|
2686
|
. by @zazzie | Stardance
|
zazzie
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: . by @zazzie | Stardance
|
1792889411.716442
|
1793753411.716442
|
|
2685
|
My first slack bot! by @TimBoBN | Stardance
|
TimBoBN
|
0
|
0.34
|
0
|
[]
|
[{"post_id": 840, "ts": "2026- [{"post_id": 840, "ts": "2026-06-02T15:09:52Z", "hours": 0.3367, "text": "Devlog — Slack Echo-Bot (Short report, 2026-06-02) Status: Minimal prototype created and prepared for local run. Goal: Simple Python echo bot that responds to messages and @-mentions via Socket Mode. What I did: Created and updated: Code: app.py — main logic using slack_bolt and SocketModeHandler. Dependencies: requirements.txt (slack_bolt, python-dotenv). Env example: .env.example (placeholders for SLACK_BOT_TOKEN and SLACK_APP_TOKEN). Docs: README.md updated with quickstart. Key design choices: Language: Python. Use Socket Mode to simplify local development without external HTTP endpoints. Echo behavior: handles message events (ignores bot subtypes) and app_mention."}]...
|
Title: My first slack bot! by @TimBoBN | Stardance Title: My first slack bot! by @TimBoBN | Stardance
Devlogs:
Devlog — Slack Echo-Bot (Short report, 2026-06-02) Status: Minimal prototype created and prepared for local run. Goal: Simple Python echo bot that responds to messages and @-mentions via Socket Mode. What I did: Created and updated: Code: app.py — main logic using slack_bolt and SocketModeHandler. Dependencies: requirements.txt (slack_bolt, python-dotenv). Env example: .env.example (placeholders for SLACK_BOT_TOKEN and SLACK_APP_TOKEN). Docs: README.md updated with quickstart. Key design choices: Language: Python. Use Socket Mode to simplify local development without external HTTP endpoints. Echo behavior: handles message events (ignores bot subtypes) and app_mention....
|
1793159384.9466789
|
1793764184.9466789
|
|
2684
|
My first slack bot! by @hirwapie | Stardance
|
hirwapie
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @hirwapie | Stardanc Title: My first slack bot! by @hirwapie | Stardance...
|
1793174076.6128075
|
1793778876.6128075
|
|
2683
|
My Passport Unlocker GUI by @lawrenceshi | Stardan My Passport Unlocker GUI by @lawrenceshi | Stardance...
|
lawrenceshi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My Passport Unlocker GUI by @lawrenceshi | Title: My Passport Unlocker GUI by @lawrenceshi | Stardance...
|
1792914765.7946336
|
1793778765.7946336
|
|
2682
|
My first slack bot! by @Banana_Bread | Stardance
|
Banana_Bread
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Banana_Bread | Star Title: My first slack bot! by @Banana_Bread | Stardance...
|
1793246168.7320366
|
1793850968.7320366
|
|
2681
|
Untitled project by @lukatrajanovski2 | Stardance
|
lukatrajanovski2
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @lukatrajanovski2 | Sta Title: Untitled project by @lukatrajanovski2 | Stardance...
|
1792734723.0353482
|
1793339523.0353482
|
|
2680
|
My awesome macropad! by @lukatrajanovski2 | Starda My awesome macropad! by @lukatrajanovski2 | Stardance...
|
lukatrajanovski2
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @lukatrajanovski2 | Title: My awesome macropad! by @lukatrajanovski2 | Stardance...
|
1793235254.4945226
|
1793840054.4945226
|
|
2679
|
My first slack bot! by @DanielP | Stardance
|
DanielP
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @DanielP | Stardance
|
1792637356.3248703
|
1793242156.3248703
|
|
2678
|
My awesome macropad! by @Banana_Bread | Stardance
|
Banana_Bread
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Banana_Bread | Sta Title: My awesome macropad! by @Banana_Bread | Stardance...
|
1793260379.027649
|
1793865179.027649
|
|
2677
|
Untitled by @carolineford960 | Stardance
|
carolineford960
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @carolineford960 | Stardance
|
1792792275.7984245
|
1793397075.7984245
|
|
2676
|
Build a room by @Hashi | Stardance
|
Hashi
|
0
|
2.24
|
0
|
[]
|
[{"post_id": 1244, "ts": "2026 [{"post_id": 1244, "ts": "2026-06-03T03:07:12Z", "hours": 0.5325, "text": "started working on the login page for the website: no results yet; and finished the first desk piece"}, {"post_id": 1217, "ts": "2026-06-03T02:23:07Z", "hours": 1.0311, "text": "started on my decors on blender; needs a lot of fixing done"}, {"post_id": 608, "ts": "2026-06-02T03:25:56Z", "hours": 0.3556, "text": "working on my second piece of furniture"}, {"post_id": 572, "ts": "2026-06-02T02:05:53Z", "hours": 0.3236, "text": "I made my first piece of furniture"}]...
|
Title: Build a room by @Hashi | Stardance
Devlogs Title: Build a room by @Hashi | Stardance
Devlogs:
I made my first piece of furniture
working on my second piece of furniture
started on my decors on blender; needs a lot of fixing done
started working on the login page for the website: no results yet; and finished the first desk piece...
|
1793281812.5786378
|
1793886612.5786378
|
|
2675
|
Mobile Drum set! by @alan_ti | Stardance
|
alan_ti
|
0
|
16.96
|
0
|
[]
|
[{"post_id": 17738, "ts": "202 [{"post_id": 17738, "ts": "2026-06-28T17:34:13Z", "hours": 8.1408, "text": "Added hihats , a kick drum pedal and did some major fixing"}, {"post_id": 11553, "ts": "2026-06-18T20:56:00Z", "hours": 1.1053, "text": "Made everything Square and started Bass drum Pedal"}, {"post_id": 10865, "ts": "2026-06-17T20:26:30Z", "hours": 1.09, "text": "Finished the kick and then descided to ditch the old shell"}, {"post_id": 10171, "ts": "2026-06-16T19:42:40Z", "hours": 6.6219, "text": "Bass Drum/ Main Body and Hihat Done :3"}]...
|
Title: Mobile Drum set! by @alan_ti | Stardance
D Title: Mobile Drum set! by @alan_ti | Stardance
Devlogs:
Bass Drum/ Main Body and Hihat Done :3
Finished the kick and then descided to ditch the old shell
Made everything Square and started Bass drum Pedal
Added hihats , a kick drum pedal and did some major fixing...
|
1792781410.1786542
|
1793386210.1786542
|
|
2674
|
Movie Recc. Engine by @armadillomike | Stardance
|
armadillomike
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Movie Recc. Engine by @armadillomike | Star Title: Movie Recc. Engine by @armadillomike | Stardance...
|
1792630057.3831732
|
1793234857.3831732
|
|
2673
|
My awesome macropad! by @Light10115 | Stardance
|
Light10115
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Light10115 | Stard Title: My awesome macropad! by @Light10115 | Stardance...
|
1792760014.8337924
|
1793364814.8337924
|
|
2672
|
My awesome macropad! by @mariammohamedsaid2010 | S My awesome macropad! by @mariammohamedsaid2010 | Stardance...
|
mariammohamedsaid2010
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @mariammohamedsaid2 Title: My awesome macropad! by @mariammohamedsaid2010 | Stardance...
|
1793274692.6762824
|
1793879492.6762824
|
|
2671
|
Minecraft Ai Bot by @Robby | Stardance
|
Robby
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Minecraft Ai Bot by @Robby | Stardance
|
1792766833.062895
|
1793371633.062895
|
|
2670
|
Star Sign Project Hub by @JM | Stardance
|
JM
|
1
|
6.0
|
39
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-07T22:18:42Z", "hours": 6.0, "multiplier": 6.2, "payout": 39, "blessing": "neutral", "text": "I made a project hub that stores all the projects I will make this summer into one website. Styling everything was the hardest part because it was hard to figure where everything was supposed to go to look nice.", "repo": "https://github.com/Not-JM/Star-Sign-Project-Hub", "demo": "https://star-sign-project-hub.vercel.app/"}]...
|
[{"post_id": 4559, "ts": "2026 [{"post_id": 4559, "ts": "2026-06-07T22:04:24Z", "hours": 3.3678, "text": "Devlog #3 I just published the entire project and added a quote section, created an about me section, created a template for all of the project pages for each individual project, and ran some polishes with design. This is the final product of the front page and I feel like it turned out great with everything looking clean and smooth. See you guys in the next Devlog and Project. I had so much fun creating this project hub and will start adding to it soon. Let me know if you have any suggestions!"}, {"post_id": 2988, "ts": "2026-06-05T22:19:52Z", "hours": 1.9583, "text": "Devlog #2 I made a banner and project page with links to each project page. (do not question why it says Star Space Project hub) I have an idea for an about me page with information about me the dev. In the projects page there it’s only some templates I will add more when I complete more projects. I decided for each project box it will have Project: _____ for each star sign, but including a separate title for the project. Each project box links to its own page with the link and description of each one. I am going to make a footer, add to the recent projects section in the home page, and complete the about me page. So in my next devlog I will be pushing and posting my project. See you guys in the next Devlog! Share any ideas or suggestions you have for this project if you want!"}, {"post_id": 2572, "ts": "2026-06-05T04:26:46Z", "hours": 0.9611, "text": "Devlog #1 I set up node and everything and now relearning how to create a website. I am planning to have sections laid out for the home page as well as links to each section. A summary of what this is going to be, it is going to be a site to put all my stuff projects in for this summer, a sort of portfolio of my work. The design looks a bit barren right now but I will work on the details after I section off everything. Let me know what you think about this idea and what I shall add to this homepage! I’m thinking of adding a footer, maybe another section, and creating an image for the banner"}]...
|
Title: Star Sign Project Hub by @JM | Stardance
D Title: Star Sign Project Hub by @JM | Stardance
Devlogs:
Devlog #1 I set up node and everything and now relearning how to create a website. I am planning to have sections laid out for the home page as well as links to each section. A summary of what this is going to be, it is going to be a site to put all my stuff projects in for this summer, a sort of portfolio of my work. The design looks a bit barren right now but I will work on the details after I section off everything. Let me know what you think about this idea and what I shall add to this homepage! I’m thinking of adding a footer, maybe another section, and creating an image for the banner
Devlog #2 I made a banner and project page with links to each project page. (do not question why it says Star Space Project hub) I have an idea for an about me page with information about me the dev. In the projects page there it’s only some templates I will add more when I complete more projects. I decided for each project box it will have Project: _____ for each star sign, but including a separate title for the project. Each project box links to its own page with the link and description of each one. I am going to make a footer, add to the recent projects section in the home page, and complete the about me page. So in my next devlog I will be pushing and posting my project. See you guys in the next Devlog! Share any ideas or suggestions you have for this project if you want!
Devlog #3 I just published the entire project and added a quote section, created an about me section, created a template for all of the project pages for each individual project, and ran some polishes with design. This is the final product of the front page and I feel like it turned out great with everything looking clean and smooth. See you guys in the next Devlog and Project. I had so much fun creating this project hub and will start adding to it soon. Let me know if you have any suggestions!
Ships:
I made a project hub that stores all the projects I will make this summer into one website. Styling everything was the hardest part because it was hard to figure where everything was supposed to go to look nice....
|
1793141423.5809536
|
1793227823.5809536
|
|
2669
|
Untitled project by @Deniz | Stardance
|
Deniz
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @Deniz | Stardance
|
1792648079.1470463
|
1793252879.1470463
|
|
2668
|
DevTrack by @Ishoula | Stardance
|
Ishoula
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: DevTrack by @Ishoula | Stardance
|
1792770805.8190923
|
1793375605.8190923
|
|
2667
|
My awesome macropad! by @Winter | Stardance
|
Winter
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Winter | Stardance
|
1792741919.0508704
|
1793346719.0508704
|
|
2666
|
My awesome macropad! by @Deniz | Stardance
|
Deniz
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Deniz | Stardance
|
1792785165.862209
|
1793649165.862209
|
|
2665
|
Password manager by @YaaniR17 | Stardance
|
YaaniR17
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Password manager by @YaaniR17 | Stardance
|
1793310670.560151
|
1793915470.560151
|
|
2664
|
Fidget toy (CAD-Shapr3D) by @ThePlaneGuy | Stardan Fidget toy (CAD-Shapr3D) by @ThePlaneGuy | Stardance...
|
ThePlaneGuy
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Fidget toy (CAD-Shapr3D) by @ThePlaneGuy | Title: Fidget toy (CAD-Shapr3D) by @ThePlaneGuy | Stardance...
|
1792633769.248687
|
1793238569.248687
|
|
2663
|
Bumblebee by @Sem_Acou | Stardance
|
Sem_Acou
|
0
|
7.84
|
0
|
[]
|
[{"post_id": 39134, "ts": "202 [{"post_id": 39134, "ts": "2026-08-01T21:00:27Z", "hours": 4.8667, "text": "Just some PCB work The past hours have been spent designing the avionics for these missions. Honestly, I am very much over-engineering this board , just so I can use it in future projects aswell. I am almost done with the microcontroller (RP2040), now I can move on to other components. These include an accelerometer, gyroscope, barometer, connectors for pyro charges… Imma hop back into my flow state (at least try😅), cyaaaa!"}, {"post_id": 12147, "ts": "2026-06-19T20:57:48Z", "hours": 2.25, "text": "Today I worked a little bit more on the rocket design and slightly changed it so i can use this airframe as the second stage for my next rocket (2 stage 1.2km rocket). I also picked parts for the flightcomputer and studied datasheets. Next up is the PCB schematic!"}, {"post_id": 10160, "ts": "2026-06-16T19:32:09Z", "hours": 0.7253, "text": "I have been working on this project before the timelaps function came out. And it mainly was simulation and design work, so not that much logging. I’m building the first of 2 model rockets in my current program. development rocket to prove i can launch one succesfully using avionics. I call this rocket ‘Bumblebee’ the proven technology on flight 2 will finally fly on a full 2 stage rocket to about 1.2km. And controll: second stage ignition, drogue chute deployment at apogee and main chute deployment at 200m. I call this rocket ‘Yeetimus Prime’ 😂 I’ve already designed and simulated rockets 1 and 3 in a program called ‘Open Rocket’. And made a 3d CAD model of Bumblebee(rocket of flight one)"}]...
|
Title: Bumblebee by @Sem_Acou | Stardance
Devlogs Title: Bumblebee by @Sem_Acou | Stardance
Devlogs:
I have been working on this project before the timelaps function came out. And it mainly was simulation and design work, so not that much logging. I’m building the first of 2 model rockets in my current program. development rocket to prove i can launch one succesfully using avionics. I call this rocket ‘Bumblebee’ the proven technology on flight 2 will finally fly on a full 2 stage rocket to about 1.2km. And controll: second stage ignition, drogue chute deployment at apogee and main chute deployment at 200m. I call this rocket ‘Yeetimus Prime’ 😂 I’ve already designed and simulated rockets 1 and 3 in a program called ‘Open Rocket’. And made a 3d CAD model of Bumblebee(rocket of flight one)
Today I worked a little bit more on the rocket design and slightly changed it so i can use this airframe as the second stage for my next rocket (2 stage 1.2km rocket). I also picked parts for the flightcomputer and studied datasheets. Next up is the PCB schematic!
Just some PCB work The past hours have been spent designing the avionics for these missions. Honestly, I am very much over-engineering this board , just so I can use it in future projects aswell. I am almost done with the microcontroller (RP2040), now I can move on to other components. These include an accelerometer, gyroscope, barometer, connectors for pyro charges… Imma hop back into my flow state (at least try😅), cyaaaa!...
|
1793159374.5475912
|
1793764174.5475912
|
|
2662
|
My first slack bot! by @AHAN_MIRZA | Stardance
|
AHAN_MIRZA
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @AHAN_MIRZA | Starda Title: My first slack bot! by @AHAN_MIRZA | Stardance...
|
1793213528.8778324
|
1793818328.8778324
|
|
2661
|
Untitled project by @fakhfakh_mohamed_aziz | Stard Untitled project by @fakhfakh_mohamed_aziz | Stardance...
|
fakhfakh_mohamed_aziz
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @fakhfakh_mohamed_aziz Title: Untitled project by @fakhfakh_mohamed_aziz | Stardance...
|
1793314350.8054216
|
1793919150.8054216
|
|
2660
|
My first slack bot! by @AnonymousLife | Stardance
|
AnonymousLife
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @AnonymousLife | Sta Title: My first slack bot! by @AnonymousLife | Stardance...
|
1793274698.3862693
|
1793879498.3862693
|
|
2659
|
Untitled project by @cami | Stardance
|
cami
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @cami | Stardance
|
1792662806.7273188
|
1793267606.7273188
|
|
2658
|
My awesome macropad! by @ | Stardance
|
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @ | Stardance
|
1792734675.1354592
|
1793339475.1354592
|
|
2657
|
My awesome macropad! by @Wanza | Stardance
|
Wanza
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Wanza | Stardance
|
1793210224.4306421
|
1793815024.4306421
|
|
2656
|
My awesome macropad! by @rarqum786 | Stardance
|
rarqum786
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @rarqum786 | Starda Title: My awesome macropad! by @rarqum786 | Stardance...
|
1792662473.6878052
|
1793267273.6878052
|
|
2655
|
Don't know by @azizaagamer | Stardance
|
azizaagamer
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Don't know by @azizaagamer | Stardance
|
1792630060.8043668
|
1793234860.8043668
|
|
2654
|
AgentPass by @ShawnT | Stardance
|
ShawnT
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: AgentPass by @ShawnT | Stardance
|
1793191684.1547287
|
1793796484.1547287
|
|
2653
|
EduConnect by @Adedamola | Stardance
|
Adedamola
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: EduConnect by @Adedamola | Stardance
|
1793134379.7679324
|
1793739179.7679324
|
|
2652
|
FrogPad by @FrogDude | Stardance
|
FrogDude
|
1
|
0.96
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-19T01:21:36Z", "hours": 0.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "FrogPad Devlog 06: Shipped! FrogPad is a 12-key macropad with audio control, arrow keys, and a delete button for me to smash as needed. It also has an OLED, which can display animations and (hopefully) playing audio, all packed into a fun frog-shaped case. Frogs are awesome. Keyboards are awesome. This is my combination.", "repo": "https://github.com/FrogDude7856/FrogPad", "demo": ""}]...
|
[{"post_id": 49290, "ts": "202 [{"post_id": 49290, "ts": "2026-08-18T00:40:22Z", "hours": 0.9589, "text": "FrogPad Devlog 07: we’re so back. (Please ignore any formatting issues, I am currently typing on my mobile device) MY KIT SHOWED UP! The past hour has been putting together parts, test fits, and overall design checks. I also had to sand some things because I accidentally made the port hole too small - hopefully that wound be an issue in the future… Next steps are to learn to sauder and then put stuff together for the case-off test, then install the case! (Image: my case, printed by the nice people over at #printing_legion)"}, {"post_id": 11373, "ts": "2026-06-18T16:42:32Z", "hours": 0.8497, "text": "FrogPad Devlog 005: Began work on firmware for keyboard; established key layout. – Swapped from numpad to sort of a themed quick commands pad (music control, delete key, etc) Discovered that OLEDs are probably the hardest part I could have chosen to include (what do you mean my two options are “probably doesn’t work with your OS” or “learn an entirely new coding language”) Began work on baby’s first GitHub Repo! Link should be accessible now, if not as soon as I ship. Next Steps: Setup QMK-Now Playing ( https://github.com/dob9601/qmk-nowplaying ) on board for OLED? Hopefully? I am not sure if it’ll work since I’m on Windows but worth a shot. (no I don’t know what this code stuff means, this is from my first test compiling)"}, {"post_id": 9642, "ts": "2026-06-16T01:36:37Z", "hours": 1.5094, "text": "FrogPad Devlog 004: FINALLY, MODELING Redid the PCB. Again. I got it down to 99.925 mm on the larger side, so now I’m in compliance! Still waiting on a sanity check but hopefully I am finally done with this after (checks notes) THREE HOURS??? Began modeling my case for this on OnShape. It’s frog shaped. I am nothing if not on brand. I only have the bottom case so far, and I’m aiming to finish the whole thing by the end of the week. Next steps: Finish case Code/modify code for firmware Write README"}, {"post_id": 8464, "ts": "2026-06-14T02:18:16Z", "hours": 1.6506, "text": "Frog Pad Devlog 003: AHHHHHHH So I had to redo the PCB. Three Times. It was easier than rearranging all the parts to reorder them, but it sure did take a lot of trial and error. I had multiple YouTube Tutorials open; I am sorry to whoever watches my Lapse clips because I made a lot of cuts trying to not count research time. Most of today was reorganizing my parts for wiring/copper-ing and trying to align all my parts. I was going to do edge cuts today but it’s 10 PM right now and I have to be up in 8 hours. But everything’s connected! Tomorrow is hopefully edge cuts and updating the silkscreen, then running a sanity check before I do this all over again with OnShape. 🐸🗒️!"}, {"post_id": 7658, "ts": "2026-06-12T20:02:43Z", "hours": 0.7131, "text": "FrogPad Devlog 002: PCB? what’s a PCB? assigned footprints to the components and added to the PCB builder in KiCad. Twice. I accidentally made my switches LEDs, got very confused by the three tutorials I was referencing, and then asked the nice people in #hackpad for help. Next Steps (this weekend hopefully): Copper wire (?) PCB Edge cuts Screen Details (lilypads, frogs, cleanup text) Make the case!!! 🐸🗒️"}, {"post_id": 7142, "ts": "2026-06-11T22:36:54Z", "hours": 0.3486, "text": "FrogPad Devlog 001: what have I gotten myself into Tried to make a matrix while keeping pins clear for my OLED plans. I am not sure if I succeeded, will continue with tutorials and stuff tomorrow."}]...
|
Title: FrogPad by @FrogDude | Stardance
Devlogs:
Title: FrogPad by @FrogDude | Stardance
Devlogs:
FrogPad Devlog 001: what have I gotten myself into Tried to make a matrix while keeping pins clear for my OLED plans. I am not sure if I succeeded, will continue with tutorials and stuff tomorrow.
FrogPad Devlog 002: PCB? what’s a PCB? assigned footprints to the components and added to the PCB builder in KiCad. Twice. I accidentally made my switches LEDs, got very confused by the three tutorials I was referencing, and then asked the nice people in #hackpad for help. Next Steps (this weekend hopefully): Copper wire (?) PCB Edge cuts Screen Details (lilypads, frogs, cleanup text) Make the case!!! 🐸🗒️
Frog Pad Devlog 003: AHHHHHHH So I had to redo the PCB. Three Times. It was easier than rearranging all the parts to reorder them, but it sure did take a lot of trial and error. I had multiple YouTube Tutorials open; I am sorry to whoever watches my Lapse clips because I made a lot of cuts trying to not count research time. Most of today was reorganizing my parts for wiring/copper-ing and trying to align all my parts. I was going to do edge cuts today but it’s 10 PM right now and I have to be up in 8 hours. But everything’s connected! Tomorrow is hopefully edge cuts and updating the silkscreen, then running a sanity check before I do this all over again with OnShape. 🐸🗒️!
FrogPad Devlog 004: FINALLY, MODELING Redid the PCB. Again. I got it down to 99.925 mm on the larger side, so now I’m in compliance! Still waiting on a sanity check but hopefully I am finally done with this after (checks notes) THREE HOURS??? Began modeling my case for this on OnShape. It’s frog shaped. I am nothing if not on brand. I only have the bottom case so far, and I’m aiming to finish the whole thing by the end of the week. Next steps: Finish case Code/modify code for firmware Write README
FrogPad Devlog 005: Began work on firmware for keyboard; established key layout. – Swapped from numpad to sort of a themed quick commands pad (music control, delete key, etc) Discovered that OLEDs are probably the hardest part I could have chosen to include (what do you mean my two options are “probably doesn’t work with your OS” or “learn an entirely new coding language”) Began work on baby’s first GitHub Repo! Link should be accessible now, if not as soon as I ship. Next Steps: Setup QMK-Now Playing ( https://github.com/dob9601/qmk-nowplaying ) on board for OLED? Hopefully? I am not sure if it’ll work since I’m on Windows but worth a shot. (no I don’t know what this code stuff means, this is from my first test compiling)
FrogPad Devlog 07: we’re so back. (Please ignore any formatting issues, I am currently typing on my mobile device) MY KIT SHOWED UP! The past hour has been putting together parts, test fits, and overall design checks. I also had to sand some things because I accidentally made the port hole too small - hopefully that wound be an issue in the future… Next steps are to learn to sauder and then put stuff together for the case-off test, then install the case! (Image: my case, printed by the nice people over at #printing_legion)
Ships:
FrogPad Devlog 06: Shipped! FrogPad is a 12-key macropad with audio control, arrow keys, and a delete button for me to smash as needed. It also has an OLED, which can display animations and (hopefully) playing audio, all packed into a fun frog-shaped case. Frogs are awesome. Keyboards are awesome. This is my combination....
|
1793296403.9091048
|
1793382803.9091048
|
|
2651
|
Untitled project by @czekoloczek | Stardance
|
czekoloczek
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @czekoloczek | Stardanc Title: Untitled project by @czekoloczek | Stardance...
|
1792702288.824905
|
1793307088.824905
|
|
2650
|
Untitled project by @ary13 | Stardance
|
ary13
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @ary13 | Stardance
|
1792752799.367424
|
1793357599.367424
|
|
2649
|
Sam's Macropad by @samr | Stardance
|
samr
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Sam's Macropad by @samr | Stardance
|
1792767015.221239
|
1793371815.221239
|
|
2648
|
Raptor TVC rocket by @funfofacts | Stardance
|
funfofacts
|
0
|
0.9
|
0
|
[]
|
[{"post_id": 57298, "ts": "202 [{"post_id": 57298, "ts": "2026-08-29T12:25:57Z", "hours": 0.8992, "text": "I finished and polished up my existing TVC Gimbal design from a prior project. I design the overview of the open rocket file and then cadded it in fusion 360. After that, I had to modify my existing telmetry flight computer to run 3 timer channels for tvc. I am still contemplating between using this existing flight computer design, my prior stm32 h7 flight controller design, or designing a completely new controller from scratch."}]...
|
Title: Raptor TVC rocket by @funfofacts | Stardanc Title: Raptor TVC rocket by @funfofacts | Stardance
Devlogs:
I finished and polished up my existing TVC Gimbal design from a prior project. I design the overview of the open rocket file and then cadded it in fusion 360. After that, I had to modify my existing telmetry flight computer to run 3 timer channels for tvc. I am still contemplating between using this existing flight computer design, my prior stm32 h7 flight controller design, or designing a completely new controller from scratch....
|
1792680922.7351327
|
1793285722.7351327
|
|
2647
|
Duck game by @wrogers1616 | Stardance
|
wrogers1616
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Duck game by @wrogers1616 | Stardance
|
1792781604.7911682
|
1793386404.7911682
|
|
2646
|
My awesome macropad! by @opal | Stardance
|
opal
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @opal | Stardance
|
1792792396.9019191
|
1793397196.9019191
|
|
2645
|
My awesome macropad! by @AYOMIKUN | Stardance
|
AYOMIKUN
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @AYOMIKUN | Stardan Title: My awesome macropad! by @AYOMIKUN | Stardance...
|
1793191897.78245
|
1793796697.78245
|
|
2644
|
Untitled project by @dannwillz | Stardance
|
dannwillz
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @dannwillz | Stardance
|
1793292801.862895
|
1793897601.862895
|
|
2643
|
Dropper Drone by @Matthieu | Stardance
|
Matthieu
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Dropper Drone by @Matthieu | Stardance
|
1793177611.1954796
|
1793782411.1954796
|
|
2642
|
IdleMachine by @gabrielv | Stardance
|
gabrielv
|
0
|
5.76
|
0
|
[]
|
[{"post_id": 1635, "ts": "2026 [{"post_id": 1635, "ts": "2026-06-03T19:21:16Z", "hours": 2.1617, "text": "GitHub repository has been opened, and now the code editor has syntax highlighting! I’m using TreeSitter with a C# wrapper to parse the JS syntax and Jint to run it with custom functions. Logging output is working (printing both logs and errors)"}, {"post_id": 1086, "ts": "2026-06-02T22:03:06Z", "hours": 3.5939, "text": "Working on a tiny game project where player is tasked with creating modules for an operating system. Each level is a new module that has to be written, each increasing in complexity. Work from previous modules can be used when writing new ones."}]...
|
Title: IdleMachine by @gabrielv | Stardance
Devlo Title: IdleMachine by @gabrielv | Stardance
Devlogs:
Working on a tiny game project where player is tasked with creating modules for an operating system. Each level is a new module that has to be written, each increasing in complexity. Work from previous modules can be used when writing new ones.
GitHub repository has been opened, and now the code editor has syntax highlighting! I’m using TreeSitter with a C# wrapper to parse the JS syntax and Jint to run it with custom functions. Logging output is working (printing both logs and errors)...
|
1792770792.279217
|
1793375592.279217
|
|
2641
|
My first slack bot! by @AnnaCoutinho | Stardance
|
AnnaCoutinho
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @AnnaCoutinho | Star Title: My first slack bot! by @AnnaCoutinho | Stardance...
|
1793156172.4933617
|
1793760972.4933617
|
|
2640
|
The Cosmic Mileage and Age engine by @tapasya | St The Cosmic Mileage and Age engine by @tapasya | Stardance...
|
tapasya
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: The Cosmic Mileage and Age engine by @tapas Title: The Cosmic Mileage and Age engine by @tapasya | Stardance...
|
1792785022.8010423
|
1793389822.8010423
|
|
2639
|
Untitled by @AnnaCoutinho | Stardance
|
AnnaCoutinho
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @AnnaCoutinho | Stardance
|
1793256638.2796428
|
1793861438.2796428
|
|
2638
|
My first slack bot! by @claudia | Stardance
|
claudia
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @claudia | Stardance
|
1793210177.4061625
|
1793814977.4061625
|
|
2637
|
FLOPIC Editor by @SunnyFlops | Stardance
|
SunnyFlops
|
0
|
1.44
|
0
|
[]
|
[{"post_id": 26999, "ts": "202 [{"post_id": 26999, "ts": "2026-07-12T04:02:35Z", "hours": 1.4442, "text": "looks like a schematic i gues"}]...
|
Title: FLOPIC Editor by @SunnyFlops | Stardance
D Title: FLOPIC Editor by @SunnyFlops | Stardance
Devlogs:
looks like a schematic i gues...
|
1793292993.7972324
|
1793897793.7972324
|