jst-ph, so i’m gonna have to deal with the stock extruder cable which severely limits the amount of vertical travel I can handle.
I made some duct modifications and now cooling seems to be much better. I think the new duct is choking the airflow a bit too much, but it’s more focused and can actually reach the spot right under the nozzle (which the old one seemed to struggle with?). I also did a LOT of testing, didn’t track most of it. Probably could benefit from a little more tuning, but we can do the pin support sphere on fullcontrol.xyz now! fixed some of the lingering issues, like the bltouch interfering with the duct and the bltouch interfering with the endstop (it’s always the bltouch…). we should be done now
Ships:
this is my ender 3 printhead! the printhead is the part that heats up and extrudes the plastic with all the accessories that entails. i originally decided to make this when i randomly came into a direct drive extruder upgrade and a bltouch. i wasn’t satisfied with the existing designs to mount the two to the ender 3 (and i thought it would be fun to make my own), so i did! it’s got a biqu h2 v2s direct extruder, two gdstime 5015 blower fans for part cooling, and a bltouch for bed leveling. printing is now much faster, more precise, and leveling isn’t as much of a pain. the picture below and the video demo is the result of the pin support challenge from fullcontrol.xyz, very nice if i do say so myself (P.S. i brought this to outpost! i was the guy with the neck printer, iykyk.)...
|
1793350085.1387174
|
1793436485.1387174
|
|
56068
|
nootab by @willexists | Stardance
|
willexists
|
1
|
2.0
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-08-30T21:29:10Z", "hours": 2.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "this is the silliest noo-est tab in the face of the world! it has the magical things known as features weather cool stuff :) will", "repo": "https://github.com/ooowillexistsooo/nootab", "demo": "https://nootab.willexists.space"}]...
|
[{"post_id": 58456, "ts": "202 [{"post_id": 58456, "ts": "2026-08-30T21:27:15Z", "hours": 0.2858, "text": "fin i finished im so cutesy~!"}, {"post_id": 58409, "ts": "2026-08-30T20:24:40Z", "hours": 0.2967, "text": "i added a weather widget thing imma go read me now it actually workes"}, {"post_id": 58386, "ts": "2026-08-30T19:53:52Z", "hours": 0.5603, "text": "added a mac background and made it look more mac-y with a translucent background woah i’m using the ~fancy ~ words today it took me way too much time to learn how to make that not strikeout…"}, {"post_id": 57824, "ts": "2026-08-30T03:58:21Z", "hours": 0.4733, "text": "added a dock o.o"}, {"post_id": 57804, "ts": "2026-08-30T03:15:16Z", "hours": 0.755, "text": "i did the thing its a thing woa"}]...
|
Title: nootab by @willexists | Stardance
Devlogs: Title: nootab by @willexists | Stardance
Devlogs:
i did the thing its a thing woa
added a dock o.o
added a mac background and made it look more mac-y with a translucent background woah i’m using the ~fancy ~ words today it took me way too much time to learn how to make that not strikeout…
i added a weather widget thing imma go read me now it actually workes
fin i finished im so cutesy~!
Ships:
this is the silliest noo-est tab in the face of the world! it has the magical things known as features weather cool stuff :) will...
|
1793278415.0520415
|
1793364815.0520415
|
|
55620
|
nootab by @willexists | Stardance
|
willexists
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nootab by @willexists | Stardance
|
1792918240.5285478
|
1793782240.5285478
|
|
41841
|
noobclaw by @claw234 | Stardance
|
claw234
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noobclaw by @claw234 | Stardance
|
1793148640.6921604
|
1793753440.6921604
|
|
59767
|
noob by @Harrisbinoj | Stardance
|
Harrisbinoj
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noob by @Harrisbinoj | Stardance
|
1793029878.5740292
|
1793634678.5740292
|
|
54680
|
noko by @Johannesafi | Stardance
|
Johannesafi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noko by @Johannesafi | Stardance
|
1792799503.6351075
|
1793404303.6351075
|
|
58511
|
nokiaripoff by @parthmar97 | Stardance
|
parthmar97
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nokiaripoff by @parthmar97 | Stardance
|
1792932886.3994222
|
1793796886.3994222
|
|
58512
|
nokiaripoff by @parthmar97 | Stardance
|
parthmar97
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nokiaripoff by @parthmar97 | Stardance
|
1792932887.2161143
|
1793796887.2161143
|
|
58514
|
nokiaripoff by @parthmar97 | Stardance
|
parthmar97
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nokiaripoff by @parthmar97 | Stardance
|
1792932888.072139
|
1793796888.072139
|
|
66346
|
noel personal-website by @noelgarcians | Stardance
|
noelgarcians
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noel personal-website by @noelgarcians | St Title: noel personal-website by @noelgarcians | Stardance...
|
1793098232.3975627
|
1793703032.3975627
|
|
70328
|
nodupe by @deadbeef404 | Stardance
|
deadbeef404
|
0
|
0.41
|
0
|
[]
|
[{"post_id": 80664, "ts": "202 [{"post_id": 80664, "ts": "2026-10-18T13:12:20Z", "hours": 0.4122, "text": "I have completed the extension and it works perfectly. Now I will just test it to find if there are any problems or any thing I should add to this to make it better."}]...
|
Title: nodupe by @deadbeef404 | Stardance
Devlogs Title: nodupe by @deadbeef404 | Stardance
Devlogs:
I have completed the extension and it works perfectly. Now I will just test it to find if there are any problems or any thing I should add to this to make it better....
|
1792993981.1530242
|
1793598781.1530242
|
|
69500
|
nodeseed by @anshpatel9720 | Stardance
|
anshpatel9720
|
1
|
7.0
|
0
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-13T13:14:44Z", "hours": 7.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "I make a engineer calculator that’s calculate everything it’s hard but I completed in seven hours ,good.", "repo": "https://github.com/anshpatel9720-cmd/nodeseed", "demo": "https://anshpatel9720-cmd.github.io/nodeseed/"}]...
|
[{"post_id": 79302, "ts": "202 [{"post_id": 79302, "ts": "2026-10-13T13:10:22Z", "hours": 7.2858, "text": "something is working now"}]...
|
Title: nodeseed by @anshpatel9720 | Stardance
Dev Title: nodeseed by @anshpatel9720 | Stardance
Devlogs:
something is working now
Ships:
I make a engineer calculator that’s calculate everything it’s hard but I completed in seven hours ,good....
|
1793001139.9802473
|
1793865139.9802473
|
|
53552
|
noctilume by @jamallyemin | Stardance
|
jamallyemin
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noctilume by @jamallyemin | Stardance
|
1792752712.069995
|
1793357512.069995
|
|
20627
|
noctOS by @Kaorii | Stardance
|
Kaorii
|
1
|
1.0
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-18T07:16:31Z", "hours": 1.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "An OS that has the iOS aesthetics and works inside the web browser!", "repo": "https://github.com/kaorii-ako/noctOS", "demo": "https://noct-os.vercel.app/os"}]...
|
[{"post_id": 11146, "ts": "202 [{"post_id": 11146, "ts": "2026-06-18T07:14:45Z", "hours": 0.34, "text": "v3 and final. https://noct-os.vercel.app/os made safari work (kinda) and improved terminal and main vibes"}, {"post_id": 11127, "ts": "2026-06-18T06:25:20Z", "hours": 0.2758, "text": "v2 with bug fixes and stuff added"}, {"post_id": 10618, "ts": "2026-06-17T13:46:21Z", "hours": 0.3408, "text": "This is the first variation of the OS"}]...
|
Title: noctOS by @Kaorii | Stardance
Devlogs:
Thi Title: noctOS by @Kaorii | Stardance
Devlogs:
This is the first variation of the OS
v2 with bug fixes and stuff added
v3 and final. https://noct-os.vercel.app/os made safari work (kinda) and improved terminal and main vibes
Ships:
An OS that has the iOS aesthetics and works inside the web browser!...
|
1793224379.4418485
|
1793310779.4418485
|
|
38880
|
noar style site by @Ling | Stardance
|
Ling
|
1
|
3.0
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-07-24T19:16:09Z", "hours": 3.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "I made a noir syle site with links images and music the most dificult part was the html part for the music player by far", "repo": "https://github.com/Miyamoto-web/Noir-Site", "demo": "https://miyamoto-web.github.io/Noir-Site/"}]...
|
[{"post_id": 34086, "ts": "202 [{"post_id": 34086, "ts": "2026-07-24T15:39:32Z", "hours": 0.5228, "text": "it’s done!"}, {"post_id": 34051, "ts": "2026-07-24T14:35:52Z", "hours": 0.8942, "text": "learning css and trying to link music in the site"}, {"post_id": 33851, "ts": "2026-07-24T03:01:04Z", "hours": 0.2972, "text": "more images about me section"}, {"post_id": 33787, "ts": "2026-07-23T23:59:17Z", "hours": 0.3325, "text": "working image"}, {"post_id": 33780, "ts": "2026-07-23T23:31:28Z", "hours": 0.5478, "text": "Noir site demo + working link + italic"}, {"post_id": 33753, "ts": "2026-07-23T22:21:55Z", "hours": 0.4042, "text": "getting started on my noar site"}]...
|
Title: noar style site by @Ling | Stardance
Devlo Title: noar style site by @Ling | Stardance
Devlogs:
getting started on my noar site
Noir site demo + working link + italic
working image
more images about me section
learning css and trying to link music in the site
it’s done!
Ships:
I made a noir syle site with links images and music the most dificult part was the html part for the music player by far...
|
1793328718.7379777
|
1793415118.7379777
|
|
70636
|
noahware by @noah_keeve | Stardance
|
noah_keeve
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: noahware by @noah_keeve | Stardance
|
1793173711.7547915
|
1793778511.7547915
|
|
6546
|
no_title by @core_cryptic_io | Stardance
|
core_cryptic_io
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: no_title by @core_cryptic_io | Stardance
|
1793303237.3635662
|
1793908037.3635662
|
|
39170
|
no-bs-input by @Rynqor | Stardance
|
Rynqor
|
0
|
1.69
|
0
|
[]
|
[{"post_id": 37649, "ts": "202 [{"post_id": 37649, "ts": "2026-07-30T15:16:50Z", "hours": 0.3072, "text": "Finally Step 1 is done. Devlog #2 The main controller mapper is working and picking values from the config file. Now I only need to make a GUI app for it to easily and reliably edit the values in the config file."}, {"post_id": 35802, "ts": "2026-07-27T13:53:21Z", "hours": 1.3831, "text": "Devlog #1 Today I decided to post a devlog randomly. I was still working on this earlier but I didn’t know what to post, like what to show. Btw this project is kinda small but helpful. I had already done this. You can see the file “virtualpad.c” in the screenshot But it only worked specifically for my controller only, it was graved into the code and it will be a hustle to change anything everytime for a new controller. This project is kind of a remaster so that everyone can easily set their own mappings easily. History of this project: It was 1st of June this year and my vacations were about to start. So I wanted to buy the Xbox Gamepass Ultimate so I can play on cloud cuz I don’t have a powerful enough device. (I wanted to play Doom 2016, Doom: The Dark Ages and Doom Eternal btw but Doom Eternal got hard to beat on a controller eventually for me). The Website only accepted Controller input for those specific games, I had one controller but it was not getting detected on the website. I tried many other things like custom Xbox drivers for my controller to work on the website but they just didn’t work as intended. So I just decided to make my own program written in C for this purpose. I made it but mappings were engraved into the code and it was hard to test and figure out for other users. That’s what I am trying to do. I am trying to make something which I required earlier so someone else doesn’t have to struggle again."}]...
|
Title: no-bs-input by @Rynqor | Stardance
Devlogs Title: no-bs-input by @Rynqor | Stardance
Devlogs:
Devlog #1 Today I decided to post a devlog randomly. I was still working on this earlier but I didn’t know what to post, like what to show. Btw this project is kinda small but helpful. I had already done this. You can see the file “virtualpad.c” in the screenshot But it only worked specifically for my controller only, it was graved into the code and it will be a hustle to change anything everytime for a new controller. This project is kind of a remaster so that everyone can easily set their own mappings easily. History of this project: It was 1st of June this year and my vacations were about to start. So I wanted to buy the Xbox Gamepass Ultimate so I can play on cloud cuz I don’t have a powerful enough device. (I wanted to play Doom 2016, Doom: The Dark Ages and Doom Eternal btw but Doom Eternal got hard to beat on a controller eventually for me). The Website only accepted Controller input for those specific games, I had one controller but it was not getting detected on the website. I tried many other things like custom Xbox drivers for my controller to work on the website but they just didn’t work as intended. So I just decided to make my own program written in C for this purpose. I made it but mappings were engraved into the code and it was hard to test and figure out for other users. That’s what I am trying to do. I am trying to make something which I required earlier so someone else doesn’t have to struggle again.
Finally Step 1 is done. Devlog #2 The main controller mapper is working and picking values from the config file. Now I only need to make a GUI app for it to easily and reliably edit the values in the config file....
|
1793188312.7260053
|
1793793112.7260053
|
|
44561
|
no name yet :( by @eeeeeeee | Stardance
|
eeeeeeee
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: no name yet :( by @eeeeeeee | Stardance
|
1793282038.256828
|
1793886838.256828
|
|
44781
|
no idea by @queso | Stardance
|
queso
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: no idea by @queso | Stardance
|
1793296085.364251
|
1793900885.364251
|
|
32904
|
no idea by @fazliddin | Stardance
|
fazliddin
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: no idea by @fazliddin | Stardance
|
1792738488.391265
|
1793343288.391265
|
|
2860
|
nnj by @LeYohan | Stardance
|
LeYohan
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: nnj by @LeYohan | Stardance
|
1792929020.9839547
|
1793793020.9839547
|