|
55868
|
hackpad by @Avizat | Stardance
|
Avizat
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @Avizat | Stardance
|
1793357418.227367
|
1793962218.227367
|
|
63359
|
hackpad by @Ayangamer557 | Stardance
|
Ayangamer557
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @Ayangamer557 | Stardance
|
1793660187.5138538
|
1794264987.5138538
|
|
62568
|
hackpad by @Dimeji | Stardance
|
Dimeji
|
0
|
11.58
|
0
|
[]
|
[{"post_id": 77186, "ts": "202 [{"post_id": 77186, "ts": "2026-10-05T23:59:20Z", "hours": 1.1158, "text": "Finally got to the firmware and decided to calm myself down and take a break. Took a good while to figure out a lick of what the stuff means on here and I’m still not sure I perfectly get it, But its something which beats nothing"}, {"post_id": 73615, "ts": "2026-09-25T14:12:51Z", "hours": 3.7903, "text": "Can you believe I had to completely redesign this from the beginning, but at least it looks a lot better now, I forgot to activate lapse quite a few times so a good bit wasnt recorded but we move, I just need to figure out the firmware"}, {"post_id": 70831, "ts": "2026-09-19T20:48:54Z", "hours": 1.7614, "text": "Took me genuinely FOREVER to find the SW_CHERRY_MX_1.00U.step file, also really tricky with the usb c hole for the case"}, {"post_id": 70518, "ts": "2026-09-19T09:53:14Z", "hours": 3.6419, "text": "Mostly done making the case, am curious tho whether the usb cutout is supposed to be for a specific usb port, the guide is NOT clear at all"}, {"post_id": 69884, "ts": "2026-09-18T00:17:54Z", "hours": 1.2694, "text": "built the PCB yesterday and had a bit of trouble figuring out the offset thing for the rectangle. I gotta figure out how to put the accomodating holes tho"}]...
|
Title: hackpad by @Dimeji | Stardance
Devlogs:
bu Title: hackpad by @Dimeji | Stardance
Devlogs:
built the PCB yesterday and had a bit of trouble figuring out the offset thing for the rectangle. I gotta figure out how to put the accomodating holes tho
Mostly done making the case, am curious tho whether the usb cutout is supposed to be for a specific usb port, the guide is NOT clear at all
Took me genuinely FOREVER to find the SW_CHERRY_MX_1.00U.step file, also really tricky with the usb c hole for the case
Can you believe I had to completely redesign this from the beginning, but at least it looks a lot better now, I forgot to activate lapse quite a few times so a good bit wasnt recorded but we move, I just need to figure out the firmware
Finally got to the firmware and decided to calm myself down and take a break. Took a good while to figure out a lick of what the stuff means on here and I’m still not sure I perfectly get it, But its something which beats nothing...
|
1793656257.223576
|
1794261057.223576
|
|
47679
|
hackpad by @Rexley | Stardance
|
Rexley
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @Rexley | Stardance
|
1793191828.3350523
|
1793796628.3350523
|
|
58742
|
hackpad by @RoyalK | Stardance
|
RoyalK
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @RoyalK | Stardance
|
1793509061.371131
|
1794113861.371131
|
|
70524
|
hackpad by @aagam3023 | Stardance
|
aagam3023
|
0
|
2.52
|
0
|
[]
|
[{"post_id": 81211, "ts": "202 [{"post_id": 81211, "ts": "2026-10-20T09:51:27Z", "hours": 2.5186, "text": "Today, I worked on my Hackpad project by designing the enclosure in Onshape. I added the USB port opening and internal mounting points, and exported the 3D model as a STEP file. I also uploaded the CAD file to GitHub so my design is easy to access and review. Next, I’ll refine the enclosure and check that the PCB and components fit properly inside the case."}]...
|
Title: hackpad by @aagam3023 | Stardance
Devlogs: Title: hackpad by @aagam3023 | Stardance
Devlogs:
Today, I worked on my Hackpad project by designing the enclosure in Onshape. I added the USB port opening and internal mounting points, and exported the 3D model as a STEP file. I also uploaded the CAD file to GitHub so my design is easy to access and review. Next, I’ll refine the enclosure and check that the PCB and components fit properly inside the case....
|
1793642067.456139
|
1794246867.456139
|
|
46044
|
hackpad by @aaronst_03 | Stardance
|
aaronst_03
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @aaronst_03 | Stardance
|
1793364851.223391
|
1793969651.223391
|
|
32624
|
hackpad by @bgr3010 | Stardance
|
bgr3010
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @bgr3010 | Stardance
|
1793494228.4900842
|
1794099028.4900842
|
|
58509
|
hackpad by @divij_chaudhry | Stardance
|
divij_chaudhry
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @divij_chaudhry | Stardance
|
1793497647.6427648
|
1794102447.6427648
|
|
59682
|
hackpad by @hardikgupta2232 | Stardance
|
hardikgupta2232
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @hardikgupta2232 | Stardance
|
1793638037.0932393
|
1794242837.0932393
|
|
64382
|
hackpad by @ishowspeed | Stardance
|
ishowspeed
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @ishowspeed | Stardance
|
1793674285.18969
|
1794279085.18969
|
|
50580
|
hackpad by @iva33 | Stardance
|
iva33
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @iva33 | Stardance
|
1793588174.1934159
|
1794452174.1934159
|
|
65926
|
hackpad by @jaivi0012 | Stardance
|
jaivi0012
|
0
|
1.05
|
0
|
[]
|
[{"post_id": 73898, "ts": "202 [{"post_id": 73898, "ts": "2026-09-26T09:00:06Z", "hours": 0.7669, "text": "made the usb connector but im a begginer so it took me a while as i didnt understand half the things happening"}, {"post_id": 73875, "ts": "2026-09-26T07:22:28Z", "hours": 0.2833, "text": "hackpad designing going well hope i didnt do anything wrong"}]...
|
Title: hackpad by @jaivi0012 | Stardance
Devlogs: Title: hackpad by @jaivi0012 | Stardance
Devlogs:
hackpad designing going well hope i didnt do anything wrong
made the usb connector but im a begginer so it took me a while as i didnt understand half the things happening...
|
1793706960.8653307
|
1794311760.8653307
|
|
43500
|
hackpad by @joyo | Stardance
|
joyo
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @joyo | Stardance
|
1793227796.4822607
|
1793832596.4822607
|
|
43501
|
hackpad by @joyo | Stardance
|
joyo
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @joyo | Stardance
|
1793227797.3545003
|
1793832597.3545003
|
|
59114
|
hackpad by @juli13 | Stardance
|
juli13
|
0
|
3.58
|
0
|
[]
|
[{"post_id": 63560, "ts": "202 [{"post_id": 63560, "ts": "2026-09-07T14:04:40Z", "hours": 3.5817, "text": "hackpad"}]...
|
Title: hackpad by @juli13 | Stardance
Devlogs:
ha Title: hackpad by @juli13 | Stardance
Devlogs:
hackpad...
|
1793533756.1946774
|
1794138556.1946774
|
|
69431
|
hackpad by @kus_ | Stardance
|
kus_
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @kus_ | Stardance
|
1793580488.6617286
|
1794185288.6617286
|
|
56065
|
hackpad by @lee264 | Stardance
|
lee264
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @lee264 | Stardance
|
1793364784.1362734
|
1793969584.1362734
|
|
51181
|
hackpad by @magmafish | Stardance
|
magmafish
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @magmafish | Stardance
|
1793379263.5606167
|
1793984063.5606167
|
|
47189
|
hackpad by @meesvandijk | Stardance
|
meesvandijk
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @meesvandijk | Stardance
|
1793170473.9381237
|
1793775273.9381237
|
|
60799
|
hackpad by @muh_dawood990 | Stardance
|
muh_dawood990
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @muh_dawood990 | Stardance
|
1793645666.4945545
|
1794250466.4945545
|
|
65026
|
hackpad by @nurali | Stardance
|
nurali
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @nurali | Stardance
|
1793695840.1655896
|
1794300640.1655896
|
|
57528
|
hackpad by @omkaushal1857 | Stardance
|
omkaushal1857
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @omkaushal1857 | Stardance
|
1793443840.7904415
|
1794048640.7904415
|
|
59737
|
hackpad by @plillow | Stardance
|
plillow
|
0
|
1.14
|
0
|
[]
|
[{"post_id": 70479, "ts": "202 [{"post_id": 70479, "ts": "2026-09-19T08:18:08Z", "hours": 0.8169, "text": "Cad finished"}, {"post_id": 70434, "ts": "2026-09-19T05:55:28Z", "hours": 0.3244, "text": "Pcb i completed for the first time, first time using kicad"}]...
|
Title: hackpad by @plillow | Stardance
Devlogs:
P Title: hackpad by @plillow | Stardance
Devlogs:
Pcb i completed for the first time, first time using kicad
Cad finished...
|
1793638308.0841975
|
1794243108.0841975
|
|
49461
|
hackpad by @proobker | Stardance
|
proobker
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @proobker | Stardance
|
1793285618.54914
|
1793890418.54914
|
|
64675
|
hackpad by @puoiyip | Stardance
|
puoiyip
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @puoiyip | Stardance
|
1793677997.3850133
|
1794282797.3850133
|
|
13634
|
hackpad by @reimunyancat | Stardance
|
reimunyancat
|
1
|
8.23
|
0
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-21T07:30:08Z", "hours": 4.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "Designing the case was a real chore; it was so difficult. I haven’t completely decided on the keymap yet, but I plan to think about the firmware after I receive and assemble it.", "repo": "https://github.com/reimunyancat/hackpad", "demo": ""}]...
|
[{"post_id": 45490, "ts": "202 [{"post_id": 45490, "ts": "2026-08-12T00:52:29Z", "hours": 4.2317, "text": "Since I was installing the module myself, the fit wasn’t quite right, so I had to make adjustments while going back and forth between the PCB and the case. It was truly difficult, but… I managed to pull it off."}, {"post_id": 12594, "ts": "2026-06-20T15:55:22Z", "hours": 1.5261, "text": "Finished the PCB, so this round was all about the case. I went with a sandwich design: a bottom shell that holds the PCB and a top plate with 14mm cutouts the switches snap into, bolted together with M3×16 screws into heatset inserts.I modeled the whole thing myself in Fusion 360 — bottom case, top plate, and the full assembly. Everything’s dimensioned around the real part measurements: 0.2mm tolerance on the mating surfaces, a USB-C cutout on the side wall for the XIAO, and openings for the encoder knob and the OLED. Six standoffs inside keep the board from flexing.Exported all three parts as .STEP (Bottom.STEP, Top.STEP, assembled-model.STEP) — STEP keeps the exact geometry, and the print team converts to STL on their end. Whole thing fits well within the 200×200×100mm limit.Case = done. Next up: firmware."}, {"post_id": 7499, "ts": "2026-06-12T14:39:09Z", "hours": 1.5156, "text": "I installed Fusion to design a case for the PCB; I calculated the dimensions and entered them into the parameters list to streamline future work."}, {"post_id": 5425, "ts": "2026-06-09T05:57:59Z", "hours": 0.6561, "text": "I have finished designing the PCB board. It was my first time doing this, so it was tough constantly searching and asking AI, but I am glad to have completed it anyway."}, {"post_id": 5386, "ts": "2026-06-09T04:04:34Z", "hours": 0.3842, "text": "Start PCB layout — Create a 19.05mm custom grid and arrange 9 switches in a 3x3 configuration, placing diodes D1 through D9 below each switch in the same direction. Place the XIAO, encoder (SW10), and OLED header (J1) around the grid (detailed positioning in progress)."}]...
|
Title: hackpad by @reimunyancat | Stardance
Devlo Title: hackpad by @reimunyancat | Stardance
Devlogs:
Start PCB layout — Create a 19.05mm custom grid and arrange 9 switches in a 3x3 configuration, placing diodes D1 through D9 below each switch in the same direction. Place the XIAO, encoder (SW10), and OLED header (J1) around the grid (detailed positioning in progress).
I have finished designing the PCB board. It was my first time doing this, so it was tough constantly searching and asking AI, but I am glad to have completed it anyway.
I installed Fusion to design a case for the PCB; I calculated the dimensions and entered them into the parameters list to streamline future work.
Finished the PCB, so this round was all about the case. I went with a sandwich design: a bottom shell that holds the PCB and a top plate with 14mm cutouts the switches snap into, bolted together with M3×16 screws into heatset inserts.I modeled the whole thing myself in Fusion 360 — bottom case, top plate, and the full assembly. Everything’s dimensioned around the real part measurements: 0.2mm tolerance on the mating surfaces, a USB-C cutout on the side wall for the XIAO, and openings for the encoder knob and the OLED. Six standoffs inside keep the board from flexing.Exported all three parts as .STEP (Bottom.STEP, Top.STEP, assembled-model.STEP) — STEP keeps the exact geometry, and the print team converts to STL on their end. Whole thing fits well within the 200×200×100mm limit.Case = done. Next up: firmware.
Since I was installing the module myself, the fit wasn’t quite right, so I had to make adjustments while going back and forth between the PCB and the case. It was truly difficult, but… I managed to pull it off.
Ships:
Designing the case was a real chore; it was so difficult. I haven’t completely decided on the keymap yet, but I plan to think about the firmware after I receive and assemble it....
|
1792878559.763728
|
1793742559.763728
|
|
55664
|
hackpad by @rena | Stardance
|
rena
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @rena | Stardance
|
1793339646.124319
|
1793944446.124319
|
|
8774
|
hackpad by @sahilalt123 | Stardance
|
sahilalt123
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @sahilalt123 | Stardance
|
1793199337.425298
|
1793804137.425298
|
|
19303
|
hackpad by @sailor_lucas | Stardance
|
sailor_lucas
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @sailor_lucas | Stardance
|
1793418509.625015
|
1794023309.625015
|
|
30765
|
hackpad by @sprext | Stardance
|
sprext
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @sprext | Stardance
|
1792918434.27988
|
1793782434.27988
|
|
59409
|
hackpad by @usmanbatman | Stardance
|
usmanbatman
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @usmanbatman | Stardance
|
1793559061.442801
|
1794163861.442801
|
|
54402
|
hackpad by @verityhey | Stardance
|
verityhey
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @verityhey | Stardance
|
1793541053.4231868
|
1794145853.4231868
|
|
54709
|
hackpad by @vrishi | Stardance
|
vrishi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad by @vrishi | Stardance
|
1793562810.9314587
|
1794426810.9314587
|
|
67591
|
hackpad by @yaseenmb11 | Stardance
|
yaseenmb11
|
0
|
3.11
|
0
|
[]
|
[{"post_id": 77151, "ts": "202 [{"post_id": 77151, "ts": "2026-10-05T19:51:16Z", "hours": 3.1069, "text": "A really simple hackpad with lots of functionality from all its layers"}]...
|
Title: hackpad by @yaseenmb11 | Stardance
Devlogs Title: hackpad by @yaseenmb11 | Stardance
Devlogs:
A really simple hackpad with lots of functionality from all its layers...
|
1793112659.7238402
|
1793717459.7238402
|
|
650
|
hackpad by kr4phy by @kr4phy | Stardance
|
kr4phy
|
0
|
2.4
|
0
|
[]
|
[{"post_id": 83241, "ts": "202 [{"post_id": 83241, "ts": "2026-10-27T13:50:05Z", "hours": 1.1817, "text": "PCB design is much harder than I thought! The routing was especially difficult. Luckily, I found a tool called “freerouting” and was barely able to pull it off with that. If it weren’t for that, I probably wouldn’t have been able to finish the routing by the end of the year."}, {"post_id": 83227, "ts": "2026-10-27T12:15:53Z", "hours": 1.2133, "text": "This is my first PCB. It looks messy, but I can’t clean up this for now.."}]...
|
Title: hackpad by kr4phy by @kr4phy | Stardance
D Title: hackpad by kr4phy by @kr4phy | Stardance
Devlogs:
This is my first PCB. It looks messy, but I can’t clean up this for now..
PCB design is much harder than I thought! The routing was especially difficult. Luckily, I found a tool called “freerouting” and was barely able to pull it off with that. If it weren’t for that, I probably wouldn’t have been able to finish the routing by the end of the year....
|
1793433416.1369886
|
1794038216.1369886
|
|
62413
|
hackpad macropad by @cricket8856 | Stardance
|
cricket8856
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad macropad by @cricket8856 | Stardanc Title: hackpad macropad by @cricket8856 | Stardance...
|
1793656100.7437088
|
1794260900.7437088
|
|
65489
|
hackpad obv by @sarthaksingh5702 | Stardance
|
sarthaksingh5702
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad obv by @sarthaksingh5702 | Stardanc Title: hackpad obv by @sarthaksingh5702 | Stardance...
|
1793702862.2894685
|
1794307662.2894685
|
|
46618
|
hackpad of hackpad of hackpad^3 by @harshjmakwana1 hackpad of hackpad of hackpad^3 by @harshjmakwana13 | Stardance...
|
harshjmakwana13
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad of hackpad of hackpad^3 by @harshjm Title: hackpad of hackpad of hackpad^3 by @harshjmakwana13 | Stardance...
|
1793141400.4221005
|
1793746200.4221005
|
|
35351
|
hackpad synth by @mikeshallmake1331 | Stardance
|
mikeshallmake1331
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad synth by @mikeshallmake1331 | Stard Title: hackpad synth by @mikeshallmake1331 | Stardance...
|
1793235307.314071
|
1793840107.314071
|
|
60795
|
hackpad thing by @annie_wang8911 | Stardance
|
annie_wang8911
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad thing by @annie_wang8911 | Stardanc Title: hackpad thing by @annie_wang8911 | Stardance...
|
1793645663.6617036
|
1794250463.6617036
|
|
68344
|
hackpad thingy by @chezburger | Stardance
|
chezburger
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad thingy by @chezburger | Stardance
|
1793120001.5523057
|
1793724801.5523057
|
|
68345
|
hackpad thingy by @chezburger | Stardance
|
chezburger
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad thingy by @chezburger | Stardance
|
1793120003.8810048
|
1793724803.8810048
|
|
43138
|
hackpad! by @marygoat | Stardance
|
marygoat
|
0
|
1.08
|
0
|
[]
|
[{"post_id": 57022, "ts": "202 [{"post_id": 57022, "ts": "2026-08-29T02:59:48Z", "hours": 0.6172, "text": "HACKPAD! DEVLOG: #2 making the case okay . . . it took me an EMBARRASSING long amount of time to figure out how to make the plates. . . id insert the plate and then it’d be oriented some different shape, and that took me HOURS to figure out. i actually dropped the project cause i was just so confused, but i tried another plate and it . . . worked better. it was finally in the right orientation! i had to manually adjust it, but i got it eventually! i got the basic case done now, and now i gotta go onto the firmware! now that i got things done, im pretty proud that i figured this out! ive been wanting to do this mission for a while, so coming back to it and not giving up completely is sweet!"}, {"post_id": 39617, "ts": "2026-08-02T18:33:00Z", "hours": 0.4667, "text": "hackpad! started off the hackpad mission, which has interested me since the beginning but kinda scared me since im not a huge fan of CAD, but i thought this would be a fun project nonetheless! ive started off with the guide, and… i kinda understand whats going on? i have definitely learned from it though, like pcb routing and how to use kicad, a CAD software i have never heard of until now. im excited on how this journey will go, and all of the knowledge i will learn about CAD!"}]...
|
Title: hackpad! by @marygoat | Stardance
Devlogs: Title: hackpad! by @marygoat | Stardance
Devlogs:
hackpad! started off the hackpad mission, which has interested me since the beginning but kinda scared me since im not a huge fan of CAD, but i thought this would be a fun project nonetheless! ive started off with the guide, and… i kinda understand whats going on? i have definitely learned from it though, like pcb routing and how to use kicad, a CAD software i have never heard of until now. im excited on how this journey will go, and all of the knowledge i will learn about CAD!
HACKPAD! DEVLOG: #2 making the case okay . . . it took me an EMBARRASSING long amount of time to figure out how to make the plates. . . id insert the plate and then it’d be oriented some different shape, and that took me HOURS to figure out. i actually dropped the project cause i was just so confused, but i tried another plate and it . . . worked better. it was finally in the right orientation! i had to manually adjust it, but i got it eventually! i got the basic case done now, and now i gotta go onto the firmware! now that i got things done, im pretty proud that i figured this out! ive been wanting to do this mission for a while, so coming back to it and not giving up completely is sweet!...
|
1793206064.2757387
|
1793810864.2757387
|
|
7909
|
hackpad!! by @Enterro | Stardance
|
Enterro
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad!! by @Enterro | Stardance
|
1792925426.8304353
|
1793789426.8304353
|
|
65588
|
hackpad!!!! by @notfix133 | Stardance
|
notfix133
|
0
|
3.38
|
0
|
[]
|
[{"post_id": 73621, "ts": "202 [{"post_id": 73621, "ts": "2026-09-25T14:31:05Z", "hours": 2.0819, "text": "made the pcb and done with the routing. this really took a lot of time"}, {"post_id": 73544, "ts": "2026-09-25T11:05:07Z", "hours": 1.2986, "text": "Learnt kicad from basics and made the schematic!!!! used orpheuspad as an example but its is similar"}]...
|
Title: hackpad!!!! by @notfix133 | Stardance
Devl Title: hackpad!!!! by @notfix133 | Stardance
Devlogs:
Learnt kicad from basics and made the schematic!!!! used orpheuspad as an example but its is similar
made the pcb and done with the routing. this really took a lot of time...
|
1793703075.30728
|
1794307875.30728
|
|
64936
|
hackpad-pro by @TheDoctor19 | Stardance
|
TheDoctor19
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad-pro by @TheDoctor19 | Stardance
|
1793681506.1815016
|
1794286306.1815016
|
|
57043
|
hackpad-test by @matthiaslubbertsen | Stardance
|
matthiaslubbertsen
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: hackpad-test by @matthiaslubbertsen | Stard Title: hackpad-test by @matthiaslubbertsen | Stardance...
|
1793411716.0992172
|
1794016516.0992172
|
|
5539
|
hackpad-v5 by @ichewradon | Stardance
|
ichewradon
|
0
|
5.51
|
0
|
[]
|
[{"post_id": 22737, "ts": "202 [{"post_id": 22737, "ts": "2026-07-05T09:58:25Z", "hours": 5.5067, "text": "What I Built Custom 12-key macropad with rotary encoder, RGB LEDs, USB-C, and 3D printed case. PCB Designed in KiCad 2-layer board Key matrix routed Encoder + RGB integrated Ground plane added USB-C power + data routed Case Designed in Fusion 360 Cutouts for USB-C + encoder PCB mounting points Firmware QMK firmware Keymap configured Encoder controls volume/media RGB lighting enabled"}]...
|
Title: hackpad-v5 by @ichewradon | Stardance
Devl Title: hackpad-v5 by @ichewradon | Stardance
Devlogs:
What I Built Custom 12-key macropad with rotary encoder, RGB LEDs, USB-C, and 3D printed case. PCB Designed in KiCad 2-layer board Key matrix routed Encoder + RGB integrated Ground plane added USB-C power + data routed Case Designed in Fusion 360 Cutouts for USB-C + encoder PCB mounting points Firmware QMK firmware Keymap configured Encoder controls volume/media RGB lighting enabled...
|
1793400734.5368075
|
1794005534.5368075
|
|
61675
|
hackpad.. by @Miasma | Stardance
|
Miasma
|
0
|
1.95
|
0
|
[]
|
[{"post_id": 68183, "ts": "202 [{"post_id": 68183, "ts": "2026-09-14T17:42:13Z", "hours": 1.4878, "text": "Finally finished creating the case. My head kinda hurts lol"}, {"post_id": 67560, "ts": "2026-09-13T18:14:39Z", "hours": 0.4592, "text": "First time using Kicad, It was fun learning what to do from the hackpad guide, I could only build slowly due to hectic academic works. I am going to design the Case for this generic pad in Fusion 360 next time!"}]...
|
Title: hackpad.. by @Miasma | Stardance
Devlogs:
Title: hackpad.. by @Miasma | Stardance
Devlogs:
First time using Kicad, It was fun learning what to do from the hackpad guide, I could only build slowly due to hectic academic works. I am going to design the Case for this generic pad in Fusion 360 next time!
Finally finished creating the case. My head kinda hurts lol...
|
1793649295.2813244
|
1794254095.2813244
|