|
3201
|
Untitled project by @baguette | Stardance
|
baguette
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @baguette | Stardance
|
1792670020.128387
|
1793274820.128387
|
|
3202
|
Use of Predicted Onshore Winds to Increase Autonom Use of Predicted Onshore Winds to Increase Autonomous Water Quality Drone Battery Efficiency in Barnegat Bay by @Krupam | Stardance...
|
Krupam
|
0
|
42.24
|
0
|
[]
|
[{"post_id": 42354, "ts": "202 [{"post_id": 42354, "ts": "2026-08-07T01:09:07Z", "hours": 10.7703, "text": "PARTS!!! and coding…AND ASSEMBLY!!! Oh Oh Boy have I had a lot of fun haha. Overall I started assembling my parts, more unboxing, but I also started testing individual components with the picos. I took the code I had created already and modified it in seperate files to only test one sensor at a time. I have had a jolly good time. I did most of my work over laspe so take a look! My Lapse Account Soldering I was unable to get this on camera but I did most of y soldering for the MicroSD card. It was my first time but fairly simple, I just connected a few Dupont connectors into the holes in the board (for lack of a more technical term). I still have more soldering to do but I will try to get it on camera next time! Pico Troubles I have never used a microcontroller before so this was a crazy thing to try and learn. I spent a lot of time trying to mess around with libraries and find them on the internet. Battery Drivers The UPS that I have for the Pico has drivers and a program along it to collect battery info…but it only works on actual linux. It connects through I2C however, so I just reverse engineered it for the pico! I am still working on it however. (I also spent like 2 hours trying to figure out my own diagram and plug the MicroSD card board in…)"}, {"post_id": 29231, "ts": "2026-07-16T00:36:06Z", "hours": 3.0167, "text": "PARTS!!! Hey guys! Long time no see. I have been waiting on parts but I finally got them! (All but the LoRa Radio but it is on it’s way. Parts I got: Raspberry Pi Pico 2x 18650 3200 mAh batteries (Have to send these back cause they sent the wrong type 😭) NEO-6M GPS Module DS18B20 Temperature Sensor 4.33” x 2.36” 5V 200mA Solar Panels x4 Waveshare DS3231 RTC Pico UPS (Uninterruptible Power Supply) DC5521 Male cable Solar Panel Charging Module TP4056 Micro USB to USB -C1N5819 Schottky Diodes -MicroSD Card Module MicroSd Card x2 I am missing the Waveshare SX1262 LoRa Node Module. I can start building everything else in the meantime and start testing out code. If you guys would like links to my parts, either leave a comment or wait until I update the github. Here are some photos, I was too busy being excited and taking inventory to get any 😅."}, {"post_id": 20366, "ts": "2026-07-01T23:06:05Z", "hours": 7.4953, "text": "Weather Underground Scraper Hola! I swear I’m not going insane… What is this? Weather Underground is a place to get very local and high detailed weather data. It is a network of 250,000+ personal weather stations (PWS) used to map weather world wide. In my previous project, I used weather underground stations in my local area of Barnegat Bay. Most of them actually came from the non-proffit Save Barnegat Bay’s Mesonet of stations. Huge shoutout to them and Dr. Michael Folmer, “a dedicated meteorologist and forecaster for the NWS Ocean Prediction Center, Weather Prediction Center, Tropical Analysis, and the Forecast Branch of the National Hurricane Center.” This year I will continue using data from their mesonet Soooo why are you scraping It is a bit of a sore topic for me, but Weather Underground discontinued their public API a few years back. This led me to collecting EVERY. SINGLE. DATA POINT by hand. I typed them all up in a spread sheet. All 40,000+ of them. Lovely. This year I do not plan on wasting that much time and instead I created a webscraper using the beautifulsoup and requests libraries (as well as some others) Features? Uses a config file for the list of weather station ids, API key for the PostgreSQL website, and error catching variables Scans HTML of the weather stations and picks out the data (for all variables not just what I need. This makes it so you can use it as well) Converts all imperial measurements into metric timestamps in UTC for the API to then turn back into ETC Send it to the API Future: This scraper will run every hour to collect the data from the weather stations. Scraping will begin once the buoy has started collecting data as well. PostgreSQL Update: Added another SQL table for the Weather Underground data Added functions for it Links: As much as clowned on Weather Underground, they are a great place to get weather data: https://www.wunderground.com/ Link to the scraper repo:"}, {"post_id": 19313, "ts": "2026-06-30T16:15:09Z", "hours": 5.3267, "text": "PostgreSQL API Backend for Buoy Hey guys! Let me tell you what I have been up to: PostgreSQL: PostgreSQL is an back-end database that will hold the data collected from the buoy. In the future it will also hold data collected from local Weather Underground weather stations using web scraping. API Backend: A FastAPI back-end was coded in python (running in my home lab) to use a PostgreSQL server running on a separate Raspberry Pi 5. My homelab may or may not be at 95% storage used ;-; Functions Ability to use HTTP commands (most) to send, delete, and view data. Communication with the PostgreSQL database Use of a “api-key” to only allow the buoy to POST data"}, {"post_id": 17827, "ts": "2026-06-28T19:16:47Z", "hours": 1.8083, "text": "Back-end for Buoy API Today I started working on the FastAPI backend for the buoy to send data using HTTP POST…FastAPI doesn’t really like me that much. It took a while lmao."}, {"post_id": 17017, "ts": "2026-06-27T16:57:51Z", "hours": 1.8014, "text": "Buoy! Plan This buoy will be built with: Raspberry Pi Pico 2x 18650 3200 mAh batteries NEO-6M GPS Module DS18B20 Temperature Sensor 4.33” x 2.36” 5V 200mA Solar Panels x4 Waveshare SX1262 LoRa Node Module x2 Waveshare DS3231 RTC Pico UPS (Uninterruptible Power Supply) DC5521 Male cable Solar Panel Charging Module TP4056 Micro USB to USB-C 1N5819 Schottky Diodes MicroSD Card Module MicroSd Card x2 Function: The buoy will be anchored right next to a marina where every hour, it will colect the water temperature (among other parameters), record the data to a local SD card, and send the data over LoRa to the reveiver pico at the marina to send the data over WiFI to a API on my homelab server. The website to predict wind speed will pull the latest weather points from weather stations nearby as well as these buoy points to predict the wind speed based on the approach choosen (which model) Buoy Hardware Plan Every hour, the Pico is reset by the real-time clock module (RTC) to restart the program. Upon restart, the program will set the next wake-up alarm and note the data collection number. Water temperature, GPS data, buoy temperature, sequence, (data collection number), and battery voltage will be collected. The data is then saved to an onboard MicroSD card before being sent by LoRa radio at 915 MHz (North America Standard) The buoy will be put in a plastic mooring buoy. All electronics will be in an IP68 (or greater) rated box with epoxied holes for wires inside of the buoy. The top of the buoy will be sliced at the seam with a 3D printed replacement (Brightly colored) that is flat and has slots on the inside for the solar panels to attach. A LoRa antenna will come out the top. It is epoxied close with a designed opening latch using gaskets on the top to provide access in case of emergency. Water Temperature Probe will come out of a drilled hole in the bottom of the buoy and be epoxied close. Local Township Dive Team Logo will be put on the buoy to deter anyone from interacting with it. Code status: Most of the buoy and receiver code is coded, however it is untested as parts haven’t arrived yet. Parts? (WHEN): I am still waiting on parts ;-; Once I receive them I will be able to assemble the parts and start testing my code. Then, I will 3D design a top case to go on top of the buoy"}, {"post_id": 9617, "ts": "2026-06-16T00:43:43Z", "hours": 4.875, "text": "Hi! Time to do a proper introduction: Sorry I do not enjoy logging a lot, in fact thats why my github readme’s are done last and take weeks haha! But seriously. What is this long title all about? Well my name is Krupam and this is my passion. Wind. Specially Onshore winds. Onshore winds are also known as a “sea breeze”. They are winds that come from the ocean to the land. Caused by a temperature gradient by the land and the sea. Land heats up a lot faster than water, further increasing this gradient, leading to more onshore winds. They pose a dangerous threat to small watercrafts especially on the bay (lagoonal estuary) where I live. They provide a threat to boaters, tourists, passengers, or any one on the water. In fact, local boaters have become so attuned to their dangers, that they will intentionally go out of their way to avoid them. However, these winds are almost impossible to predict. Big weather forecasts, such as the National Weather Service (NWS) and National Oceanic and Atmospheric Administration (NOAA) can’t predict these winds on a local small level. Thus I set out on a mission to predict these winds myself using machine learning, mathematical models, and gathering my own data using local weather stations, buoys, and local boaters. Last year I was able to get accuracy down to 0.5 mph for wind speeds, ~1.0 mph for gusts, around 26° off for wind direction, and ~13% off for if it is an onshore wind or not. This project is running at https://wind.krupamlab.com on my homelab. You can take a look at the old project at https://github.com/Krupamc/Research-2026-LSTM . The project also has python as well as a .exe version available through the releases tab on GitHub. This project: Now that’s a lot to take in, but I’m going to make it so much worse haha! Now these systems are cool and all, but they could get so much more accurate. I want month by month representation for the entire year; not just the summer months. A huge part of science, especially data science, is that data has to be available throughout the entire year. I have personal experience with this. One of the buoys I was using to collect data; switched off without any indication. This really limited my project and I will be fixing this problem head one. I want to have predictions that are accurate for the safety of these boaters. But to make it more interesting this year, I will be using several machine learning (like LSTM), mathematical models (like Linear Regression, wind formulas, probalisitc models (e.g. 80% of winds above 10 mph), as well as compare against the NWS models. Then depending on which one of these approaches is most energy efficient and accurate, I will expand that approach to cover other weather parameters and be used as a input for a AI model to determine where a water drone should go in my bay to increase battery efficiency. Now what the hell is this drone I can hear you ask? Well I am cooperating with a local underwater search and rescue team that is creating a water drone that will go on the bay and collect water and weather quality parameters. This drone will be autonomous and creating this model will allow it to increase power efficiently. My Buoy Buddy - MBB Last year, one of the public buoys I depended on suddenly went offline and wiped out a huge chunk of my training data. It made my realize that having control to reliable data is crucial. Many organizations collect this data but do not share. If I really wanted to protect boaters out on the bay, I would need a way to procure my own data. That’s why I am building the MBB or the My Buoy Buddy. MBB is a small, low-power buoy that floats in the bay and logs, water temperature and more! This data is sent to my homelab to predict. I want to sell this pre-made buoy to wind-based boaters (even nationaly!) together that will combine with my open-source program to create local predictions running on their own hardware."}, {"post_id": 3936, "ts": "2026-06-07T02:06:19Z", "hours": 4.9364, "text": "I have done a lot of work… Hi! My name is Krupam and this is the first post I will be making for this project. This is a documentation of my research project of using different type of prediction algorithms and approaches for Onshore winds on the coast. This is a continuation of my previous research project at https://github.com/Krupamc/Research-2026-LSTM . Throughout my time so far I have, coded a lot of stuff, spent a lot of time in the terminal, and cried a bit haha!"}, {"post_id": 480, "ts": "2026-06-01T22:52:28Z", "hours": 2.2089, "text": "Worked on the paper documentation"}]...
|
Title: Use of Predicted Onshore Winds to Increase Title: Use of Predicted Onshore Winds to Increase Autonomous Water Quality Drone Battery Efficiency in Barnegat Bay by @Krupam | Stardance
Devlogs:
Worked on the paper documentation
I have done a lot of work… Hi! My name is Krupam and this is the first post I will be making for this project. This is a documentation of my research project of using different type of prediction algorithms and approaches for Onshore winds on the coast. This is a continuation of my previous research project at https://github.com/Krupamc/Research-2026-LSTM . Throughout my time so far I have, coded a lot of stuff, spent a lot of time in the terminal, and cried a bit haha!
Hi! Time to do a proper introduction: Sorry I do not enjoy logging a lot, in fact thats why my github readme’s are done last and take weeks haha! But seriously. What is this long title all about? Well my name is Krupam and this is my passion. Wind. Specially Onshore winds. Onshore winds are also known as a “sea breeze”. They are winds that come from the ocean to the land. Caused by a temperature gradient by the land and the sea. Land heats up a lot faster than water, further increasing this gradient, leading to more onshore winds. They pose a dangerous threat to small watercrafts especially on the bay (lagoonal estuary) where I live. They provide a threat to boaters, tourists, passengers, or any one on the water. In fact, local boaters have become so attuned to their dangers, that they will intentionally go out of their way to avoid them. However, these winds are almost impossible to predict. Big weather forecasts, such as the National Weather Service (NWS) and National Oceanic and Atmospheric Administration (NOAA) can’t predict these winds on a local small level. Thus I set out on a mission to predict these winds myself using machine learning, mathematical models, and gathering my own data using local weather stations, buoys, and local boaters. Last year I was able to get accuracy down to 0.5 mph for wind speeds, ~1.0 mph for gusts, around 26° off for wind direction, and ~13% off for if it is an onshore wind or not. This project is running at https://wind.krupamlab.com on my homelab. You can take a look at the old project at https://github.com/Krupamc/Research-2026-LSTM . The project also has python as well as a .exe version available through the releases tab on GitHub. This project: Now that’s a lot to take in, but I’m going to make it so much worse haha! Now these systems are cool and all, but they could get so much more accurate. I want month by month representation for the entire year; not just the summer months. A huge part of science, especially data science, is that data has to be available throughout the entire year. I have personal experience with this. One of the buoys I was using to collect data; switched off without any indication. This really limited my project and I will be fixing this problem head one. I want to have predictions that are accurate for the safety of these boaters. But to make it more interesting this year, I will be using several machine learning (like LSTM), mathematical models (like Linear Regression, wind formulas, probalisitc models (e.g. 80% of winds above 10 mph), as well as compare against the NWS models. Then depending on which one of these approaches is most energy efficient and accurate, I will expand that approach to cover other weather parameters and be used as a input for a AI model to determine where a water drone should go in my bay to increase battery efficiency. Now what the hell is this drone I can hear you ask? Well I am cooperating with a local underwater search and rescue team that is creating a water drone that will go on the bay and collect water and weather quality parameters. This drone will be autonomous and creating this model will allow it to increase power efficiently. My Buoy Buddy - MBB Last year, one of the public buoys I depended on suddenly went offline and wiped out a huge chunk of my training data. It made my realize that having control to reliable data is crucial. Many organizations collect this data but do not share. If I really wanted to protect boaters out on the bay, I would need a way to procure my own data. That’s why I am building the MBB or the My Buoy Buddy. MBB is a small, low-power buoy that floats in the bay and logs, water temperature and more! This data is sent to my homelab to predict. I want to sell this pre-made buoy to wind-based boaters (even nationaly!) together that will combine with my open-source program to create local predictions running on their own hardware.
Buoy! Plan This buoy will be built with: Raspberry Pi Pico 2x 18650 3200 mAh batteries NEO-6M GPS Module DS18B20 Temperature Sensor 4.33” x 2.36” 5V 200mA Solar Panels x4 Waveshare SX1262 LoRa Node Module x2 Waveshare DS3231 RTC Pico UPS (Uninterruptible Power Supply) DC5521 Male cable Solar Panel Charging Module TP4056 Micro USB to USB-C 1N5819 Schottky Diodes MicroSD Card Module MicroSd Card x2 Function: The buoy will be anchored right next to a marina where every hour, it will colect the water temperature (among other parameters), record the data to a local SD card, and send the data over LoRa to the reveiver pico at the marina to send the data over WiFI to a API on my homelab server. The website to predict wind speed will pull the latest weather points from weather stations nearby as well as these buoy points to predict the wind speed based on the approach choosen (which model) Buoy Hardware Plan Every hour, the Pico is reset by the real-time clock module (RTC) to restart the program. Upon restart, the program will set the next wake-up alarm and note the data collection number. Water temperature, GPS data, buoy temperature, sequence, (data collection number), and battery voltage will be collected. The data is then saved to an onboard MicroSD card before being sent by LoRa radio at 915 MHz (North America Standard) The buoy will be put in a plastic mooring buoy. All electronics will be in an IP68 (or greater) rated box with epoxied holes for wires inside of the buoy. The top of the buoy will be sliced at the seam with a 3D printed replacement (Brightly colored) that is flat and has slots on the inside for the solar panels to attach. A LoRa antenna will come out the top. It is epoxied close with a designed opening latch using gaskets on the top to provide access in case of emergency. Water Temperature Probe will come out of a drilled hole in the bottom of the buoy and be epoxied close. Local Township Dive Team Logo will be put on the buoy to deter anyone from interacting with it. Code status: Most of the buoy and receiver code is coded, however it is untested as parts haven’t arrived yet. Parts? (WHEN): I am still waiting on parts ;-; Once I receive them I will be able to assemble the parts and start testing my code. Then, I will 3D design a top case to go on top of the buoy
Back-end for Buoy API Today I started working on the FastAPI backend for the buoy to send data using HTTP POST…FastAPI doesn’t really like me that much. It took a while lmao.
PostgreSQL API Backend for Buoy Hey guys! Let me tell you what I have been up to: PostgreSQL: PostgreSQL is an back-end database that will hold the data collected from the buoy. In the future it will also hold data collected from local Weather Underground weather stations using web scraping. API Backend: A FastAPI back-end was coded in python (running in my home lab) to use a PostgreSQL server running on a separate Raspberry Pi 5. My homelab may or may not be at 95% storage used ;-; Functions Ability to use HTTP commands (most) to send, delete, and view data. Communication with the PostgreSQL database Use of a “api-key” to only allow the buoy to POST data
Weather Underground Scraper Hola! I swear I’m not going insane… What is this? Weather Underground is a place to get very local and high detailed weather data. It is a network of 250,000+ personal weather stations (PWS) used to map weather world wide. In my previous project, I used weather underground stations in my local area of Barnegat Bay. Most of them actually came from the non-proffit Save Barnegat Bay’s Mesonet of stations. Huge shoutout to them and Dr. Michael Folmer, “a dedicated meteorologist and forecaster for the NWS Ocean Prediction Center, Weather Prediction Center, Tropical Analysis, and the Forecast Branch of the National Hurricane Center.” This year I will continue using data from their mesonet Soooo why are you scraping It is a bit of a sore topic for me, but Weather Underground discontinued their public API a few years back. This led me to collecting EVERY. SINGLE. DATA POINT by hand. I typed them all up in a spread sheet. All 40,000+ of them. Lovely. This year I do not plan on wasting that much time and instead I created a webscraper using the beautifulsoup and requests libraries (as well as some others) Features? Uses a config file for the list of weather station ids, API key for the PostgreSQL website, and error catching variables Scans HTML of the weather stations and picks out the data (for all variables not just what I need. This makes it so you can use it as well) Converts all imperial measurements into metric timestamps in UTC for the API to then turn back into ETC Send it to the API Future: This scraper will run every hour to collect the data from the weather stations. Scraping will begin once the buoy has started collecting data as well. PostgreSQL Update: Added another SQL table for the Weather Underground data Added functions for it Links: As much as clowned on Weather Underground, they are a great place to get weather data: https://www.wunderground.com/ Link to the scraper repo:
PARTS!!! Hey guys! Long time no see. I have been waiting on parts but I finally got them! (All but the LoRa Radio but it is on it’s way. Parts I got: Raspberry Pi Pico 2x 18650 3200 mAh batteries (Have to send these back cause they sent the wrong type 😭) NEO-6M GPS Module DS18B20 Temperature Sensor 4.33” x 2.36” 5V 200mA Solar Panels x4 Waveshare DS3231 RTC Pico UPS (Uninterruptible Power Supply) DC5521 Male cable Solar Panel Charging Module TP4056 Micro USB to USB -C1N5819 Schottky Diodes -MicroSD Card Module MicroSd Card x2 I am missing the Waveshare SX1262 LoRa Node Module. I can start building everything else in the meantime and start testing out code. If you guys would like links to my parts, either leave a comment or wait until I update the github. Here are some photos, I was too busy being excited and taking inventory to get any 😅.
PARTS!!! and coding…AND ASSEMBLY!!! Oh Oh Boy have I had a lot of fun haha. Overall I started assembling my parts, more unboxing, but I also started testing individual components with the picos. I took the code I had created already and modified it in seperate files to only test one sensor at a time. I have had a jolly good time. I did most of my work over laspe so take a look! My Lapse Account Soldering I was unable to get this on camera but I did most of y soldering for the MicroSD card. It was my first time but fairly simple, I just connected a few Dupont connectors into the holes in the board (for lack of a more technical term). I still have more soldering to do but I will try to get it on camera next time! Pico Troubles I have never used a microcontroller before so this was a crazy thing to try and learn. I spent a lot of time trying to mess around with libraries and find them on the internet. Battery Drivers The UPS that I have for the Pico has drivers and a program along it to collect battery info…but it only works on actual linux. It connects through I2C however, so I just reverse engineered it for the pico! I am still working on it however. (I also spent like 2 hours trying to figure out my own diagram and plug the MicroSD card board in…)...
|
1792749076.0251052
|
1793353876.0251052
|
|
3203
|
My awesome macropad! by @bgold2050 | Stardance
|
bgold2050
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @bgold2050 | Starda Title: My awesome macropad! by @bgold2050 | Stardance...
|
1792655426.253942
|
1793260226.253942
|
|
3204
|
My first slack bot! by @Abdelrhman_Metwally | Star My first slack bot! by @Abdelrhman_Metwally | Stardance...
|
Abdelrhman_Metwally
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Abdelrhman_Metwally Title: My first slack bot! by @Abdelrhman_Metwally | Stardance...
|
1792586986.5123696
|
1793191786.5123696
|
|
3205
|
Robot dog by @atharvan_tamilarasu | Stardance
|
atharvan_tamilarasu
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Robot dog by @atharvan_tamilarasu | Stardan Title: Robot dog by @atharvan_tamilarasu | Stardance...
|
1792507710.1927059
|
1793112510.1927059
|
|
3206
|
Hey by @Sid | Stardance
|
Sid
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Hey by @Sid | Stardance
|
1792932700.1607614
|
1793796700.1607614
|
|
3207
|
test by @paul_sopin | Stardance
|
paul_sopin
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: test by @paul_sopin | Stardance
|
1792799350.266346
|
1793404150.266346
|
|
3208
|
The tuffest slack bot by @reyansh | Stardance
|
reyansh
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: The tuffest slack bot by @reyansh | Stardan Title: The tuffest slack bot by @reyansh | Stardance...
|
1792486365.6043665
|
1793091165.6043665
|
|
3209
|
My first slack bot! by @Rishil | Stardance
|
Rishil
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Rishil | Stardance
|
1792709596.8520317
|
1793314396.8520317
|
|
3210
|
autonomous weed killing agriculture robot by @hetp autonomous weed killing agriculture robot by @hetpatel | Stardance...
|
hetpatel
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: autonomous weed killing agriculture robot b Title: autonomous weed killing agriculture robot by @hetpatel | Stardance...
|
1792741791.2559752
|
1793346591.2559752
|
|
3211
|
Atlas Hydro by @alexisfilion | Stardance
|
alexisfilion
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Atlas Hydro by @alexisfilion | Stardance
|
1792601552.4619348
|
1793206352.4619348
|
|
3212
|
Google Docs AI Formatter by @heroiclamp3038 | Star Google Docs AI Formatter by @heroiclamp3038 | Stardance...
|
heroiclamp3038
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Google Docs AI Formatter by @heroiclamp3038 Title: Google Docs AI Formatter by @heroiclamp3038 | Stardance...
|
1792712950.897255
|
1793317750.897255
|
|
3213
|
NULL
|
NULL
|
0
|
0.0
|
0
|
[]
|
[]
|
|
1792936037.0684404
|
1793800037.0684404
|
|
3214
|
My awesome macropad! by @iyuvraj03 | Stardance
|
iyuvraj03
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @iyuvraj03 | Starda Title: My awesome macropad! by @iyuvraj03 | Stardance...
|
1792608488.0514085
|
1793213288.0514085
|
|
3215
|
Larptop by @space | Stardance
|
space
|
0
|
7.41
|
0
|
[]
|
[{"post_id": 25629, "ts": "202 [{"post_id": 25629, "ts": "2026-07-10T01:08:09Z", "hours": 3.7428, "text": "Since My last update I have finished a Significant amount of the case except the bottom since i still need to measure and recreate the motherboard so i can make sure it sits well within the final case. The case is inspired my older IBM thinkpad cases and Ive used the revuing 41 pcb layout for this case but slightly modified I will be using Kailh Deep Sea Silent Mini switches and I’m still looking for nice low profile keycaps. On the right the two black circles represent left and right click buttons the smaller circle at the bottom is where I want to place a 3ds joystick, the small rectangle is where i want to add a scroll wheel. This strange design is based of my own hand measurements and I designed this to be a more comfortable trackpad substitute. I’m not sure if it will be comfortable but I’m willing to try and i think it would be fun. This part of the build will be controlled by an Arduino pro micro and will be connected to the motherboard via usbc cord, as will the keyboard."}, {"post_id": 18144, "ts": "2026-06-29T05:00:44Z", "hours": 3.3044, "text": "I am currently working on the case’s top panel where the keyboard will rest i found a nice mechanical keyboard pcb design on ergogen and modified it slightly in kicad to fit the low profile switches I wanted to use + mounting holes. I also designed a mounting solution for this keyboard based off flurples mechanical keyboard design. I started working on where and how i would mount the screen and hinges; decided to work with framework 13 hinges since they have readily available cad which makes the process of designing around them significantly easier. I also started working on where i will be mounting the screen this part might take longer than i want because hinge mounts tend to be fragile when designed incorrectly."}, {"post_id": 16505, "ts": "2026-06-26T21:08:42Z", "hours": 0.3669, "text": "Currently building the bottom of my laptop case though i need to restart because i put the mounting holes on the bottom of the case and i want them to be on the top of my case also i am still learning how to use the shell feature on onshape though i think it will be very useful later in this project. Unfortunately the ThinkPad I’m working around is not at my house yet so i couldn’t do much without the proper measurements so my timelapse unfortunately does not have much to show today. I have been working on saving my old vaio from becoming ewaste by upgrading its ram, ssd and adding a sketchy but surprisingly efficient heatsink to its exterior. Unfortunately i got too ambitious and tried to add an egpu setup to this laptop via mini PCIE dock +adapter but i accidently fried something inside my motherboard so the laptop can only turn on when plugged in, I will now be turning it into a slabtop and give it to my sister once i finish because she does not have a desktop."}]...
|
Title: Larptop by @space | Stardance
Devlogs:
Cur Title: Larptop by @space | Stardance
Devlogs:
Currently building the bottom of my laptop case though i need to restart because i put the mounting holes on the bottom of the case and i want them to be on the top of my case also i am still learning how to use the shell feature on onshape though i think it will be very useful later in this project. Unfortunately the ThinkPad I’m working around is not at my house yet so i couldn’t do much without the proper measurements so my timelapse unfortunately does not have much to show today. I have been working on saving my old vaio from becoming ewaste by upgrading its ram, ssd and adding a sketchy but surprisingly efficient heatsink to its exterior. Unfortunately i got too ambitious and tried to add an egpu setup to this laptop via mini PCIE dock +adapter but i accidently fried something inside my motherboard so the laptop can only turn on when plugged in, I will now be turning it into a slabtop and give it to my sister once i finish because she does not have a desktop.
I am currently working on the case’s top panel where the keyboard will rest i found a nice mechanical keyboard pcb design on ergogen and modified it slightly in kicad to fit the low profile switches I wanted to use + mounting holes. I also designed a mounting solution for this keyboard based off flurples mechanical keyboard design. I started working on where and how i would mount the screen and hinges; decided to work with framework 13 hinges since they have readily available cad which makes the process of designing around them significantly easier. I also started working on where i will be mounting the screen this part might take longer than i want because hinge mounts tend to be fragile when designed incorrectly.
Since My last update I have finished a Significant amount of the case except the bottom since i still need to measure and recreate the motherboard so i can make sure it sits well within the final case. The case is inspired my older IBM thinkpad cases and Ive used the revuing 41 pcb layout for this case but slightly modified I will be using Kailh Deep Sea Silent Mini switches and I’m still looking for nice low profile keycaps. On the right the two black circles represent left and right click buttons the smaller circle at the bottom is where I want to place a 3ds joystick, the small rectangle is where i want to add a scroll wheel. This strange design is based of my own hand measurements and I designed this to be a more comfortable trackpad substitute. I’m not sure if it will be comfortable but I’m willing to try and i think it would be fun. This part of the build will be controlled by an Arduino pro micro and will be connected to the motherboard via usbc cord, as will the keyboard....
|
1792695027.7896214
|
1793299827.7896214
|
|
3216
|
Cyberdeck by @schweter1231 | Stardance
|
schweter1231
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Cyberdeck by @schweter1231 | Stardance
|
1792788627.5569317
|
1793393427.5569317
|
|
3217
|
Untitled project by @KishoreR | Stardance
|
KishoreR
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @KishoreR | Stardance
|
1792691509.0990753
|
1793296309.0990753
|
|
3218
|
Untitled project by @Warden | Stardance
|
Warden
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @Warden | Stardance
|
1792619255.674471
|
1793224055.674471
|
|
3219
|
My first slack bot! by @kv | Stardance
|
kv
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @kv | Stardance
|
1792590693.939609
|
1793195493.939609
|
|
3220
|
A gaming pc by @DreTech | Stardance
|
DreTech
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: A gaming pc by @DreTech | Stardance
|
1792781429.2849383
|
1793386229.2849383
|
|
3221
|
My awesome macropad! by @kanishkv99 | Stardance
|
kanishkv99
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @kanishkv99 | Stard Title: My awesome macropad! by @kanishkv99 | Stardance...
|
1792734510.9331696
|
1793339310.9331696
|
|
3222
|
My first slack bot! by @romptl8 | Stardance
|
romptl8
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @romptl8 | Stardance
|
1792580045.377766
|
1793184845.377766
|
|
3223
|
Zypthive by @aaryan_vishnupurikar | Stardance
|
aaryan_vishnupurikar
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Zypthive by @aaryan_vishnupurikar | Stardan Title: Zypthive by @aaryan_vishnupurikar | Stardance...
|
1792687808.402398
|
1793292608.402398
|
|
3224
|
My awesome macropad! by @Provu | Stardance
|
Provu
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Provu | Stardance
|
1792532980.6273308
|
1793137780.6273308
|
|
3225
|
Untitled project by @Dreadful69 | Stardance
|
Dreadful69
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @Dreadful69 | Stardance
|
1792594352.7966108
|
1793199152.7966108
|
|
3226
|
Untitled by @KishoreR | Stardance
|
KishoreR
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @KishoreR | Stardance
|
1792572695.532753
|
1793177495.532753
|
|
3227
|
Untitled project by @kanishkv99 | Stardance
|
kanishkv99
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled project by @kanishkv99 | Stardance
|
1792695145.8648403
|
1793299945.8648403
|
|
3228
|
gnn pcna by @advay_awesomer | Stardance
|
advay_awesomer
|
1
|
16.0
|
188
|
[{"ship_num": 1, "ts": "2026-0 [{"ship_num": 1, "ts": "2026-06-22T20:17:45Z", "hours": 16.0, "multiplier": 18.82, "payout": 188, "blessing": "neutral", "text": "Made GNN-PCNA: a graph neural network that scores which residues on PCNA — a notoriously hard cancer drug target — are worth investigating as hidden (“cryptic”) pockets. It reads a protein as two graphs at once (3D contacts + backbone chain) and fuses them with a learned attention gate — a GATv2 design the standard baseline (PocketMiner) doesn’t use. Hardest part wasn’t the model — it was catching homology leakage in my own data. My first benchmark looked great until I ran MMseqs2 and found near-identical proteins (99% identity!) sitting across the train/test split. So I deleted my own headline numbers and rebuilt everything on a clean 30%-homology split. The honest score came out lower — and that’s the whole point. Proud of: it’s engineered to not overclaim. Every output is framed as “hypothesis generation,” an automated verifier catches my own mistakes, and an ablation proves how much comes from sequence vs. structure. To test it: open the demo, pick a PCNA structure (try 8GLA or 1W60), and watch it score every residue in ~2s with a 3D viewer + heatmap. Heads-up: the live demo runs the lightweight model; the headline AUPRC/AUROC come from a heavier ESM2 model (too big to host free). Full story in the repo’s DEVLOG.", "repo": "https://github.com/advaycode/gnnpcna", "demo": "https://advaycode.github.io/gnnpcna/"}]...
|
[{"post_id": 13820, "ts": "202 [{"post_id": 13820, "ts": "2026-06-22T17:19:21Z", "hours": 15.8911, "text": "first making a memory base for the gnn"}]...
|
Title: gnn pcna by @advay_awesomer | Stardance
De Title: gnn pcna by @advay_awesomer | Stardance
Devlogs:
first making a memory base for the gnn
Ships:
Made GNN-PCNA: a graph neural network that scores which residues on PCNA — a notoriously hard cancer drug target — are worth investigating as hidden (“cryptic”) pockets. It reads a protein as two graphs at once (3D contacts + backbone chain) and fuses them with a learned attention gate — a GATv2 design the standard baseline (PocketMiner) doesn’t use. Hardest part wasn’t the model — it was catching homology leakage in my own data. My first benchmark looked great until I ran MMseqs2 and found near-identical proteins (99% identity!) sitting across the train/test split. So I deleted my own headline numbers and rebuilt everything on a clean 30%-homology split. The honest score came out lower — and that’s the whole point. Proud of: it’s engineered to not overclaim. Every output is framed as “hypothesis generation,” an automated verifier catches my own mistakes, and an ablation proves how much comes from sequence vs. structure. To test it: open the demo, pick a PCNA structure (try 8GLA or 1W60), and watch it score every residue in ~2s with a 3D viewer + heatmap. Heads-up: the live demo runs the lightweight model; the headline AUPRC/AUROC come from a heavier ESM2 model (too big to host free). Full story in the repo’s DEVLOG....
|
1792982977.555013
|
1793069377.555013
|
|
3229
|
Robot that can rev by @rshoa001 | Stardance
|
rshoa001
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Robot that can rev by @rshoa001 | Stardance
|
1792637680.0636454
|
1793242480.0636454
|
|
3230
|
My awesome macropad! by @finnu050 | Stardance
|
finnu050
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @finnu050 | Stardan Title: My awesome macropad! by @finnu050 | Stardance...
|
1792554735.339008
|
1793159535.339008
|
|
3231
|
Rocket by @pratyush | Stardance
|
pratyush
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Rocket by @pratyush | Stardance
|
1792540098.5512116
|
1793144898.5512116
|
|
3232
|
My awesome macropad! by @rfarfan_dev | Stardance
|
rfarfan_dev
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @rfarfan_dev | Star Title: My awesome macropad! by @rfarfan_dev | Stardance...
|
1792666171.8367333
|
1793270971.8367333
|
|
3233
|
My awesome macropad! by @Olivia-Mackell | Stardanc My awesome macropad! by @Olivia-Mackell | Stardance...
|
Olivia-Mackell
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @Olivia-Mackell | S Title: My awesome macropad! by @Olivia-Mackell | Stardance...
|
1792641328.2209053
|
1793246128.2209053
|
|
3234
|
Daily SAT Word App by @camille_ananyi | Stardance
|
camille_ananyi
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Daily SAT Word App by @camille_ananyi | Sta Title: Daily SAT Word App by @camille_ananyi | Stardance...
|
1792518744.572418
|
1793123544.572418
|
|
3235
|
Miru by @ananya_iyer | Stardance
|
ananya_iyer
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Miru by @ananya_iyer | Stardance
|
1792543709.4460232
|
1793148509.4460232
|
|
3236
|
Apex Scholar by @Anvith | Stardance
|
Anvith
|
1
|
34.0
|
0
|
[{"ship_num": 1, "ts": "2026-1 [{"ship_num": 1, "ts": "2026-10-17T17:47:40Z", "hours": 34.0, "multiplier": null, "payout": 0, "blessing": "neutral", "text": "I made Apex Scholar, which is meant to help students self-learn AP subjects. I made this since I didn’t understand sometimes what my teacher was teaching, and I didn’t know how to self study. In Apex Scholar, there are AI tutors that are each trained on their respective Course & Exam Description, a practice hub where you can take practice tests, create flashcards, learn, review topics, and more, and also a scheduler, which schedules when you should study and do your homework. I would greatly appreciate any feedback!", "repo": "https://github.com/AnvithPothula/apex-scholar", "demo": "https://apex-scholar.com"}]...
|
[{"post_id": 80442, "ts": "202 [{"post_id": 80442, "ts": "2026-10-17T17:11:00Z", "hours": 6.3394, "text": "There were a few bugs throughout the website that I took care of. It is basically finished, though I might ship again after this ship if I add updated based on the feedback."}, {"post_id": 79400, "ts": "2026-10-13T20:16:43Z", "hours": 26.7125, "text": "I’ve done a lot of changes, mostly with adding a practice hub."}, {"post_id": 2897, "ts": "2026-06-05T20:03:06Z", "hours": 0.5667, "text": "I am starting to make a Learn section"}]...
|
Title: Apex Scholar by @Anvith | Stardance
Devlog Title: Apex Scholar by @Anvith | Stardance
Devlogs:
I am starting to make a Learn section
I’ve done a lot of changes, mostly with adding a practice hub.
There were a few bugs throughout the website that I took care of. It is basically finished, though I might ship again after this ship if I add updated based on the feedback.
Ships:
I made Apex Scholar, which is meant to help students self-learn AP subjects. I made this since I didn’t understand sometimes what my teacher was teaching, and I didn’t know how to self study. In Apex Scholar, there are AI tutors that are each trained on their respective Course & Exam Description, a practice hub where you can take practice tests, create flashcards, learn, review topics, and more, and also a scheduler, which schedules when you should study and do your homework. I would greatly appreciate any feedback!...
|
1793048018.2983444
|
1793134418.2983444
|
|
3237
|
My first slack bot! by @Americawizard | Stardance
|
Americawizard
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @Americawizard | Sta Title: My first slack bot! by @Americawizard | Stardance...
|
1792651640.804326
|
1793256440.804326
|
|
3238
|
Pebble by @johnaman | Stardance
|
johnaman
|
0
|
6.29
|
0
|
[]
|
[{"post_id": 72243, "ts": "202 [{"post_id": 72243, "ts": "2026-09-22T14:57:49Z", "hours": 1.045, "text": "Hey stardance family I think I realized a little too late that Pebble is a full fledged project that will DEFINITELY not be completed within the deadline for stardance, so I’m debating whether or not to keep it private or put it on forge or another ysws. I had to find another battery and charger to drive the servos,so hopefully I’ll be able to prototype soon! I’m still mocking up a simulator. IF anyone has recs for sims, lmk!"}, {"post_id": 67157, "ts": "2026-09-13T07:16:00Z", "hours": 0.4703, "text": "SUP KIDS I highkey didn’t do much today and not sure if I’ve lost my sticky streak or not sadge I did a little work on pebble, made hit connection so they aren’t just floating in space, added lower legs, but I still can’t decide on an ankle mechanism, especially because it’s a passive ankle… Any ideas welcome! Come to think of it, pebble seems like a crab… wide ahh"}, {"post_id": 65032, "ts": "2026-09-09T20:46:08Z", "hours": 1.4244, "text": "Hi kids :) Messed around with some hardware recently, and tested out the resistance of the servos. The #8-32 bolts fit in the servo holes, and hold it pretty well! Big issue though… I DONT HAVE NUTS FOR THE BOLTS qoq So, I guess I need to steal some nuts from robotics. oh well c’: more fun things on the way! Please ignore the image quality LMAO it was a screenshot of the lapse… and also the actual camera kinda sucks as well"}, {"post_id": 45946, "ts": "2026-08-12T19:15:37Z", "hours": 2.49, "text": "Hello stardance children :) I did a lot today! Got to figure things out for the hips and basic legs of Pebble. I gotta admit, it looks super cool. BUT, the challenge is, whether it will actually be sturdy or just crack as soon as I move the motors :( Speaking of which, I do still have to figure out the motor driver and learn how to balance this boy. Anyways, thanks for reading :)"}, {"post_id": 41628, "ts": "2026-08-05T23:12:40Z", "hours": 0.5167, "text": "Wsg gang ! Today, I worked on a basic sketch of pebble, kind of seeing how it would work. Also, some components came in today, so I’m gonna try to figure it out. Pretty proud of this mockup, so I hope to follow it closely :) If anyone has ideas on what to do with the head/face, lmk! I need ideas cuz I don’t want to directly copy NVIDIA’s Blue…"}, {"post_id": 38376, "ts": "2026-07-31T18:39:27Z", "hours": 0.3394, "text": "Today, I came up with a BOM and started putting together a parts list! I also realized I never updated my description… oops! Changed the project around just now to what the project actually is. I also started a basic sketch of what I want pebble to look like, inspired by NVIDIA’s Blue at GTC 2025. I hope to order things tonight, and hopefully they arrive soon!"}]...
|
Title: Pebble by @johnaman | Stardance
Devlogs:
T Title: Pebble by @johnaman | Stardance
Devlogs:
Today, I came up with a BOM and started putting together a parts list! I also realized I never updated my description… oops! Changed the project around just now to what the project actually is. I also started a basic sketch of what I want pebble to look like, inspired by NVIDIA’s Blue at GTC 2025. I hope to order things tonight, and hopefully they arrive soon!
Wsg gang ! Today, I worked on a basic sketch of pebble, kind of seeing how it would work. Also, some components came in today, so I’m gonna try to figure it out. Pretty proud of this mockup, so I hope to follow it closely :) If anyone has ideas on what to do with the head/face, lmk! I need ideas cuz I don’t want to directly copy NVIDIA’s Blue…
Hello stardance children :) I did a lot today! Got to figure things out for the hips and basic legs of Pebble. I gotta admit, it looks super cool. BUT, the challenge is, whether it will actually be sturdy or just crack as soon as I move the motors :( Speaking of which, I do still have to figure out the motor driver and learn how to balance this boy. Anyways, thanks for reading :)
Hi kids :) Messed around with some hardware recently, and tested out the resistance of the servos. The #8-32 bolts fit in the servo holes, and hold it pretty well! Big issue though… I DONT HAVE NUTS FOR THE BOLTS qoq So, I guess I need to steal some nuts from robotics. oh well c’: more fun things on the way! Please ignore the image quality LMAO it was a screenshot of the lapse… and also the actual camera kinda sucks as well
SUP KIDS I highkey didn’t do much today and not sure if I’ve lost my sticky streak or not sadge I did a little work on pebble, made hit connection so they aren’t just floating in space, added lower legs, but I still can’t decide on an ankle mechanism, especially because it’s a passive ankle… Any ideas welcome! Come to think of it, pebble seems like a crab… wide ahh
Hey stardance family I think I realized a little too late that Pebble is a full fledged project that will DEFINITELY not be completed within the deadline for stardance, so I’m debating whether or not to keep it private or put it on forge or another ysws. I had to find another battery and charger to drive the servos,so hopefully I’ll be able to prototype soon! I’m still mocking up a simulator. IF anyone has recs for sims, lmk!...
|
1792630162.5205142
|
1793234962.5205142
|
|
3239
|
Tresca by @JBGilliard | Stardance
|
JBGilliard
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Tresca by @JBGilliard | Stardance
|
1792615654.849271
|
1793220454.849271
|
|
3240
|
My first slack bot! by @joaopedropedrosodemenezes My first slack bot! by @joaopedropedrosodemenezes | Stardance...
|
joaopedropedrosodemenezes
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @joaopedropedrosodem Title: My first slack bot! by @joaopedropedrosodemenezes | Stardance...
|
1792745352.6225011
|
1793350152.6225011
|
|
3241
|
My first slack bot! by @rishisai_poola | Stardance
|
rishisai_poola
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @rishisai_poola | St Title: My first slack bot! by @rishisai_poola | Stardance...
|
1792637682.577164
|
1793242482.577164
|
|
3242
|
My awesome macropad! by @iyuvraj2330 | Stardance
|
iyuvraj2330
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @iyuvraj2330 | Star Title: My awesome macropad! by @iyuvraj2330 | Stardance...
|
1792579665.4794226
|
1793184465.4794226
|
|
3243
|
HackFangames by @FridkDEV | Stardance
|
FridkDEV
|
0
|
0.38
|
0
|
[]
|
[{"post_id": 1235, "ts": "2026 [{"post_id": 1235, "ts": "2026-06-03T02:47:50Z", "hours": 0.3806, "text": "It’s not much, but as my first project, I’ve made pretty good progress in HTML."}]...
|
Title: HackFangames by @FridkDEV | Stardance
Devl Title: HackFangames by @FridkDEV | Stardance
Devlogs:
It’s not much, but as my first project, I’ve made pretty good progress in HTML....
|
1792738301.007501
|
1793343101.007501
|
|
3244
|
My awesome macropad! by @NotALarp | Stardance
|
|
0
|
1.03
|
0
|
[]
|
[{"post_id": 43653, "ts": "202 [{"post_id": 43653, "ts": "2026-08-09T01:21:38Z", "hours": 1.0258, "text": "SPEEDRUNNING MY HACKPAD AS FAST AS PHYSICALLY POSSIBLE: I tried to speedrun my hackpad as fast as possible, I started with the schematic by placing everything down and connecting it as fast as humanly possible. Then I assigned the footprints quickly and moved onto the PCB, where I moved all the parts around and routed them together. The routing wasn’t difficult, just tedious. Then I moved on to the case. I did some research, and turns out there’s types of fillets in fusion, with G1 (tangent) being the default, where it turns/rounds the same across the entire curve, but there’s another called G2 (curvature) which actually turns/rounds more in the middle then the edges, and apple choose to use G2 because it looks more luxurious. Based on this, I’ll never use G1 again and will always be using G2 from now on. Anyways, I CADed the cause by importing all the parts first and then design the box around it (and yes, I used G2 fillets)."}]...
|
Title: My awesome macropad! by @NotALarp | Stardan Title: My awesome macropad! by @NotALarp | Stardance
Devlogs:
SPEEDRUNNING MY HACKPAD AS FAST AS PHYSICALLY POSSIBLE: I tried to speedrun my hackpad as fast as possible, I started with the schematic by placing everything down and connecting it as fast as humanly possible. Then I assigned the footprints quickly and moved onto the PCB, where I moved all the parts around and routed them together. The routing wasn’t difficult, just tedious. Then I moved on to the case. I did some research, and turns out there’s types of fillets in fusion, with G1 (tangent) being the default, where it turns/rounds the same across the entire curve, but there’s another called G2 (curvature) which actually turns/rounds more in the middle then the edges, and apple choose to use G2 because it looks more luxurious. Based on this, I’ll never use G1 again and will always be using G2 from now on. Anyways, I CADed the cause by importing all the parts first and then design the box around it (and yes, I used G2 fillets)....
|
1792914684.3766708
|
1793778684.3766708
|
|
3245
|
GROW-Bot | Garden Robot for Organic Work by @sukiw GROW-Bot | Garden Robot for Organic Work by @sukiwyatt | Stardance...
|
sukiwyatt
|
0
|
56.16
|
0
|
[]
|
[{"post_id": 35616, "ts": "202 [{"post_id": 35616, "ts": "2026-07-27T04:44:02Z", "hours": 4.4567, "text": "BOM Complete The BOM has been completed, I am now ready to submit for funding"}, {"post_id": 29960, "ts": "2026-07-17T05:31:33Z", "hours": 1.9208, "text": "BOM Part List Configuration I did the long and tedious Task of going through every single part in the project and give each one a custom name, description and product details. I did this because of onshapes built in BOM tool, so now it gives me a full list of needed parts and quantities. I edited the properties of over 300 parts to do this. FULL ROBOT If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot ."}, {"post_id": 29752, "ts": "2026-07-16T20:54:54Z", "hours": 3.1439, "text": "Electronics! Today I made an electronics box and modelled the spacing of the main electronic components. Electronics specifications: SBC: Raspberry Pi 5 (4GB) Motion controller: BTT Octopus Pro V1.1 (H723) Closed-loop drivers: StepperOnline CL57T V4.1 48V PSU: Meanwell SE-200-48 or similar Enclosure: Joinfworld Outdoor Electrical Box, 16x11x6 ABS Plastic The box is held up in the superstructure by four 3D prints and cable ties. FULL ROBOT Main Gantry + Electronics If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot ."}, {"post_id": 29291, "ts": "2026-07-16T03:18:38Z", "hours": 4.0022, "text": "Traversal X₁ Axis Motor Today I made the mount for the stepper motor that runs the belt for the x-axis What is the motor’s purpose? It will allow the robot to move up to 120 inches down the garden bed. It engages with a belt that pulls the robot down aluminum tubes to traverse the full length Technical details It uses a 1x1 aluminum tube with 1/8 inch walls to mount to the main turret plate and them it houses the motor, pully and idlers for the belt I also shifted the entire belt over to the left for a better motor fit. CAD: FULL ROBOT Turret Only If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot ."}, {"post_id": 28587, "ts": "2026-07-14T22:36:48Z", "hours": 6.9689, "text": "Large Design Updates! MOST OF THE CONTENT FOR THIS DEVLOG IS CONTAINED IN THE ATTATCHED EXPLANATION VIDEO TLDR: I lightened the main gantry structure and gussets in an FRC style in order to keep weight and inertia down. I built a custom configuration panel that allows the viewer to select through different configurations including the greenhouse, garden bed, ground, or crops I built a coordinate variable system in order to help me control all 7 axis of movement in the system individually. I added vegetation in the garden bed in order to better convey the purpose of the system. SEE FOR YOURSELF! If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot ."}, {"post_id": 22985, "ts": "2026-07-05T17:54:03Z", "hours": 3.4311, "text": "Belt Tensioner! Today I designed the belt tensioner for where the belts terminate on the gantry, it uses ratchets to tension pullies with the belt wrapped around them. I also designed the mounting piece for the wrist mechanism. CAD Links Turreted Gantry Main Assembly Core-XY Gantry GROW-BOT FULL If you want to stay involved in the making this project a reality, I recommend joining the slack channel #grow-bot to help out or ask questions."}, {"post_id": 21643, "ts": "2026-07-03T18:14:11Z", "hours": 4.4903, "text": "Core-XY Gantry System Complete! What is Core-XY? Core-XY is a popular belt-driven motion system commonly used in 3D printers and CNC machines. Instead of having one motor move the X-axis and another move the Y-axis independently, Core-XY uses two stationary motors that work together using a single, continuous loop of belt to move the toolhead diagonally, horizontally, or vertically. Details The Gantry hub is 3D printed out of PA6-CF Nylon for maximum strength, and it has many through bolts that support the bearings and pullies that double as rigitidy in the structure. There are bearings that ride on the large 2x2 aluminum tube that allow for side to side motion Other bearings ride on the smaller 1x1 aluminum tube that allows for up and down motion. The gantry was designed to be as light-weight as possible due to it riding to the far end of the cantilevered aluminum superstructure. How does the belt work? The best way to describe the shape of the belt is a plus symbol, since it goes from the left to the center to the top to the center then to the right ect. The belt is terminated and tensioned at the bottom of the 1x1 aluminum tube, this is what allows for all of the motion since the tube is effectively riding the belt. I don’t know if that makes any sense lol, but pretty much if the motors spin together it translates left and right, and if they spin in opposite directions, it will go up and down. CAD LINKS Main Gantry Assembly Core-XY Gantry TLA FULL ROBOT If you want to stay involved in the making this project a reality, I recommend joining the slack channel #grow-bot to help out or ask questions."}, {"post_id": 21181, "ts": "2026-07-03T00:08:06Z", "hours": 2.395, "text": "Core-XY Gearbox Today I built the gearbox component of the core-xy gantry system, I will send an update later today on the rest of the gantry. The top motor drives the far end of the gantry through a dead-axel gear and pully riding on a through hex axel. The bottom motor directly powers the through axel for the near side pully. CAD LINKS: Superstructure TLA (Includes gearbox) Full Robot Join the slack channel #grow-bot to keep up with development"}, {"post_id": 20499, "ts": "2026-07-02T03:17:38Z", "hours": 4.3475, "text": "I’m Back! (For real ) I have had to deal with some personal issues and illness over the course of the past few weeks, and was unable to work on the robot. However, I am officially back to making progress. Here is a list of miscellaneous improvements I have made since the last devlog But I am seriously sorry for not updating folks on the status for the past few weeks. 🤦 Turret Structure Since I designed the main gantry assembly, I added the actually turret to the frame that uses 10 bearing stacks on shoulder screws to rotate and a cnc machined aluminum azimuth gear to rotate. Superstructure Mounting I am going to mount the main superstructure to the turret using a 3/16” walled 2x2 aluminum box tube with quarter inch bolts spanning both the turret plates for extra stability, I am using two large gussets to mount the 2x2 box tubing for the superstructure to the turret box tube. Superstructure The superstructure is comprised of 2x2 box tubes and aluminum gussets, I only have the main frame designed, and am currently working on the core-xy linear gantry for the toolhead. Belt Tensioning I also designed a belt tensioning system for the main belt that allows the gantry to pull itself along the garden bed rails. RELEVANT CAD LINKS FULL CAD - GROW Bot (Greenhouse + Garden bed) Superstructure TLA Full Gantry Assembly (TURRET INCLUDED) I sincerely apologize for not keeping anyone following the progress of this project up to date with its happenings, but I promise to be better in the future To join the conversation around this project join the slack channel #grow-bot"}, {"post_id": 7687, "ts": "2026-06-12T20:43:57Z", "hours": 3.2783, "text": "Main Gantry Complete What does it do? The gantry is a frame that rolls on the aluminum tubing, it uses bogies to provide omnidirectional support (2 wheeled structures). How does it work? There are custom Urethane wheels on aluminum hubs that roll on the aluminum tubing, they are rotated 140 degrees from each other. The bogies attach to aluminum 6061 tube stock above it that forms the main superstructure for the turret to mount to. Interesting Technical Numbers 32 Bolts, 32 Lock nuts, 20 washers, 32 rivets 60 inches of 6061 2x1 aluminum box tubing 32 inches of 6061 1x1 aluminum box tubing 12 custom 1 inch OD urethane rollers with internal bearings 8 box tube crush blocks for rigidity PA6-CF 3D printed Bogies ~9.8 lbs of box tubing ~15 lbs of total weight Onshape Links: WIP GROW-Bot Assembly Gantry Assembly Thank you so much for reading this, if you are interested in this project join #grow-bot in slack to participate! Watch the animation below that better illustrates the design:"}, {"post_id": 7262, "ts": "2026-06-12T03:35:23Z", "hours": 1.0972, "text": "Updates! The Name Fist off, to address the obvious… the new name! Thought process: “GROW + Robot = GROW-Bot!” Please leave me your thoughts down below! Misc I spent most of today doing miscellaneous things, like adding a dirt texture to the garden bed and designing a greenhouse concept framework. I also decided to ditch the lightening on some of the aluminum since the weight simply doesn’t matter in this scenario GROW-Bot WIP CAD Greenhouse CAD Tomorrow I am going to design the turreted gantry system and possibly start work on the superstructure. The channel name has also now changed to #grow-bot so join to keep up with development and to help out!"}, {"post_id": 6647, "ts": "2026-06-11T04:24:12Z", "hours": 1.7297, "text": "Garden Bed Rails What do they do? Today I designed the rails that garden robot I am designing will traverse on. How do they work? They are mounted to 2x4s that are directly embedded in the ground and to the main structure of the garden bed. What to do next? Tomorrow is the big day when I start work on the actual main gantry part of the robot. I hope to have the 3d printed bogie (3 wheel structure that wraps around rails) and the turret assembly designed by the end of the day tomorrow. This robot is coming together! Join #grow-bot in slack to keep up with updates and/or ask questions! Onshape Link"}, {"post_id": 5388, "ts": "2026-06-09T04:15:40Z", "hours": 2.0239, "text": "Differential Wrist Mechanism This is the V1 CAD for the differential gear mechanism that will allow for the toolhead to rotate and pitch forward on my automated gardening robot called GROW. Technical Description: A half inch hex axel is mounted to the larger bevel gear and the gantry frame. The main cartriage is largely floating and only supported by the chain and gear since both motor walls and bevel gears are on bearings and floating freely on the main axel. When both motors spin together, The mechanism pitches up and down. When they spin opposite, it rotates Please watch the attached animation that illustrates the mechanism (the chain is not animated), and comment below with any questions or suggestions. Also, join the slack channel #grow-bot to participate or observe the development of the robot, I am also searching for programming help once the fabrication phase is over. DIFFERENTIAL CAD LINK Garden Bed V1 CAD Crayon Block CAD Master Sketch (top/bottom) Thank you all so much! Please give me feedback on how to improve my devlogs, and consider following if you want to see where this is going!"}, {"post_id": 4716, "ts": "2026-06-08T04:24:43Z", "hours": 1.7539, "text": "Garden Bed CAD V1 - ONSHAPE LINK I finished Cadding the garden bed including screw positions and soil depth. I am taking a break from the wrist mechanism as I discovered a major flaw with the mechanism that needs some adjustment which I will hopefully complete tomorrow. Join #grow-bot to keep up with the progress!"}, {"post_id": 4542, "ts": "2026-06-07T21:43:34Z", "hours": 3.2203, "text": "Differential Toolhead V0 - CLICK HERE FOR ONSHAPE LINK I just finished Modeling the differential gearbox in the toolhead, It is powered by 2 stepper motors, and chain. I am hoping to print out these parts and make a prototype later today Join #grow-bot to keep up with development"}, {"post_id": 3244, "ts": "2026-06-06T02:29:25Z", "hours": 2.4358, "text": "Master Sketches This is the project moving from Crayon Block CAD to Master sketching all of the dimensions and plate layouts in side and top view. I dimensioned the CORE-XY upper gantry system, and all of the rollers and turret layers on the base. Also, I have decided to instead of making the bed two rows of garden beds, it will loop around the top to form a U-shaped structure in order to provide increased working area. The total dimensions are 16ft x 10 ft Master Sketch Onshape Document MS To-do: Differential wrist mechanism Tool head Top View Join #grow-bot to keep up with development"}, {"post_id": 2544, "ts": "2026-06-05T02:47:32Z", "hours": 1.505, "text": "Crayon CAD - Differential Gearbox I designed the differential gear box mechanism in CAD today, I didn’t have tons of time to work on it, but I got the general dimensions figured out. It will operate as a differential gearbox for the rotation and the pitch of the main tool-head. I used gearlabs to generate the bevel gears. I also worked on some designs for the tool head system, and am considering weather or not a tool changer is necessary Join #grow-bot for more updates"}, {"post_id": 1887, "ts": "2026-06-04T03:19:40Z", "hours": 2.0742, "text": "Crayon CAD #2 - Main Gantry Structure This is what I like to call “ Crayon CAD ” or when the project exists as undetailed blobs. I have just finished working out some of the basic layout of the gantry structure. It is going to be cantilevered over One side of the rotating base, and the extendable carriage will ride along the 72 inch long 2x2 aluminum tube using bearings and belts. The main beam is supported by two 2x2 aluminum tubes that form a triangle of support, this design allows for maximum travel length and minimal interaction with plants. FYI I am currently designing the robot to be compatble with any plant up to 36 inches tall, this includes some smaller types of tomato, pepper, and bean plants. I also sketched out the roller gantry design before CADing it. Join #grow-bot to keep up with development!"}, {"post_id": 592, "ts": "2026-06-02T02:42:37Z", "hours": 0.9086, "text": "Crayon CAD - The Garden bed This is what I like to call “ Crayon CAD ” or when the project exists as undetailed blobs. Crayon CAD for the garden bed base is complete! This will be a good frame to start making rough CAD for the gantry system and elevators, along with spacing out the general dimensions before getting into mastersketches. The current Idea is that the gantry will ride along these 1.5” aluminum tubes, and will be externally belted for linear motion Join #grow-bot to keep up with development and help out!"}, {"post_id": 516, "ts": "2026-06-02T00:08:05Z", "hours": 0.9736, "text": "Preliminary design constraints and sketches for garden robot"}]...
|
Title: GROW-Bot | Garden Robot for Organic Work by Title: GROW-Bot | Garden Robot for Organic Work by @sukiwyatt | Stardance
Devlogs:
Preliminary design constraints and sketches for garden robot
Crayon CAD - The Garden bed This is what I like to call “ Crayon CAD ” or when the project exists as undetailed blobs. Crayon CAD for the garden bed base is complete! This will be a good frame to start making rough CAD for the gantry system and elevators, along with spacing out the general dimensions before getting into mastersketches. The current Idea is that the gantry will ride along these 1.5” aluminum tubes, and will be externally belted for linear motion Join #grow-bot to keep up with development and help out!
Crayon CAD #2 - Main Gantry Structure This is what I like to call “ Crayon CAD ” or when the project exists as undetailed blobs. I have just finished working out some of the basic layout of the gantry structure. It is going to be cantilevered over One side of the rotating base, and the extendable carriage will ride along the 72 inch long 2x2 aluminum tube using bearings and belts. The main beam is supported by two 2x2 aluminum tubes that form a triangle of support, this design allows for maximum travel length and minimal interaction with plants. FYI I am currently designing the robot to be compatble with any plant up to 36 inches tall, this includes some smaller types of tomato, pepper, and bean plants. I also sketched out the roller gantry design before CADing it. Join #grow-bot to keep up with development!
Crayon CAD - Differential Gearbox I designed the differential gear box mechanism in CAD today, I didn’t have tons of time to work on it, but I got the general dimensions figured out. It will operate as a differential gearbox for the rotation and the pitch of the main tool-head. I used gearlabs to generate the bevel gears. I also worked on some designs for the tool head system, and am considering weather or not a tool changer is necessary Join #grow-bot for more updates
Master Sketches This is the project moving from Crayon Block CAD to Master sketching all of the dimensions and plate layouts in side and top view. I dimensioned the CORE-XY upper gantry system, and all of the rollers and turret layers on the base. Also, I have decided to instead of making the bed two rows of garden beds, it will loop around the top to form a U-shaped structure in order to provide increased working area. The total dimensions are 16ft x 10 ft Master Sketch Onshape Document MS To-do: Differential wrist mechanism Tool head Top View Join #grow-bot to keep up with development
Differential Toolhead V0 - CLICK HERE FOR ONSHAPE LINK I just finished Modeling the differential gearbox in the toolhead, It is powered by 2 stepper motors, and chain. I am hoping to print out these parts and make a prototype later today Join #grow-bot to keep up with development
Garden Bed CAD V1 - ONSHAPE LINK I finished Cadding the garden bed including screw positions and soil depth. I am taking a break from the wrist mechanism as I discovered a major flaw with the mechanism that needs some adjustment which I will hopefully complete tomorrow. Join #grow-bot to keep up with the progress!
Differential Wrist Mechanism This is the V1 CAD for the differential gear mechanism that will allow for the toolhead to rotate and pitch forward on my automated gardening robot called GROW. Technical Description: A half inch hex axel is mounted to the larger bevel gear and the gantry frame. The main cartriage is largely floating and only supported by the chain and gear since both motor walls and bevel gears are on bearings and floating freely on the main axel. When both motors spin together, The mechanism pitches up and down. When they spin opposite, it rotates Please watch the attached animation that illustrates the mechanism (the chain is not animated), and comment below with any questions or suggestions. Also, join the slack channel #grow-bot to participate or observe the development of the robot, I am also searching for programming help once the fabrication phase is over. DIFFERENTIAL CAD LINK Garden Bed V1 CAD Crayon Block CAD Master Sketch (top/bottom) Thank you all so much! Please give me feedback on how to improve my devlogs, and consider following if you want to see where this is going!
Garden Bed Rails What do they do? Today I designed the rails that garden robot I am designing will traverse on. How do they work? They are mounted to 2x4s that are directly embedded in the ground and to the main structure of the garden bed. What to do next? Tomorrow is the big day when I start work on the actual main gantry part of the robot. I hope to have the 3d printed bogie (3 wheel structure that wraps around rails) and the turret assembly designed by the end of the day tomorrow. This robot is coming together! Join #grow-bot in slack to keep up with updates and/or ask questions! Onshape Link
Updates! The Name Fist off, to address the obvious… the new name! Thought process: “GROW + Robot = GROW-Bot!” Please leave me your thoughts down below! Misc I spent most of today doing miscellaneous things, like adding a dirt texture to the garden bed and designing a greenhouse concept framework. I also decided to ditch the lightening on some of the aluminum since the weight simply doesn’t matter in this scenario GROW-Bot WIP CAD Greenhouse CAD Tomorrow I am going to design the turreted gantry system and possibly start work on the superstructure. The channel name has also now changed to #grow-bot so join to keep up with development and to help out!
Main Gantry Complete What does it do? The gantry is a frame that rolls on the aluminum tubing, it uses bogies to provide omnidirectional support (2 wheeled structures). How does it work? There are custom Urethane wheels on aluminum hubs that roll on the aluminum tubing, they are rotated 140 degrees from each other. The bogies attach to aluminum 6061 tube stock above it that forms the main superstructure for the turret to mount to. Interesting Technical Numbers 32 Bolts, 32 Lock nuts, 20 washers, 32 rivets 60 inches of 6061 2x1 aluminum box tubing 32 inches of 6061 1x1 aluminum box tubing 12 custom 1 inch OD urethane rollers with internal bearings 8 box tube crush blocks for rigidity PA6-CF 3D printed Bogies ~9.8 lbs of box tubing ~15 lbs of total weight Onshape Links: WIP GROW-Bot Assembly Gantry Assembly Thank you so much for reading this, if you are interested in this project join #grow-bot in slack to participate! Watch the animation below that better illustrates the design:
I’m Back! (For real ) I have had to deal with some personal issues and illness over the course of the past few weeks, and was unable to work on the robot. However, I am officially back to making progress. Here is a list of miscellaneous improvements I have made since the last devlog But I am seriously sorry for not updating folks on the status for the past few weeks. 🤦 Turret Structure Since I designed the main gantry assembly, I added the actually turret to the frame that uses 10 bearing stacks on shoulder screws to rotate and a cnc machined aluminum azimuth gear to rotate. Superstructure Mounting I am going to mount the main superstructure to the turret using a 3/16” walled 2x2 aluminum box tube with quarter inch bolts spanning both the turret plates for extra stability, I am using two large gussets to mount the 2x2 box tubing for the superstructure to the turret box tube. Superstructure The superstructure is comprised of 2x2 box tubes and aluminum gussets, I only have the main frame designed, and am currently working on the core-xy linear gantry for the toolhead. Belt Tensioning I also designed a belt tensioning system for the main belt that allows the gantry to pull itself along the garden bed rails. RELEVANT CAD LINKS FULL CAD - GROW Bot (Greenhouse + Garden bed) Superstructure TLA Full Gantry Assembly (TURRET INCLUDED) I sincerely apologize for not keeping anyone following the progress of this project up to date with its happenings, but I promise to be better in the future To join the conversation around this project join the slack channel #grow-bot
Core-XY Gearbox Today I built the gearbox component of the core-xy gantry system, I will send an update later today on the rest of the gantry. The top motor drives the far end of the gantry through a dead-axel gear and pully riding on a through hex axel. The bottom motor directly powers the through axel for the near side pully. CAD LINKS: Superstructure TLA (Includes gearbox) Full Robot Join the slack channel #grow-bot to keep up with development
Core-XY Gantry System Complete! What is Core-XY? Core-XY is a popular belt-driven motion system commonly used in 3D printers and CNC machines. Instead of having one motor move the X-axis and another move the Y-axis independently, Core-XY uses two stationary motors that work together using a single, continuous loop of belt to move the toolhead diagonally, horizontally, or vertically. Details The Gantry hub is 3D printed out of PA6-CF Nylon for maximum strength, and it has many through bolts that support the bearings and pullies that double as rigitidy in the structure. There are bearings that ride on the large 2x2 aluminum tube that allow for side to side motion Other bearings ride on the smaller 1x1 aluminum tube that allows for up and down motion. The gantry was designed to be as light-weight as possible due to it riding to the far end of the cantilevered aluminum superstructure. How does the belt work? The best way to describe the shape of the belt is a plus symbol, since it goes from the left to the center to the top to the center then to the right ect. The belt is terminated and tensioned at the bottom of the 1x1 aluminum tube, this is what allows for all of the motion since the tube is effectively riding the belt. I don’t know if that makes any sense lol, but pretty much if the motors spin together it translates left and right, and if they spin in opposite directions, it will go up and down. CAD LINKS Main Gantry Assembly Core-XY Gantry TLA FULL ROBOT If you want to stay involved in the making this project a reality, I recommend joining the slack channel #grow-bot to help out or ask questions.
Belt Tensioner! Today I designed the belt tensioner for where the belts terminate on the gantry, it uses ratchets to tension pullies with the belt wrapped around them. I also designed the mounting piece for the wrist mechanism. CAD Links Turreted Gantry Main Assembly Core-XY Gantry GROW-BOT FULL If you want to stay involved in the making this project a reality, I recommend joining the slack channel #grow-bot to help out or ask questions.
Large Design Updates! MOST OF THE CONTENT FOR THIS DEVLOG IS CONTAINED IN THE ATTATCHED EXPLANATION VIDEO TLDR: I lightened the main gantry structure and gussets in an FRC style in order to keep weight and inertia down. I built a custom configuration panel that allows the viewer to select through different configurations including the greenhouse, garden bed, ground, or crops I built a coordinate variable system in order to help me control all 7 axis of movement in the system individually. I added vegetation in the garden bed in order to better convey the purpose of the system. SEE FOR YOURSELF! If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot .
Traversal X₁ Axis Motor Today I made the mount for the stepper motor that runs the belt for the x-axis What is the motor’s purpose? It will allow the robot to move up to 120 inches down the garden bed. It engages with a belt that pulls the robot down aluminum tubes to traverse the full length Technical details It uses a 1x1 aluminum tube with 1/8 inch walls to mount to the main turret plate and them it houses the motor, pully and idlers for the belt I also shifted the entire belt over to the left for a better motor fit. CAD: FULL ROBOT Turret Only If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot .
Electronics! Today I made an electronics box and modelled the spacing of the main electronic components. Electronics specifications: SBC: Raspberry Pi 5 (4GB) Motion controller: BTT Octopus Pro V1.1 (H723) Closed-loop drivers: StepperOnline CL57T V4.1 48V PSU: Meanwell SE-200-48 or similar Enclosure: Joinfworld Outdoor Electrical Box, 16x11x6 ABS Plastic The box is held up in the superstructure by four 3D prints and cable ties. FULL ROBOT Main Gantry + Electronics If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot .
BOM Part List Configuration I did the long and tedious Task of going through every single part in the project and give each one a custom name, description and product details. I did this because of onshapes built in BOM tool, so now it gives me a full list of needed parts and quantities. I edited the properties of over 300 parts to do this. FULL ROBOT If you want to be more engaged in this projects trajectory or have any suggestions or questions, join the slack channel #grow-bot .
BOM Complete The BOM has been completed, I am now ready to submit for funding...
|
1792695170.5879874
|
1793299970.5879874
|
|
3246
|
My awesome macropad! by @yashaswi_g | Stardance
|
yashaswi_g
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My awesome macropad! by @yashaswi_g | Stard Title: My awesome macropad! by @yashaswi_g | Stardance...
|
1792723662.7370396
|
1793328462.7370396
|
|
3247
|
A Roblox Zombie Game by @Nelson | Stardance
|
Nelson
|
0
|
1.28
|
0
|
[]
|
[{"post_id": 11123, "ts": "202 [{"post_id": 11123, "ts": "2026-06-18T06:04:47Z", "hours": 1.0169, "text": "Loading Screen Today I created a loading screen for my game. After optimizing it to take all resources into account and load the more important materials first before allowing players into the game gives importance to what my game will look like. I watched 3 different tutorials and then read through each line of code to understand what was being written before attempting to implement a background of my own before deciding simple is best. Attached below is what my loading looks like. Next steps are the lobby design and then the different features."}, {"post_id": 9115, "ts": "2026-06-15T07:49:01Z", "hours": 0.2669, "text": "Creating an NPC in Roblox Studios as a first time user"}]...
|
Title: A Roblox Zombie Game by @Nelson | Stardance Title: A Roblox Zombie Game by @Nelson | Stardance
Devlogs:
Creating an NPC in Roblox Studios as a first time user
Loading Screen Today I created a loading screen for my game. After optimizing it to take all resources into account and load the more important materials first before allowing players into the game gives importance to what my game will look like. I watched 3 different tutorials and then read through each line of code to understand what was being written before attempting to implement a background of my own before deciding simple is best. Attached below is what my loading looks like. Next steps are the lobby design and then the different features....
|
1792514901.1588883
|
1793119701.1588883
|
|
3248
|
Untitled by @rishisai_poola | Stardance
|
rishisai_poola
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @rishisai_poola | Stardance
|
1792558265.4586642
|
1793163065.4586642
|
|
3249
|
Untitled by @yashaswi_g | Stardance
|
yashaswi_g
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: Untitled by @yashaswi_g | Stardance
|
1792565630.2509902
|
1793170430.2509902
|
|
3250
|
My first slack bot! by @yashaswi_g | Stardance
|
yashaswi_g
|
0
|
0.0
|
0
|
[]
|
[]
|
Title: My first slack bot! by @yashaswi_g | Starda Title: My first slack bot! by @yashaswi_g | Stardance...
|
1792677137.6991892
|
1793281937.6991892
|