|
69763
|
My awesome macropad! by @dyangkwon | Stardance
|
dyangkwon
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @dyangkwon | Starda Title: My awesome macropad! by @dyangkwon | Stardance...
|
1792857364.457772
|
1793462164.457772
|
|
69764
|
Flight Controller by @reyansh_saindane | Stardance
|
reyansh_saindane
|
0
|
11.34
|
0
|
[]
|
[{"post_id": 82115, "ts": "202 [{"post_id": 82115, "ts": "2026-10-23T23:15:11Z", "hours": 2.105, "text": "Started Wiring MCU I started on the MCU wiring, including adding in the buttons and crystals needed for it. I also added in the jst connecters for the ESC and camera (I decided to add it in)."}, {"post_id": 81655, "ts": "2026-10-21T22:29:02Z", "hours": 1.6125, "text": "Connected MCU I connected the MCU to all of my peripherals, not wired yet though. I decided to only use one DIO pin from LoRa, I might use more later but for now only 1. Now, I have to wire this in KiCad along with the remaining few components."}, {"post_id": 80775, "ts": "2026-10-18T19:05:10Z", "hours": 1.1106, "text": "Wired GPS I finished wiring the GPS component, including adding in a connection for an active antenna, which the GPS needs. Next, I will either wire the MCU or LoRa module. I still have to figure out weather I want this to be able to use a camera."}, {"post_id": 80732, "ts": "2026-10-18T17:15:28Z", "hours": 1.1161, "text": "Finished wiring MicroSD and Magnetometer I finished wiring two more important components of the flight controller. Now, it’s time to work on the bigger components like GPS, LoRa, and MCU."}, {"post_id": 80447, "ts": "2026-10-17T17:24:55Z", "hours": 1.2597, "text": "Finished wiring more components I finally finished all of the power components with the wiring of the 3.3V buck. I also started out on wiring the sensors by wiring the barometer and IMU. Next, I’ll finish wiring all of the sensors and wok a little bit on LoRa and GPS."}, {"post_id": 80285, "ts": "2026-10-17T03:43:42Z", "hours": 1.0483, "text": "Finished wiring 5V buck-boost I finished the wiring for the next part, which is the 5V buck-boost. I also added in the correct parts for the inductors because they needed different models."}, {"post_id": 80006, "ts": "2026-10-15T23:02:06Z", "hours": 1.3125, "text": "Finished wiring I finished the wiring for the battery charger and I completed my research on ESC’s and how to integrate them into my current design. Next, I will wire the remaining components as fast as possible because I want to move on."}, {"post_id": 79675, "ts": "2026-10-15T01:10:41Z", "hours": 1.7739, "text": "First steps I started out on planning the flight controller, I got the basic parts but I still need to plan out the whole architecture a little bit more. I also started out wiring a few of the parts."}]...
|
Title: Flight Controller by @reyansh_saindane | St Title: Flight Controller by @reyansh_saindane | Stardance
Devlogs:
First steps I started out on planning the flight controller, I got the basic parts but I still need to plan out the whole architecture a little bit more. I also started out wiring a few of the parts.
Finished wiring I finished the wiring for the battery charger and I completed my research on ESC’s and how to integrate them into my current design. Next, I will wire the remaining components as fast as possible because I want to move on.
Finished wiring 5V buck-boost I finished the wiring for the next part, which is the 5V buck-boost. I also added in the correct parts for the inductors because they needed different models.
Finished wiring more components I finally finished all of the power components with the wiring of the 3.3V buck. I also started out on wiring the sensors by wiring the barometer and IMU. Next, I’ll finish wiring all of the sensors and wok a little bit on LoRa and GPS.
Finished wiring MicroSD and Magnetometer I finished wiring two more important components of the flight controller. Now, it’s time to work on the bigger components like GPS, LoRa, and MCU.
Wired GPS I finished wiring the GPS component, including adding in a connection for an active antenna, which the GPS needs. Next, I will either wire the MCU or LoRa module. I still have to figure out weather I want this to be able to use a camera.
Connected MCU I connected the MCU to all of my peripherals, not wired yet though. I decided to only use one DIO pin from LoRa, I might use more later but for now only 1. Now, I have to wire this in KiCad along with the remaining few components.
Started Wiring MCU I started on the MCU wiring, including adding in the buttons and crystals needed for it. I also added in the jst connecters for the ESC and camera (I decided to add it in)....
|
1792857365.3303962
|
1793462165.3303962
|
|
69765
|
Star Mania by @ankitparida_124 | Stardance
|
ankitparida_124
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Star Mania by @ankitparida_124 | Stardance
|
1792857366.4708972
|
1793462166.4708972
|
|
69766
|
website by @tijeshudit | Stardance
|
tijeshudit
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: website by @tijeshudit | Stardance
|
1792857369.6925619
|
1793462169.6925619
|
|
69767
|
CivicMatchmaker by @simonhacker | Stardance
|
simonhacker
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: CivicMatchmaker by @simonhacker | Stardance
|
1792857372.3165064
|
1793462172.3165064
|
|
69768
|
WarioWare Game by @bhwlan113 | Stardance
|
bhwlan113
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: WarioWare Game by @bhwlan113 | Stardance
|
1792857373.1827953
|
1793462173.1827953
|
|
69769
|
My own site! by @gabeAndThe8thBit | Stardance
|
gabeAndThe8thBit
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My own site! by @gabeAndThe8thBit | Stardan Title: My own site! by @gabeAndThe8thBit | Stardance...
|
1792857374.0302477
|
1793462174.0302477
|
|
69770
|
Python by @syedakhter | Stardance
|
syedakhter
|
1
|
2.0
|
1
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-15T02:13:57Z", "hours": 2.0, "multiplier": 1.0, "payout": 1, "blessing": "neutral", "text": "I made a website about python it tells you about python why its important python features and diffrent versions of python", "repo": "https://github.com/8051987-eng/Python", "demo": "https://8051987-eng.github.io/Python/"}]...
|
[{"post_id": 79688, "ts": "202 [{"post_id": 79688, "ts": "2026-10-15T02:12:43Z", "hours": 2.0147, "text": "I made a website about python"}]...
|
Title: Python by @syedakhter | Stardance
Devlogs: Title: Python by @syedakhter | Stardance
Devlogs:
I made a website about python
Ships:
I made a website about python it tells you about python why its important python features and diffrent versions of python...
|
1793127198.9469802
|
1793213598.9469802
|
|
69771
|
My own site! by @amoghpathak | Stardance
|
amoghpathak
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My own site! by @amoghpathak | Stardance
|
1792857374.8659425
|
1793462174.8659425
|
|
69772
|
My own site! by @26632 | Stardance
|
26632
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My own site! by @26632 | Stardance
|
1792857375.7246807
|
1793462175.7246807
|
|
69773
|
BLARE by @sanskriti08 | Stardance
|
sanskriti08
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: BLARE by @sanskriti08 | Stardance
|
1792857376.559879
|
1793462176.559879
|
|
69774
|
Cyber Deck by @DCoder | Stardance
|
DCoder
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Cyber Deck by @DCoder | Stardance
|
1792857377.425458
|
1793721377.425458
|
|
69775
|
Take Two by @DCoder | Stardance
|
DCoder
|
0
|
0.31
|
0
|
[]
|
[{"post_id": 79787, "ts": "202 [{"post_id": 79787, "ts": "2026-10-15T12:30:12Z", "hours": 0.3075, "text": "Today, I just built the schematics for Take Two. Pretty simple stuff, just a bunch of wires, a SEEEDUINO, and some switched. Not much really. Hopefully, I will make the PCB and the Case soon, cuz I got less time."}]...
|
Title: Take Two by @DCoder | Stardance
Devlogs:
T Title: Take Two by @DCoder | Stardance
Devlogs:
Today, I just built the schematics for Take Two. Pretty simple stuff, just a bunch of wires, a SEEEDUINO, and some switched. Not much really. Hopefully, I will make the PCB and the Case soon, cuz I got less time....
|
1792857378.2581677
|
1793462178.2581677
|
|
69776
|
Wet or Warm by @Jazil | Stardance
|
Jazil
|
1
|
2.0
|
0
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-15T02:46:39Z", "hours": 2.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "I made a weather app using api i know this is basic but this help me to study using api with getting by class", "repo": "https://github.com/JazilJafar/Weather-Finder", "demo": "https://jaziljafar.github.io/Weather-Finder/"}]...
|
[{"post_id": 79693, "ts": "202 [{"post_id": 79693, "ts": "2026-10-15T02:44:51Z", "hours": 2.3792, "text": "I made a weather getting app using api v1.0 is live https://jaziljafar.github.io/Weather-Finder/"}]...
|
Title: Wet or Warm by @Jazil | Stardance
Devlogs: Title: Wet or Warm by @Jazil | Stardance
Devlogs:
I made a weather getting app using api v1.0 is live https://jaziljafar.github.io/Weather-Finder/
Ships:
I made a weather app using api i know this is basic but this help me to study using api with getting by class...
|
1793134404.0766468
|
1793220804.0766468
|
|
69777
|
My Personal Webstie by @sanskriti08 | Stardance
|
sanskriti08
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My Personal Webstie by @sanskriti08 | Stard Title: My Personal Webstie by @sanskriti08 | Stardance...
|
1792857379.1308203
|
1793462179.1308203
|
|
69778
|
My first slack bot! by @zevi | Stardance
|
zevi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @zevi | Stardance
|
1792857379.996627
|
1793462179.996627
|
|
69779
|
Untitled project by @satyam_1902 | Stardance
|
satyam_1902
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @satyam_1902 | Stardanc Title: Untitled project by @satyam_1902 | Stardance...
|
1792857380.8542557
|
1793462180.8542557
|
|
69780
|
My awesome macropad! by @the_kunxl_ | Stardance
|
the_kunxl_
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @the_kunxl_ | Stard Title: My awesome macropad! by @the_kunxl_ | Stardance...
|
1792857382.9982367
|
1793462182.9982367
|
|
69781
|
My awesome macropad! by @kiranchimkar2007 | Starda My awesome macropad! by @kiranchimkar2007 | Stardance...
|
kiranchimkar2007
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @kiranchimkar2007 | Title: My awesome macropad! by @kiranchimkar2007 | Stardance...
|
1792857384.2985036
|
1793462184.2985036
|
|
69782
|
Untitled project by @aarush_setty | Stardance
|
aarush_setty
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @aarush_setty | Stardan Title: Untitled project by @aarush_setty | Stardance...
|
1792860453.19981
|
1793465253.19981
|
|
69783
|
Game website by @raspi | Stardance
|
raspi
|
0
|
2.67
|
0
|
[]
|
[{"post_id": 79843, "ts": "202 [{"post_id": 79843, "ts": "2026-10-15T16:26:51Z", "hours": 2.665, "text": "Website cleanup, me and my friend had semi built this website a while back and so i deided to clean it up, fix its errors and post it here, currently fixed the background errors and game mechanics issus"}]...
|
Title: Game website by @raspi | Stardance
Devlogs Title: Game website by @raspi | Stardance
Devlogs:
Website cleanup, me and my friend had semi built this website a while back and so i deided to clean it up, fix its errors and post it here, currently fixed the background errors and game mechanics issus...
|
1792860454.059729
|
1793465254.059729
|
|
69784
|
Crochet stitch identifier by @Coconutzrule | Stard Crochet stitch identifier by @Coconutzrule | Stardance...
|
Coconutzrule
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Crochet stitch identifier by @Coconutzrule Title: Crochet stitch identifier by @Coconutzrule | Stardance...
|
1792860454.9137492
|
1793465254.9137492
|
|
69785
|
Da best personal website by @Coconutzrule | Starda Da best personal website by @Coconutzrule | Stardance...
|
Coconutzrule
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Da best personal website by @Coconutzrule | Title: Da best personal website by @Coconutzrule | Stardance...
|
1792860455.7987797
|
1793465255.7987797
|
|
69786
|
smiski hackpad by @chlocolatess | Stardance
|
chlocolatess
|
0
|
0.87
|
0
|
[]
|
[{"post_id": 80094, "ts": "202 [{"post_id": 80094, "ts": "2026-10-16T06:29:26Z", "hours": 0.8689, "text": "my initial goal with this project was to create a cute hackpad that is smiski themed! with the hackpad tutorial, i was guided through on the schematics, pcb design, and the cad. although for NOW i am simply following the tutorial, i plan to add additional components and parts to this project!"}]...
|
Title: smiski hackpad by @chlocolatess | Stardance Title: smiski hackpad by @chlocolatess | Stardance
Devlogs:
my initial goal with this project was to create a cute hackpad that is smiski themed! with the hackpad tutorial, i was guided through on the schematics, pcb design, and the cad. although for NOW i am simply following the tutorial, i plan to add additional components and parts to this project!...
|
1792860456.6375413
|
1793465256.6375413
|
|
69787
|
My awesome macropad! by @Astralrogue | Stardance
|
Astralrogue
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Astralrogue | Star Title: My awesome macropad! by @Astralrogue | Stardance...
|
1792860457.5147352
|
1793465257.5147352
|
|
69788
|
BLARE by @suryashekharrai01106 | Stardance
|
suryashekharrai01106
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: BLARE by @suryashekharrai01106 | Stardance
|
1792860458.3911335
|
1793465258.3911335
|
|
69789
|
gugugaga by @bobverylong | Stardance
|
bobverylong
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: gugugaga by @bobverylong | Stardance
|
1792860459.3049123
|
1793465259.3049123
|
|
69790
|
ayoo by @Mad_Magnetar | Stardance
|
Mad_Magnetar
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: ayoo by @Mad_Magnetar | Stardance
|
1792860460.1570945
|
1793465260.1570945
|
|
69791
|
https://prepos4.netlify.app/ by @princepatel | Sta https://prepos4.netlify.app/ by @princepatel | Stardance...
|
princepatel
|
1
|
0.0
|
0
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-17T15:16:15Z", "hours": 0.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "I built Prep OS, an AI-powered study workspace and syllabus tracker designed specifically for Class 12th science and competitive exam preparation across Physics, Chemistry, and Mathematics. To solve the problem of ineffective revision, I built an Error Log AI System that uses the Google Gemini API to analyze mock test mistakes, categorize error types (conceptual, calculation, or misreading), and generate targeted practice tasks. I also created an AI Schedule Maker that calculates remaining syllabus requirements and generates personalized, time-blocked daily timetables using active recall and spaced repetition. The biggest challenge was structuring Gemini API prompts to parse speech/text mistake inputs into clean JSON outputs and managing automated deployments on Render via GitHub. I am proud of creating a comprehensive tool that turns test mistakes into actionable study plans. Anyone testing the live site on Render can update chapter completion bars, log recent test mistakes into the Error Log AI to receive automated revision strategies, and run the AI Schedule Maker to generate a personalized timetable. What was challenging? Integrating the Google Gemini API to reliably power both the Error Log analysis and dynamic schedule generation was challenging. It required crafting precise prompt structures to convert speech/text inputs into actionable study insights, as well as managing deployment on Render with seamless GitHub backend integration. What are you proud of? I am proud of building a unified study workspace that goes beyond basic progress bars. Combining automated mistake analysis with smart timetable generation creates a practical, high-value tool that directly optimizes real-world exam prep workflows. What should people know so they can test your project? Users can visit the deployed app on Render to test all core modules: track subject/chapter progress, input recent test errors into the Error Log AI for targeted review suggestions, and use the AI Schedule Maker to generate a personalized daily study routine.", "repo": "https://github.com/prince12xo/nasa", "demo": "https://prepos4.netlify.app/"}]...
|
[{"post_id": 79728, "ts": "202 [{"post_id": 79728, "ts": "2026-10-15T07:20:37Z", "hours": 0.4303, "text": "“A mission-critical web OS engineered with dynamic syllabus tracking, countdown telemetry, focus tools, and client-side AI diagnostics for astronaut cadets and STEM aspirants.”"}]...
|
Title: https://prepos4.netlify.app/ by @princepate Title: https://prepos4.netlify.app/ by @princepatel | Stardance
Devlogs:
“A mission-critical web OS engineered with dynamic syllabus tracking, countdown telemetry, focus tools, and client-side AI diagnostics for astronaut cadets and STEM aspirants.”
Ships:
I built Prep OS, an AI-powered study workspace and syllabus tracker designed specifically for Class 12th science and competitive exam preparation across Physics, Chemistry, and Mathematics. To solve the problem of ineffective revision, I built an Error Log AI System that uses the Google Gemini API to analyze mock test mistakes, categorize error types (conceptual, calculation, or misreading), and generate targeted practice tasks. I also created an AI Schedule Maker that calculates remaining syllabus requirements and generates personalized, time-blocked daily timetables using active recall and spaced repetition. The biggest challenge was structuring Gemini API prompts to parse speech/text mistake inputs into clean JSON outputs and managing automated deployments on Render via GitHub. I am proud of creating a comprehensive tool that turns test mistakes into actionable study plans. Anyone testing the live site on Render can update chapter completion bars, log recent test mistakes into the Error Log AI to receive automated revision strategies, and run the AI Schedule Maker to generate a personalized timetable. What was challenging? Integrating the Google Gemini API to reliably power both the Error Log analysis and dynamic schedule generation was challenging. It required crafting precise prompt structures to convert speech/text inputs into actionable study insights, as well as managing deployment on Render with seamless GitHub backend integration. What are you proud of? I am proud of building a unified study workspace that goes beyond basic progress bars. Combining automated mistake analysis with smart timetable generation creates a practical, high-value tool that directly optimizes real-world exam prep workflows. What should people know so they can test your project? Users can visit the deployed app on Render to test all core modules: track subject/chapter progress, input recent test errors into the Error Log AI for targeted review suggestions, and use the AI Schedule Maker to generate a personalized daily study routine....
|
1793008356.76098
|
1793094756.76098
|
|
69792
|
RFL by @wnxvra011 | Stardance
|
wnxvra011
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: RFL by @wnxvra011 | Stardance
|
1792860462.153363
|
1793724462.153363
|
|
69793
|
my APOD site by @Zx_Ai | Stardance
|
Zx_Ai
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: my APOD site by @Zx_Ai | Stardance
|
1792860462.977596
|
1793465262.977596
|
|
69794
|
Something by @Christianlikes67 | Stardance
|
Christianlikes67
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Something by @Christianlikes67 | Stardance
|
1792860463.832506
|
1793465263.832506
|
|
69795
|
ProtPilot by @madushankarajapaksha999 | Stardance
|
madushankarajapaksha999
|
0
|
8.55
|
0
|
[]
|
[{"post_id": 82234, "ts": "202 [{"post_id": 82234, "ts": "2026-10-24T11:01:22Z", "hours": 1.5772, "text": "Today, I worked on the Saved Projects page. I designed the project cards with a layouts inspired by Python IDEs, including project names, local paths, running status, memory usage, CPU load, and security information. I also added the search bar, register new project button, menu icons, and stop buttons. Most of the UI was designed by me using the same styles as the previous pages. For the circular resource indicators, I found a reference online and used a similar design. The project information is still dummy data for now, so the resource values and controls are not connected to real processes yet."}, {"post_id": 80665, "ts": "2026-10-18T13:12:37Z", "hours": 1.6608, "text": "Today!, I worked on the Active Ports page. While building it, I realiz that I could reuse the existing sidebar component instead of creating a new one just for this page.I connected the sidebar navigation using Next.js routing, so clicking on Active Ports now takes me to its own page. I also reused the existing dashboard styles and UI elements for the table instead of redesigning everything from scratch. For now, I ve added dummy data to display port numbers, protocols, process names, PIDs, local addresses, uptime, and connection status. I also added a search field, TCP/UDP filters, and action icons to make the page feel more complete. The Active Ports page is now in place."}, {"post_id": 80171, "ts": "2026-10-16T15:26:28Z", "hours": 3.2597, "text": "Today, I finished building the main dashboard UI using Next.js and Tailwind CSS. I added summary cards, an Active Sockets table, and a Saved Projects section. I used Lucide React icons and dummy data to make the dashboard look more realistic. The UI is coming together nicely, and next I want to connect it to the backend to display real data from my PC."}, {"post_id": 79766, "ts": "2026-10-15T09:48:03Z", "hours": 1.0514, "text": "I started working on the UI. First, I created a design idea for the app. Then, I decided on the sidebar feature’s and start implementing the sidebar using Tailwind CSS. I also installed Lucide React and added icons to make the navigations look better. The basic sidebar UI is now done, and next I want to work on the main dashboard."}, {"post_id": 79724, "ts": "2026-10-15T07:02:20Z", "hours": 1.0033, "text": "I spent my first hour researching how Next.js and Electron work together. I set up the project, installed shadcn/ui and Electron, and explored different way s to turn PortPilot into a Windows .exe app. I haven’t started buildiing the main features yet, but I now have a clearer ideas of how to move forward."}]...
|
Title: ProtPilot by @madushankarajapaksha999 | Sta Title: ProtPilot by @madushankarajapaksha999 | Stardance
Devlogs:
I spent my first hour researching how Next.js and Electron work together. I set up the project, installed shadcn/ui and Electron, and explored different way s to turn PortPilot into a Windows .exe app. I haven’t started buildiing the main features yet, but I now have a clearer ideas of how to move forward.
I started working on the UI. First, I created a design idea for the app. Then, I decided on the sidebar feature’s and start implementing the sidebar using Tailwind CSS. I also installed Lucide React and added icons to make the navigations look better. The basic sidebar UI is now done, and next I want to work on the main dashboard.
Today, I finished building the main dashboard UI using Next.js and Tailwind CSS. I added summary cards, an Active Sockets table, and a Saved Projects section. I used Lucide React icons and dummy data to make the dashboard look more realistic. The UI is coming together nicely, and next I want to connect it to the backend to display real data from my PC.
Today!, I worked on the Active Ports page. While building it, I realiz that I could reuse the existing sidebar component instead of creating a new one just for this page.I connected the sidebar navigation using Next.js routing, so clicking on Active Ports now takes me to its own page. I also reused the existing dashboard styles and UI elements for the table instead of redesigning everything from scratch. For now, I ve added dummy data to display port numbers, protocols, process names, PIDs, local addresses, uptime, and connection status. I also added a search field, TCP/UDP filters, and action icons to make the page feel more complete. The Active Ports page is now in place.
Today, I worked on the Saved Projects page. I designed the project cards with a layouts inspired by Python IDEs, including project names, local paths, running status, memory usage, CPU load, and security information. I also added the search bar, register new project button, menu icons, and stop buttons. Most of the UI was designed by me using the same styles as the previous pages. For the circular resource indicators, I found a reference online and used a similar design. The project information is still dummy data for now, so the resource values and controls are not connected to real processes yet....
|
1792860464.6961102
|
1793465264.6961102
|
|
69796
|
Obliterator - Antweight Battle Bot by @Haiiitsme | Obliterator - Antweight Battle Bot by @Haiiitsme | Stardance...
|
Haiiitsme
|
0
|
8.53
|
0
|
[]
|
[{"post_id": 81754, "ts": "202 [{"post_id": 81754, "ts": "2026-10-22T11:25:59Z", "hours": 0.6061, "text": "Bristless!! I added some very spiky and long bristles to the back of my bot, to add a thick line of defense behind the bot, to protect it from hard hits while remaining extremely light, unlike a solid extention. Screw Switch A slot for the screw switch was also added, so i can turn the bot on and off from the outside, and ensuring that the switch cant accidentally be switched off in a battle. Thanks it! Pretty short Devlog, but thank you for reading! Hope you’re as excited for this build as i am! Hopefully it gets approved quickly as well!"}, {"post_id": 81437, "ts": "2026-10-21T09:11:51Z", "hours": 7.9256, "text": "First Devlog! New Project This is my new project, a 150g Antweight cobat robot with a flat body, an aggressive design, and a large horizontal weapon spinning at speeds of 25,000 rpm. This is in succession to Cat-aclysm, my prior combat robot, from which i learnt a lot and implemented into this one! Idea Most parts of this robot contrast Cataclysm, since i wanted to make something completely different, and also to fix all the features that malfunctioned or did not perform well in Cataclysm. A major feature that went very wrong in Cataclysm was its weapon blade, which kept on shattering on impact. This time, i ensured the blade would have a uniform spread of the pressure, and would not shatter instantly upon a hit. Designing The Weapon I began with designing the weapon blade on Fusion, and unfortunately forgot to track it. With lots of help from a friend, who thouroughly explained exactly how to design a perfect weapon blade using his helpful diagrams, which ive attached below! CADing the main components Next i imported all electronics and the weapon blade into a common Onshape document and lay them out where i saw fit. Then i made a rough sketch around them and built up. I added a hollow compartment to hold electronics, designed thick weapon struts, and quickly replaceable wheel guards. The wheels will be 3D printed this time, with O rings for extra grip. Plan for future If i have weight left from my 150g limit, i will be adding bristles to the back of the bot, since it was a very effective strategy used by Makers muse, which he has given permission to me to use. Thank you! Thank you for reading this devlog, it was pretty long, and i hope you enjoyed! I will be building this bot as soon as i get funding!"}]...
|
Title: Obliterator - Antweight Battle Bot by @Haii Title: Obliterator - Antweight Battle Bot by @Haiiitsme | Stardance
Devlogs:
First Devlog! New Project This is my new project, a 150g Antweight cobat robot with a flat body, an aggressive design, and a large horizontal weapon spinning at speeds of 25,000 rpm. This is in succession to Cat-aclysm, my prior combat robot, from which i learnt a lot and implemented into this one! Idea Most parts of this robot contrast Cataclysm, since i wanted to make something completely different, and also to fix all the features that malfunctioned or did not perform well in Cataclysm. A major feature that went very wrong in Cataclysm was its weapon blade, which kept on shattering on impact. This time, i ensured the blade would have a uniform spread of the pressure, and would not shatter instantly upon a hit. Designing The Weapon I began with designing the weapon blade on Fusion, and unfortunately forgot to track it. With lots of help from a friend, who thouroughly explained exactly how to design a perfect weapon blade using his helpful diagrams, which ive attached below! CADing the main components Next i imported all electronics and the weapon blade into a common Onshape document and lay them out where i saw fit. Then i made a rough sketch around them and built up. I added a hollow compartment to hold electronics, designed thick weapon struts, and quickly replaceable wheel guards. The wheels will be 3D printed this time, with O rings for extra grip. Plan for future If i have weight left from my 150g limit, i will be adding bristles to the back of the bot, since it was a very effective strategy used by Makers muse, which he has given permission to me to use. Thank you! Thank you for reading this devlog, it was pretty long, and i hope you enjoyed! I will be building this bot as soon as i get funding!
Bristless!! I added some very spiky and long bristles to the back of my bot, to add a thick line of defense behind the bot, to protect it from hard hits while remaining extremely light, unlike a solid extention. Screw Switch A slot for the screw switch was also added, so i can turn the bot on and off from the outside, and ensuring that the switch cant accidentally be switched off in a battle. Thanks it! Pretty short Devlog, but thank you for reading! Hope you’re as excited for this build as i am! Hopefully it gets approved quickly as well!...
|
1792860465.5572307
|
1793465265.5572307
|
|
69797
|
Aphanes by @Eclipse | Stardance
|
Eclipse
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Aphanes by @Eclipse | Stardance
|
1792860466.4091969
|
1793724466.4091969
|
|
69798
|
My very own WebOS by @msaadshahid2007 | Stardance
|
msaadshahid2007
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My very own WebOS by @msaadshahid2007 | Sta Title: My very own WebOS by @msaadshahid2007 | Stardance...
|
1792860467.2277858
|
1793465267.2277858
|
|
69799
|
RC MINE DETECTOR by @princepatel | Stardance
|
princepatel
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: RC MINE DETECTOR by @princepatel | Stardanc Title: RC MINE DETECTOR by @princepatel | Stardance...
|
1792860468.091006
|
1793465268.091006
|
|
69800
|
My own site! by @Bartox | Stardance
|
Bartox
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My own site! by @Bartox | Stardance
|
1792860468.9227116
|
1793465268.9227116
|
|
69801
|
Mah Websight by @Astralrogue | Stardance
|
Astralrogue
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Mah Websight by @Astralrogue | Stardance
|
1792860469.786824
|
1793465269.786824
|
|
69802
|
MOSFET ALU by @purpletue | Stardance
|
purpletue
|
0
|
0.5
|
0
|
[]
|
[{"post_id": 79737, "ts": "202 [{"post_id": 79737, "ts": "2026-10-15T08:15:20Z", "hours": 0.5, "text": "Just finished the main board for the ALU. 2 sets of 5 bits of input, 5 bits + carry bit for output. it’s modular, so each operation has to be plugged into the header on the right."}]...
|
Title: MOSFET ALU by @purpletue | Stardance
Devlo Title: MOSFET ALU by @purpletue | Stardance
Devlogs:
Just finished the main board for the ALU. 2 sets of 5 bits of input, 5 bits + carry bit for output. it’s modular, so each operation has to be plugged into the header on the right....
|
1792860470.6352286
|
1793465270.6352286
|
|
69803
|
my APOD site by @nadav_babad | Stardance
|
nadav_babad
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: my APOD site by @nadav_babad | Stardance
|
1792860472.3303869
|
1793465272.3303869
|
|
69804
|
My own site! by @Vansh_Verma | Stardance
|
Vansh_Verma
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My own site! by @Vansh_Verma | Stardance
|
1792860473.2001112
|
1793465273.2001112
|
|
69805
|
My awesome macropad! by @seiafunayama | Stardance
|
seiafunayama
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @seiafunayama | Sta Title: My awesome macropad! by @seiafunayama | Stardance...
|
1792860474.0614898
|
1793465274.0614898
|
|
69806
|
Synth by @Himikle09 | Stardance
|
Himikle09
|
0
|
10.99
|
0
|
[]
|
[{"post_id": 81425, "ts": "202 [{"post_id": 81425, "ts": "2026-10-21T07:10:58Z", "hours": 4.1392, "text": "Completed pcb for the synth!"}, {"post_id": 81253, "ts": "2026-10-20T14:05:10Z", "hours": 4.0839, "text": "Further PCB/schematic designing. Footprints uploaded and now I just need to rearrange for the final PCB layout."}, {"post_id": 79842, "ts": "2026-10-15T16:26:15Z", "hours": 1.4472, "text": "making it physically. testing and looking for improvements."}, {"post_id": 79762, "ts": "2026-10-15T09:23:40Z", "hours": 1.3172, "text": "Planning Circuitry layout"}]...
|
Title: Synth by @Himikle09 | Stardance
Devlogs:
P Title: Synth by @Himikle09 | Stardance
Devlogs:
Planning Circuitry layout
making it physically. testing and looking for improvements.
Further PCB/schematic designing. Footprints uploaded and now I just need to rearrange for the final PCB layout.
Completed pcb for the synth!...
|
1792860474.9082906
|
1793465274.9082906
|
|
69807
|
My Cool Blog by @Anmol_Ranjan | Stardance
|
Anmol_Ranjan
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My Cool Blog by @Anmol_Ranjan | Stardance
|
1792860475.7892554
|
1793465275.7892554
|
|
69808
|
the nothing tab by @seiafunayama | Stardance
|
seiafunayama
|
1
|
2.0
|
0
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-19T00:42:03Z", "hours": 2.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "im pretty proud of the design as a whole, I think I was able to replicate the aesthetic quite well", "repo": "https://github.com/seia00/nothingtab", "demo": "https://nothingtab.vercel.app"}]...
|
[{"post_id": 80071, "ts": "202 [{"post_id": 80071, "ts": "2026-10-16T04:47:40Z", "hours": 1.6525, "text": "FIRST DEVLOG, introducing the nothingtab1"}]...
|
Title: the nothing tab by @seiafunayama | Stardanc Title: the nothing tab by @seiafunayama | Stardance
Devlogs:
FIRST DEVLOG, introducing the nothingtab1
Ships:
im pretty proud of the design as a whole, I think I was able to replicate the aesthetic quite well...
|
1793008358.5498178
|
1793094758.5498178
|
|
69809
|
MY FIRST SITE by @Anmol_Ranjan | Stardance
|
Anmol_Ranjan
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: MY FIRST SITE by @Anmol_Ranjan | Stardance
|
1792860477.8830287
|
1793465277.8830287
|
|
69810
|
notgreg.space by @geg | Stardance
|
geg
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: notgreg.space by @geg | Stardance
|
1792860482.080776
|
1793465282.080776
|
|
69811
|
pickupthecall by @adicoding-js | Stardance
|
adicoding-js
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: pickupthecall by @adicoding-js | Stardance
|
1792860482.934659
|
1793465282.934659
|
|
69812
|
Bump by @soyuz_dev | Stardance
|
soyuz_dev
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Bump by @soyuz_dev | Stardance
|
1792860483.8248968
|
1793465283.8248968
|