|
2798
|
Untitled by @Dov | Stardance
|
Dov
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @Dov | Stardance
|
1792515120.6604602
|
1793119920.6604602
|
|
2799
|
Untitled by @Dov | Stardance
|
Dov
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @Dov | Stardance
|
1792486054.6983943
|
1793090854.6983943
|
|
2800
|
TEDS Pi by @Dov | Stardance
|
Dov
|
0
|
7.5
|
0
|
[]
|
[{"post_id": 7050, "ts": "2026 [{"post_id": 7050, "ts": "2026-06-11T20:18:28Z", "hours": 2.0894, "text": "so uhh i added the rk806 chip. i decided to attempt to reference the orange pi 5 / radxa rock pi 5c docs after gemini was suggesting me do some things that are VERY different to what the other sbcs did. i figured that these sbcs do work, so they have to know something ai doesnt. also its SOO cramped… i added capacitors for the input power / vcc_sys and more stuff. help me someone. oh yeah and gemini wanted to use 2 chips… despite both using 1. and then gemini was making hella errors. this is so not professional. both my writing and what gemini made up. don’t rely on gemini - also use “inspiration” and “reference” designs. despite geminis suggestions, i did everything nearly the opposite. yay."}, {"post_id": 5168, "ts": "2026-06-08T21:00:27Z", "hours": 2.3064, "text": "Implemented some of the power. I will be using USB PD power. I don’t think we need USB 3 speeds for what will be just power… I think? So USB 2 is used… for now? The FUSB will… DEMAND POWER! Gemini recommended me doing something with mosfets. I’m doubting it but uhh hopefully its fine… Next step? MORE POWER! aka RK806 time :) why am i using gemini? i think i mentioned already… and this is already taking a long time… with ai… and i don’t understand chinese docs, or understand some of what im doing… mb for the yap"}, {"post_id": 3589, "ts": "2026-06-06T16:17:07Z", "hours": 3.1053, "text": "I completed (mostly) the schematic for both the ram chips. I am using the K4U6E3S4AA-MGCL ram chips. Should support 2, but might place only 1… I still don’t know how much ram it has."}]...
|
Title: TEDS Pi by @Dov | Stardance
Devlogs:
I com Title: TEDS Pi by @Dov | Stardance
Devlogs:
I completed (mostly) the schematic for both the ram chips. I am using the K4U6E3S4AA-MGCL ram chips. Should support 2, but might place only 1… I still don’t know how much ram it has.
Implemented some of the power. I will be using USB PD power. I don’t think we need USB 3 speeds for what will be just power… I think? So USB 2 is used… for now? The FUSB will… DEMAND POWER! Gemini recommended me doing something with mosfets. I’m doubting it but uhh hopefully its fine… Next step? MORE POWER! aka RK806 time :) why am i using gemini? i think i mentioned already… and this is already taking a long time… with ai… and i don’t understand chinese docs, or understand some of what im doing… mb for the yap
so uhh i added the rk806 chip. i decided to attempt to reference the orange pi 5 / radxa rock pi 5c docs after gemini was suggesting me do some things that are VERY different to what the other sbcs did. i figured that these sbcs do work, so they have to know something ai doesnt. also its SOO cramped… i added capacitors for the input power / vcc_sys and more stuff. help me someone. oh yeah and gemini wanted to use 2 chips… despite both using 1. and then gemini was making hella errors. this is so not professional. both my writing and what gemini made up. don’t rely on gemini - also use “inspiration” and “reference” designs. despite geminis suggestions, i did everything nearly the opposite. yay....
|
1792637664.7896252
|
1793242464.7896252
|
|
2802
|
My awesome macropad! by @Muhammadjon | Stardance
|
Muhammadjon
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Muhammadjon | Star Title: My awesome macropad! by @Muhammadjon | Stardance...
|
1792551224.9525409
|
1793156024.9525409
|
|
2803
|
Untitled by @yangstyy | Stardance
|
yangstyy
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @yangstyy | Stardance
|
1792601274.6365266
|
1793206074.6365266
|
|
2804
|
Untitled by @Oren | Stardance
|
Oren
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @Oren | Stardance
|
1792673229.8840184
|
1793278029.8840184
|
|
2806
|
Untitled project by @david_negru | Stardance
|
david_negru
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @david_negru | Stardanc Title: Untitled project by @david_negru | Stardance...
|
1792482646.8913512
|
1793087446.8913512
|
|
2807
|
My hackpad by @Kyle | Stardance
|
Kyle
|
0
|
0.64
|
0
|
[]
|
[{"post_id": 1304, "ts": "2026 [{"post_id": 1304, "ts": "2026-06-03T06:41:47Z", "hours": 0.3694, "text": "Routed the pcb, next I’ll work on the case. I’m pretty happy with the pcb and I worked out how to sign it :D"}, {"post_id": 1292, "ts": "2026-06-03T06:03:35Z", "hours": 0.2725, "text": "Created the schematic (this is my first hardware project!), and started on the pcb. I need to do wiring next."}]...
|
Title: My hackpad by @Kyle | Stardance
Devlogs:
C Title: My hackpad by @Kyle | Stardance
Devlogs:
Created the schematic (this is my first hardware project!), and started on the pcb. I need to do wiring next.
Routed the pcb, next I’ll work on the case. I’m pretty happy with the pcb and I worked out how to sign it :D...
|
1792497273.1902792
|
1793102073.1902792
|
|
2808
|
My first slack bot! by @logdog83 | Stardance
|
logdog83
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @logdog83 | Stardanc Title: My first slack bot! by @logdog83 | Stardance...
|
1792554771.0722065
|
1793159571.0722065
|
|
2809
|
My first slack bot! by @Muhammadjon | Stardance
|
Muhammadjon
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Muhammadjon | Stard Title: My first slack bot! by @Muhammadjon | Stardance...
|
1792565526.008416
|
1793170326.008416
|
|
2810
|
My first slack bot! by @roosterdung0 | Stardance
|
roosterdung0
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @roosterdung0 | Star Title: My first slack bot! by @roosterdung0 | Stardance...
|
1792569024.4278688
|
1793173824.4278688
|
|
2811
|
Untitled by @ishowspeed | Stardance
|
ishowspeed
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @ishowspeed | Stardance
|
1792922078.3066955
|
1793786078.3066955
|
|
2812
|
My first slack bot! by @aliaasifmalbari | Stardanc My first slack bot! by @aliaasifmalbari | Stardance...
|
aliaasifmalbari
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @aliaasifmalbari | S Title: My first slack bot! by @aliaasifmalbari | Stardance...
|
1792569115.2056289
|
1793173915.2056289
|
|
2813
|
Butterfly Wall Display by @kdhriti15 | Stardance
|
kdhriti15
|
0
|
0.67
|
0
|
[]
|
[{"post_id": 506, "ts": "2026- [{"post_id": 506, "ts": "2026-06-01T23:57:30Z", "hours": 0.6703, "text": "Wrote Code for the Servos and Touch Module"}]...
|
Title: Butterfly Wall Display by @kdhriti15 | Star Title: Butterfly Wall Display by @kdhriti15 | Stardance
Devlogs:
Wrote Code for the Servos and Touch Module...
|
1792547289.9412513
|
1793152089.9412513
|
|
2814
|
My first slack bot! by @randresuy3 | Stardance
|
randresuy3
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @randresuy3 | Starda Title: My first slack bot! by @randresuy3 | Stardance...
|
1792766907.5393057
|
1793371707.5393057
|
|
2815
|
My awesome macropad! by @Sofi | Stardance
|
Sofi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Sofi | Stardance
|
1792493375.9883642
|
1793098175.9883642
|
|
2816
|
My first slack bot! by @Krys | Stardance
|
Krys
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Krys | Stardance
|
1792529624.4178932
|
1793134424.4178932
|
|
2817
|
Equa-cup by @TheAxoKnight | Stardance
|
TheAxoKnight
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Equa-cup by @TheAxoKnight | Stardance
|
1792766917.1929836
|
1793371717.1929836
|
|
2818
|
Untitled by @Sofi | Stardance
|
Sofi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @Sofi | Stardance
|
1792504251.4133666
|
1793109051.4133666
|
|
2819
|
Google Maps reviews analyzer by @Rayan | Stardance
|
Rayan
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Google Maps reviews analyzer by @Rayan | St Title: Google Maps reviews analyzer by @Rayan | Stardance...
|
1792637498.885727
|
1793242298.885727
|
|
2820
|
BoardScan by @v40565 | Stardance
|
v40565
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: BoardScan by @v40565 | Stardance
|
1792702488.7773235
|
1793307288.7773235
|
|
2821
|
My awesome macropad! by @aaron | Stardance
|
aaron
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @aaron | Stardance
|
1792482899.8773682
|
1793087699.8773682
|
|
2822
|
My first slack bot! by @Aurora-hack | Stardance
|
Aurora-hack
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Aurora-hack | Stard Title: My first slack bot! by @Aurora-hack | Stardance...
|
1792579653.375307
|
1793184453.375307
|
|
2823
|
Bean Study Space by @kawaiio22 | Stardance
|
kawaiio22
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Bean Study Space by @kawaiio22 | Stardance
|
1792479171.673315
|
1793083971.673315
|
|
2824
|
Terrain generator by @kuba_ch101 | Stardance
|
kuba_ch101
|
0
|
0.35
|
0
|
[]
|
[{"post_id": 1092, "ts": "2026 [{"post_id": 1092, "ts": "2026-06-02T22:24:45Z", "hours": 0.3472, "text": "now i can modify mesh resolution"}]...
|
Title: Terrain generator by @kuba_ch101 | Stardanc Title: Terrain generator by @kuba_ch101 | Stardance
Devlogs:
now i can modify mesh resolution...
|
1792637640.151195
|
1793242440.151195
|
|
2825
|
My first slack bot! by @MasterP | Stardance
|
MasterP
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @MasterP | Stardance
|
1792806735.1392581
|
1793411535.1392581
|
|
2826
|
Cognita Study by @cognitayohan | Stardance
|
cognitayohan
|
0
|
0.0
|
0
|
[]
|
[{"post_id": 1286, "ts": "2026 [{"post_id": 1286, "ts": "2026-06-03T05:34:05Z", "hours": 0.0, "text": "Cognita Study Devlog 1 - Updated LaTeX formatting to render math equations properly. Now we can study hard match concepts with proper formatting!! Added AI Video features- now you can generate video/audio summaries for your study materials for free! Much more to come!! Make sure to follow our instagram to continue to support us at: https://www.instagram.com/cognita.study/ Feel free to try out the study app FOR FREE at: https://cognitastudy.me"}]...
|
Title: Cognita Study by @cognitayohan | Stardance
Title: Cognita Study by @cognitayohan | Stardance
Devlogs:
Cognita Study Devlog 1 - Updated LaTeX formatting to render math equations properly. Now we can study hard match concepts with proper formatting!! Added AI Video features- now you can generate video/audio summaries for your study materials for free! Much more to come!! Make sure to follow our instagram to continue to support us at: https://www.instagram.com/cognita.study/ Feel free to try out the study app FOR FREE at: https://cognitastudy.me...
|
1792885874.2227561
|
1793749874.2227561
|
|
2827
|
My awesome macropad! by @Matthieu | Stardance
|
Matthieu
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Matthieu | Stardan Title: My awesome macropad! by @Matthieu | Stardance...
|
1792669840.602262
|
1793274640.602262
|
|
2829
|
My first slack bot! by @charleswmaus | Stardance
|
charleswmaus
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @charleswmaus | Star Title: My first slack bot! by @charleswmaus | Stardance...
|
1792536489.4225225
|
1793141289.4225225
|
|
2830
|
My first slack bot! by @rojen | Stardance
|
rojen
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @rojen | Stardance
|
1792525812.5076952
|
1793130612.5076952
|
|
2831
|
Paralasis by @WizardOfWhimsy | Stardance
|
WizardOfWhimsy
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Paralasis by @WizardOfWhimsy | Stardance
|
1792634073.5430176
|
1793238873.5430176
|
|
2832
|
Randominity by @Bitwise | Stardance
|
Bitwise
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Randominity by @Bitwise | Stardance
|
1792547365.3972728
|
1793152165.3972728
|
|
2833
|
Personal Website! by @Eason | Stardance
|
Eason
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Personal Website! by @Eason | Stardance
|
1792482461.593632
|
1793087261.593632
|
|
2834
|
KPlan by @AliciaE | Stardance
|
AliciaE
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: KPlan by @AliciaE | Stardance
|
1792554857.4129608
|
1793159657.4129608
|
|
2835
|
My simple HTML Website by @StarDustShineBright | S My simple HTML Website by @StarDustShineBright | Stardance...
|
StarDustShineBright
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My simple HTML Website by @StarDustShineBri Title: My simple HTML Website by @StarDustShineBright | Stardance...
|
1792680884.8187943
|
1793285684.8187943
|
|
2836
|
My first slack bot! by @ajayvabr | Stardance
|
ajayvabr
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @ajayvabr | Stardanc Title: My first slack bot! by @ajayvabr | Stardance...
|
1792554622.8522584
|
1793159422.8522584
|
|
2837
|
Telescope by @Whitney | Stardance
|
Whitney
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Telescope by @Whitney | Stardance
|
1792698658.0466788
|
1793303458.0466788
|
|
2840
|
My awesome macropad! by @Aurora-hack | Stardance
|
Aurora-hack
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Aurora-hack | Star Title: My awesome macropad! by @Aurora-hack | Stardance...
|
1792583636.1497934
|
1793188436.1497934
|
|
2841
|
My personal slack bot! by @JAME | Stardance
|
JAME
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My personal slack bot! by @JAME | Stardance
|
1792741946.6882114
|
1793346746.6882114
|
|
2842
|
LodeStone by @ThePangel | Stardance
|
ThePangel
|
0
|
3.87
|
0
|
[]
|
[{"post_id": 39461, "ts": "202 [{"post_id": 39461, "ts": "2026-08-02T12:55:51Z", "hours": 3.8744, "text": "I’m moving and deleting this project from Macondo to Stardust, so here is what it’s about ! Just recently my district’s fair started, and between all the crowds and the size of the fairgrounds It’s pretty hard to find my friends, especially when we get separated, so with that and me playing a bunch of Minecraft this idea of a Mesh LoRa P2P compass came about. The name is a reference to the lodestone block in Minecraft which lets you set custom compass targets. The device consists of 7 components: Seeed Studio XIAO ESP32 S3 Plus, Seeed Studio Lora32 SX1262, Seeed Studio L76K GNSS Module, GY-9250 BMP085 Module, GC9A01 Round TFT screen, 503040 600mAh Battery, and a Flexible antenna for the gps module. Each node connects to each other individually or in groups, working simultaneously in a mesh. Pairing is done by a gesture password consisting of holds and taps, basically a morse code pin. You pair your devices using the same pin, then they handshake, share keys, and establish a connection. Even if they are not paired, nodes retransmit incoming data packets to other users in the network to increase range. The compass and map are drawn by taking GPS data from both nodes and the GY-9250 compass and accelerometer to calculate the direction the other node is at. To optimize battery life and not saturate the airwaves, my system uses a Supply-demand approach. When the node is still and facing away from the user, it is just listening for either location packets or a request packet. If it receives a location packet, it will update that node’s location in memory. If it receives a request packet, it will send its own location. When the node is pulled up to be viewed, it will send a request packet to other nodes to update their location in memory, and a location packet so other nodes update it’s location. It should ping at a set interval tied to speed using the accelerometer, meaning the more they move the more they send, if they are still it will default to some configurable interval. We could also tune transmition gain based on distance. Interaction with the node will be based on gestures using the GY-9250 accelerometer and gyro to navigate menus similar to a smart watch. We can leverage our LoRa connection to send quick preconfigurable messages or write one using a gesture keyboard or morse code. An SOS function sends a signal to all nodes paired, making the nodes flash red and highlight the SOS’ing node. The PCB is a simple 4 layer PCB that houses all of the off the shelf components. The two outer planes hold traces and GND while the two inner layers are full ground pours, a bunch of vias connect the 4 GNDs to improve RF performance. I will make a 3D printed case for it to be portable and comfortable. I would like this project to be modular and community focused, so I encourage collaboration integrating other microcontrollers, screens, or IMUs all from the same modular firmware."}]...
|
Title: LodeStone by @ThePangel | Stardance
Devlog Title: LodeStone by @ThePangel | Stardance
Devlogs:
I’m moving and deleting this project from Macondo to Stardust, so here is what it’s about ! Just recently my district’s fair started, and between all the crowds and the size of the fairgrounds It’s pretty hard to find my friends, especially when we get separated, so with that and me playing a bunch of Minecraft this idea of a Mesh LoRa P2P compass came about. The name is a reference to the lodestone block in Minecraft which lets you set custom compass targets. The device consists of 7 components: Seeed Studio XIAO ESP32 S3 Plus, Seeed Studio Lora32 SX1262, Seeed Studio L76K GNSS Module, GY-9250 BMP085 Module, GC9A01 Round TFT screen, 503040 600mAh Battery, and a Flexible antenna for the gps module. Each node connects to each other individually or in groups, working simultaneously in a mesh. Pairing is done by a gesture password consisting of holds and taps, basically a morse code pin. You pair your devices using the same pin, then they handshake, share keys, and establish a connection. Even if they are not paired, nodes retransmit incoming data packets to other users in the network to increase range. The compass and map are drawn by taking GPS data from both nodes and the GY-9250 compass and accelerometer to calculate the direction the other node is at. To optimize battery life and not saturate the airwaves, my system uses a Supply-demand approach. When the node is still and facing away from the user, it is just listening for either location packets or a request packet. If it receives a location packet, it will update that node’s location in memory. If it receives a request packet, it will send its own location. When the node is pulled up to be viewed, it will send a request packet to other nodes to update their location in memory, and a location packet so other nodes update it’s location. It should ping at a set interval tied to speed using the accelerometer, meaning the more they move the more they send, if they are still it will default to some configurable interval. We could also tune transmition gain based on distance. Interaction with the node will be based on gestures using the GY-9250 accelerometer and gyro to navigate menus similar to a smart watch. We can leverage our LoRa connection to send quick preconfigurable messages or write one using a gesture keyboard or morse code. An SOS function sends a signal to all nodes paired, making the nodes flash red and highlight the SOS’ing node. The PCB is a simple 4 layer PCB that houses all of the off the shelf components. The two outer planes hold traces and GND while the two inner layers are full ground pours, a bunch of vias connect the 4 GNDs to improve RF performance. I will make a 3D printed case for it to be portable and comfortable. I would like this project to be modular and community focused, so I encourage collaboration integrating other microcontrollers, screens, or IMUs all from the same modular firmware....
|
1792619289.7825317
|
1793224089.7825317
|
|
2843
|
My first slack bot! by @Jacky56 | Stardance
|
Jacky56
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Jacky56 | Stardance
|
1792619431.946374
|
1793224231.946374
|
|
2844
|
StyleLife by @Nelstar | Stardance
|
Nelstar
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: StyleLife by @Nelstar | Stardance
|
1792709612.040602
|
1793314412.040602
|
|
2845
|
Untitled by @EthanK | Stardance
|
EthanK
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @EthanK | Stardance
|
1792698762.8383536
|
1793303562.8383536
|
|
2847
|
Locally Hosted Drive Alternative by @charleswmaus Locally Hosted Drive Alternative by @charleswmaus | Stardance...
|
charleswmaus
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Locally Hosted Drive Alternative by @charle Title: Locally Hosted Drive Alternative by @charleswmaus | Stardance...
|
1792705847.110975
|
1793310647.110975
|
|
2848
|
My first slack bot! by @SilverCanvas | Stardance
|
SilverCanvas
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @SilverCanvas | Star Title: My first slack bot! by @SilverCanvas | Stardance...
|
1792623273.8120985
|
1793228073.8120985
|
|
2849
|
reusable satellite by @Tony1292 | Stardance
|
Tony1292
|
0
|
29.52
|
0
|
[]
|
[{"post_id": 38929, "ts": "202 [{"post_id": 38929, "ts": "2026-08-01T15:14:19Z", "hours": 2.6786, "text": "I have added a camera system to the satellite and it rotates when it his the sun. It has a gear box that I had laying in my room and disassembled and a toy camera and added to the satellite. Know I just need the rest of the hardware."}, {"post_id": 14523, "ts": "2026-06-23T17:42:20Z", "hours": 1.8, "text": "I made a better recovery system. It is for the most part, the same.But of the instead rubber bands I used springs from a pen."}, {"post_id": 13367, "ts": "2026-06-21T21:59:17Z", "hours": 0.8167, "text": "I made my prototype for the recover system. I will 3D print the the prototype part to make it look cleaner an better. I will also change from tape hinges to actual metal hinges."}, {"post_id": 12695, "ts": "2026-06-20T18:49:13Z", "hours": 0.4336, "text": "I made my live satellite dashboard with lovable.Ai. Know the next step is to make the hardware and wire everything."}, {"post_id": 12173, "ts": "2026-06-19T21:44:48Z", "hours": 1.4422, "text": "Today I assembled the frame for my satellite and I used some screws and some sticks that I had like the next step will be to put the electronics in and make it work. It does not look the cleanest but it looks cool."}, {"post_id": 10954, "ts": "2026-06-17T23:28:03Z", "hours": 3.9822, "text": "I started 3D printing the the parts needed for my project. I just finished three part. I just need to print two more . Next step will be to build the frame."}, {"post_id": 9486, "ts": "2026-06-15T20:46:31Z", "hours": 11.3808, "text": "I was trying to make my base fro the satellite. Because the frame I had was to big. So I looked on Bambu maker world and found this. “Next step is to print the model."}, {"post_id": 2411, "ts": "2026-06-04T21:30:47Z", "hours": 0.4728, "text": "I decided to learn python because lot of people recommended to learn python first, for what i am trying to do with my project. “No idea what i am doing”😅"}, {"post_id": 2332, "ts": "2026-06-04T19:26:05Z", "hours": 0.3475, "text": "Working on my 3D printing file for my project I’m using tinkercad really big and friendly and I really like Taylor cat recommend using it for beginners"}, {"post_id": 2309, "ts": "2026-06-04T18:41:11Z", "hours": 0.94, "text": "I have my frame for my project. Sturdy and decent sized. use to be a nightstand."}, {"post_id": 2222, "ts": "2026-06-04T16:40:41Z", "hours": 0.3097, "text": "Learning code for my project =] I love this community I’ve been learning so much with the people around me."}, {"post_id": 1913, "ts": "2026-06-04T04:23:14Z", "hours": 0.325, "text": "The code is coming out good! with some bug but thanks to the help from hack club and other people in stardance . Thanks everyone for the help."}, {"post_id": 1905, "ts": "2026-06-04T03:59:24Z", "hours": 0.9158, "text": "Just made my schematic! pretty simple but it should be able to send the data from the GY-BMP280 module to a Commander controller type website."}, {"post_id": 1535, "ts": "2026-06-03T16:48:28Z", "hours": 1.3389, "text": "I just finished finding the hardware for my project. I am also going to use a GY-BMP280 sensor. Amazon the goat!"}, {"post_id": 1033, "ts": "2026-06-02T20:28:55Z", "hours": 2.34, "text": "I am working on a reusable satellite that has a modular type of body that can be used many times but also with an easy repair system. Also the satellite can have many uses of types of satellites. This image is from Phonebloks. My project will be this but in satellite form."}]...
|
Title: reusable satellite by @Tony1292 | Stardance Title: reusable satellite by @Tony1292 | Stardance
Devlogs:
I am working on a reusable satellite that has a modular type of body that can be used many times but also with an easy repair system. Also the satellite can have many uses of types of satellites. This image is from Phonebloks. My project will be this but in satellite form.
I just finished finding the hardware for my project. I am also going to use a GY-BMP280 sensor. Amazon the goat!
Just made my schematic! pretty simple but it should be able to send the data from the GY-BMP280 module to a Commander controller type website.
The code is coming out good! with some bug but thanks to the help from hack club and other people in stardance . Thanks everyone for the help.
Learning code for my project =] I love this community I’ve been learning so much with the people around me.
I have my frame for my project. Sturdy and decent sized. use to be a nightstand.
Working on my 3D printing file for my project I’m using tinkercad really big and friendly and I really like Taylor cat recommend using it for beginners
I decided to learn python because lot of people recommended to learn python first, for what i am trying to do with my project. “No idea what i am doing”😅
I was trying to make my base fro the satellite. Because the frame I had was to big. So I looked on Bambu maker world and found this. “Next step is to print the model.
I started 3D printing the the parts needed for my project. I just finished three part. I just need to print two more . Next step will be to build the frame.
Today I assembled the frame for my satellite and I used some screws and some sticks that I had like the next step will be to put the electronics in and make it work. It does not look the cleanest but it looks cool.
I made my live satellite dashboard with lovable.Ai. Know the next step is to make the hardware and wire everything.
I made my prototype for the recover system. I will 3D print the the prototype part to make it look cleaner an better. I will also change from tape hinges to actual metal hinges.
I made a better recovery system. It is for the most part, the same.But of the instead rubber bands I used springs from a pen.
I have added a camera system to the satellite and it rotates when it his the sun. It has a gear box that I had laying in my room and disassembled and a toy camera and added to the satellite. Know I just need the rest of the hardware....
|
1792532866.5156105
|
1793137666.5156105
|
|
2850
|
Stardance Leaderboard Tracker by @mathias | Starda Stardance Leaderboard Tracker by @mathias | Stardance...
|
mathias
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Stardance Leaderboard Tracker by @mathias | Title: Stardance Leaderboard Tracker by @mathias | Stardance...
|
1792727381.7835317
|
1793332181.7835317
|
|
2852
|
Waypoints by @Mo | Stardance
|
Mo
|
0
|
3.85
|
0
|
[]
|
[{"post_id": 29674, "ts": "202 [{"post_id": 29674, "ts": "2026-07-16T19:00:00Z", "hours": 2.7022, "text": "I have added a registry with unique IDs and a recursive function. The datapack now works with multiple waypoints wich was way to challenging but I think that it is really cool!"}, {"post_id": 27301, "ts": "2026-07-12T19:22:47Z", "hours": 1.1481, "text": "Im working on a waypoints datapack. I think it looks really good so far, but there are a lot of challenging things that I need to do next."}]...
|
Title: Waypoints by @Mo | Stardance
Devlogs:
Im w Title: Waypoints by @Mo | Stardance
Devlogs:
Im working on a waypoints datapack. I think it looks really good so far, but there are a lot of challenging things that I need to do next.
I have added a registry with unique IDs and a recursive function. The datapack now works with multiple waypoints wich was way to challenging but I think that it is really cool!...
|
1792576111.9384089
|
1793180911.9384089
|
|
2853
|
A retro arcade style fighting game with a cabinet A retro arcade style fighting game with a cabinet by @danielgman98 | Stardance...
|
danielgman98
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: A retro arcade style fighting game with a c Title: A retro arcade style fighting game with a cabinet by @danielgman98 | Stardance...
|
1792522441.1520972
|
1793127241.1520972
|
|
2854
|
My awesome macropad! by @ashlovesnoodle | Stardanc My awesome macropad! by @ashlovesnoodle | Stardance...
|
ashlovesnoodle
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @ashlovesnoodle | S Title: My awesome macropad! by @ashlovesnoodle | Stardance...
|
1792691291.333655
|
1793296091.333655
|